FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/audio_include/l1audio_abb.h @ 75:8697f358f505
backlight rework: Condat light driver accepts levels
The present change is another intermediate step on the path toward
new FreeCalypso backlight handling. At this intermediate step the
Condat light driver accepts 0-255 backlight levels driven by MFW,
and puts them out on PWL on Luna development boards. At the same
time on C139 it is now possible to turn on the display backlight
with or without the keypad bl - the lsb of the 0-255 backlight level
controls the keypad bl.
MFW presently drives only 0 and 255 backlight levels, thus there is
no visible behavioral change yet - but the plan for subsequent stages
of this backlight rework is to add a dimmed backlight state
(no keypad bl on C139) during active calls.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 24 Oct 2020 20:44:04 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/* * Filename l1audio_abb.h * Copyright 2003 (C) Texas Instruments * * */ #define ABB_L1_WRITE(addr,data) (((data) << 6) | (addr) | 0x01) void ABB_CAL_UlVolume (UWORD8 pga_index); void ABB_CAL_DlVolume (UWORD8 volume_index, UWORD8 pga_index); void ABB_UlVolume (UWORD8 volume_index); void ABB_DlVolume (UWORD8 volume_index); void ABB_DlMute (BOOL mute); void ABB_SideTone (UWORD8 volume_index); void ABB_Audio_Config (UWORD16 data); void ABB_Audio_Config_2 (UWORD16 data); void ABB_UlMute (BOOL mute); void ABB_Audio_Control (UWORD16 data); void ABB_Audio_On_Off (UWORD16 data); void ABB_Audio_Volume (UWORD16 data); void ABB_Audio_PLL (UWORD16 data); void ABB_Audio_VBPop (UWORD16 data); void ABB_Audio_Delay_Init (UWORD8 delay);