view src/cs/layer1/p_include/l1p_sign.h @ 75:8697f358f505

backlight rework: Condat light driver accepts levels The present change is another intermediate step on the path toward new FreeCalypso backlight handling. At this intermediate step the Condat light driver accepts 0-255 backlight levels driven by MFW, and puts them out on PWL on Luna development boards. At the same time on C139 it is now possible to turn on the display backlight with or without the keypad bl - the lsb of the 0-255 backlight level controls the keypad bl. MFW presently drives only 0 and 255 backlight levels, thus there is no visible behavioral change yet - but the plan for subsequent stages of this backlight rework is to add a dimmed backlight state (no keypad bl on C139) during active calls.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 20:44:04 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1P_SIGN.H
 *
 *        Filename l1p_sign.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#define P_GPRS  ( P_L1C + 2 )

// Messages Packet Transfer <-> L1A
#define MPHP_SINGLE_BLOCK_REQ             ( ( P_GPRS << 8 ) | 1  )
#define MPHP_SINGLE_BLOCK_CON             ( ( P_GPRS << 8 ) | 2  )
#define MPHP_STOP_SINGLE_BLOCK_REQ        ( ( P_GPRS << 8 ) | 3  )
#define MPHP_STOP_SINGLE_BLOCK_CON        ( ( P_GPRS << 8 ) | 4  )
#define L1P_SINGLE_BLOCK_CON              ( ( P_GPRS << 8 ) | 5  )

#define MPHP_ASSIGNMENT_REQ               ( ( P_GPRS << 8 ) | 6  )
#define MPHP_ASSIGNMENT_CON               ( ( P_GPRS << 8 ) | 7  )

#define MPHP_TBF_RELEASE_REQ              ( ( P_GPRS << 8 ) | 8  )
#define MPHP_TBF_RELEASE_CON              ( ( P_GPRS << 8 ) | 9  )

#define MPHP_REPEAT_UL_FIXED_ALLOC_REQ    ( ( P_GPRS << 8 ) | 10 )
#define MPHP_REPEAT_UL_FIXED_ALLOC_CON    ( ( P_GPRS << 8 ) | 11 )

#define MPHP_PDCH_RELEASE_REQ             ( ( P_GPRS << 8 ) | 12 )
#define MPHP_PDCH_RELEASE_CON             ( ( P_GPRS << 8 ) | 13 )

#define MPHP_TIMING_ADVANCE_REQ           ( ( P_GPRS << 8 ) | 14 )
#define MPHP_TIMING_ADVANCE_CON           ( ( P_GPRS << 8 ) | 15 )

#define MPHP_UPDATE_PSI_PARAM_REQ         ( ( P_GPRS << 8 ) | 16 )
#define MPHP_UPDATE_PSI_PARAM_CON         ( ( P_GPRS << 8 ) | 17 )


#define MPHP_RA_REQ                       ( ( P_GPRS << 8 ) | 18 )
#define MPHP_RA_CON                       ( ( P_GPRS << 8 ) | 19 )
#define MPHP_RA_STOP_REQ                  ( ( P_GPRS << 8 ) | 20 )
#define MPHP_RA_STOP_CON                  ( ( P_GPRS << 8 ) | 21 )

#define MPHP_POLLING_RESPONSE_REQ         ( ( P_GPRS << 8 ) | 22 )
#define MPHP_POLLING_IND                  ( ( P_GPRS << 8 ) | 23 )

#define L1P_RA_DONE                       ( ( P_GPRS << 8 ) | 24 )

