view src/g23m-gsm/alr2/cnf_alr.h @ 261:841a848ba762

SPI SWE: clear any pending boot-time interrupts in spi_init() Charger plug/unplug hw logic in the Iota ABB has no built-in debouncing, thus electrical contact bounce on the charging power connection interface produces a lot of charger plug/unplug interrupts. When we boot in charging mode (charging power present at boot time and is presumably the cause of Switch-ON), some bounce may occur between the initial Iota Switch-ON action and Calypso firmware booting. By clearing any accumulated ITSTATREG interrupts on boot, we prevent these pre-boot interrupts from generating charger plug/unplug events to FCHG, which would upset smooth from-boot charging.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 14 May 2021 02:49:05 +0000
parents 3a14ee9a9843
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS
|  Modul   :  CNF_TIL
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  Dynamic Configuration for TI-Add On
+-----------------------------------------------------------------------------
*/

#ifndef CNF_ALR_H
#define CNF_ALR_H

/*==== CONSTANTS ==================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */
#define ALR_STD               "STD"
#define ALR_CONFIG            "MMI_MODEL"
#define ALR_MON_COUNT_IDLE    "MON_COUNT_IDLE"
#define ALR_MON_COUNT_DEDI    "MON_COUNT_DEDI"
#define ALR_RACH_FAILURE      "RACH_FAILURE"
#define ALR_TRC_DATA_IND      "TRC_DATA_IND"
#define ALR_EOTD              "EOTD_ON"

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

#endif