view src/cs/layer1/gtt_include/l1gtt_defty.h @ 75:8697f358f505

backlight rework: Condat light driver accepts levels The present change is another intermediate step on the path toward new FreeCalypso backlight handling. At this intermediate step the Condat light driver accepts 0-255 backlight levels driven by MFW, and puts them out on PWL on Luna development boards. At the same time on C139 it is now possible to turn on the display backlight with or without the keypad bl - the lsb of the 0-255 backlight level controls the keypad bl. MFW presently drives only 0 and 255 backlight levels, thus there is no visible behavioral change yet - but the plan for subsequent stages of this backlight rework is to add a dimmed backlight state (no keypad bl on C139) during active calls.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 20:44:04 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1GTT_DEFTY.H
 *
 *        Filename l1gtt_defty.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#ifndef _L1GTT_DEFTY_H_
#define _L1GTT_DEFTY_H_

#if (L1_GTT == 1)

  // GTT L1A/L1S COM structure
  //---------------------------

  typedef struct
  {
    BOOL  start;
    BOOL  stop;
  }
  T_GTT_COMMAND;

  typedef struct
  {
    UWORD8  scen_enable;
    UWORD16 rate;
  }
  T_GTT_TEST;

  typedef struct
  {
    T_GTT_TEST    test;
    T_GTT_COMMAND command;
  }
  T_GTT_TASK;

  // FIFO structure
  //----------------

    #if (CODE_VERSION == SIMULATION)

      // DSP address do not exist --> 32-bit addresses
      typedef struct
      {
        API *ptr_read;         //API pointer to current data to read
        API *ptr_write;        //API pointer to free area to write to
        API *buffer_start;     //pointer to start
        UWORD16 buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #else

      typedef struct
      {
        API ptr_read;         //API pointer to current data to read
        API ptr_write;        //API pointer to free area to write to
        API buffer_start;     //pointer to start
        API buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #endif

  // GTT test data
  //--------------

  typedef struct
  {
    UWORD16 scen_index;
    UWORD16 scen_length;
    char   *scen_ptr;
    UWORD8  chars_to_push;
    UWORD16 frame_count;
  }
  T_GTT_TEST_L1S;

#endif 


#endif //_L1GTT_DEFTY_H_