// Messages Packet Idle <-> L1A
#define MPHP_START_PCCCH_REQ              ( ( P_GPRS << 8 ) | 25 )
#define MPHP_STOP_PCCCH_REQ               ( ( P_GPRS << 8 ) | 26 )
#define MPHP_STOP_PCCCH_CON               ( ( P_GPRS << 8 ) | 27 )
#define MPHP_SCELL_PBCCH_REQ              ( ( P_GPRS << 8 ) | 28 )
#define MPHP_SCELL_PBCCH_STOP_REQ         ( ( P_GPRS << 8 ) | 29 )
#define MPHP_SCELL_PBCCH_STOP_CON         ( ( P_GPRS << 8 ) | 30 )
#define MPHP_CR_MEAS_REQ                  ( ( P_GPRS << 8 ) | 31 )
#define MPHP_CR_MEAS_STOP_REQ             ( ( P_GPRS << 8 ) | 32 )
#define MPHP_CR_MEAS_STOP_CON             ( ( P_GPRS << 8 ) | 33 )
#define MPHP_INT_MEAS_REQ                 ( ( P_GPRS << 8 ) | 34 )
#define MPHP_INT_MEAS_STOP_REQ            ( ( P_GPRS << 8 ) | 35 )
#define MPHP_INT_MEAS_STOP_CON            ( ( P_GPRS << 8 ) | 36 )
#define MPHP_NCELL_PBCCH_REQ              ( ( P_GPRS << 8 ) | 37 )
#define MPHP_NCELL_PBCCH_STOP_REQ         ( ( P_GPRS << 8 ) | 38 )
#define MPHP_NCELL_PBCCH_STOP_CON         ( ( P_GPRS << 8 ) | 39 )

#define MPHP_DATA_IND                     ( ( P_GPRS << 8 ) | 40 )
#define MPHP_CR_MEAS_IND                  ( ( P_GPRS << 8 ) | 41 )
#define MPHP_INT_MEAS_IND                 ( ( P_GPRS << 8 ) | 42 )
#define MPHP_TINT_MEAS_IND                ( ( P_GPRS << 8 ) | 43 )
#define MPHP_NCELL_PBCCH_IND              ( ( P_GPRS << 8 ) | 44 )
#define MPHP_TCR_MEAS_REQ                 ( ( P_GPRS << 8 ) | 45 )
#define MPHP_TCR_MEAS_IND                 ( ( P_GPRS << 8 ) | 46 )
#define MPHP_TCR_MEAS_STOP_REQ            ( ( P_GPRS << 8 ) | 47 )
#define MPHP_TCR_MEAS_STOP_CON            ( ( P_GPRS << 8 ) | 48 )

/*** L1S -> L1A communication ***/
#define L1P_PALLC_INFO                    ( ( P_GPRS << 8)  | 49)
#define L1P_PNP_INFO                      ( ( P_GPRS << 8)  | 50)
#define L1P_PEP_INFO                      ( ( P_GPRS << 8)  | 51)
#define L1P_PBCCHS_INFO                   ( ( P_GPRS << 8)  | 52)
#define L1P_PACCH_INFO                    ( ( P_GPRS << 8)  | 53)
#define L1P_CR_MEAS_DONE                  ( ( P_GPRS << 8)  | 54)
#define L1P_TRANSFER_DONE                 ( ( P_GPRS << 8)  | 55)
#define L1P_TCR_MEAS_DONE                 ( ( P_GPRS << 8)  | 56)
#define L1P_TBF_RELEASED                  ( ( P_GPRS << 8)  | 57)
#define L1P_ITMEAS_IND                    ( ( P_GPRS << 8)  | 58)
#define L1P_POLL_DONE                     ( ( P_GPRS << 8)  | 59)
#define L1P_PDCH_RELEASED                 ( ( P_GPRS << 8)  | 60)
#define L1P_TA_CONFIG_DONE                ( ( P_GPRS << 8)  | 61)
#define L1P_PBCCHN_INFO                   ( ( P_GPRS << 8)  | 62)
#define L1P_REPEAT_ALLOC_DONE             ( ( P_GPRS << 8)  | 63)
#define L1P_ALLOC_EXHAUST_DONE            ( ( P_GPRS << 8)  | 64)