view src/cs/layer1/tm_cust0/l1tm_tpu10.c @ 75:8697f358f505

backlight rework: Condat light driver accepts levels The present change is another intermediate step on the path toward new FreeCalypso backlight handling. At this intermediate step the Condat light driver accepts 0-255 backlight levels driven by MFW, and puts them out on PWL on Luna development boards. At the same time on C139 it is now possible to turn on the display backlight with or without the keypad bl - the lsb of the 0-255 backlight level controls the keypad bl. MFW presently drives only 0 and 255 backlight levels, thus there is no visible behavioral change yet - but the plan for subsequent stages of this backlight rework is to add a dimmed backlight state (no keypad bl on C139) during active calls.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 20:44:04 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_TPU10.C
 *
 *        Filename l1tm_tpu10.c
 *        Version  1.4
 *        Date     01/10/03
 * 
 ************* Revision Controle System Header *************/

#include "l1_confg.h"
#if (TESTMODE && (RF==10))

#include "tm_defs.h"
#include "l1_const.h"
#include "l1_types.h"
					
#include "l1tm_defty.h"
#include "l1tm_cust.h"
#include "l1tm_tpu10.h"

#if (AUDIO_TASK == 1)
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
#endif
  
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif

#include "l1_defty.h"
#include "l1_msgty.h"
#include "l1_tabs.h"

#include "l1tm_msgty.h"
#include "l1tm_varex.h"

#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
  #include "spi_drv.h"
#endif   

#include "sys_types.h"
#include "general.h"
#include "l1_time.h"
#include "tpudrv.h"
#include "tpudrv10.h"
#include <string.h>

// Import band configuration from Flash module (need to replace by an access function)


// External function prototypes

void Cust_tm_tpu_table_write        (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[])
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/


    // fill in the cid
    tm_return->cid = TPU_TABLE_WRITE;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

void Cust_tm_tpu_table_read         (T_TM_RETURN *tm_return, WORD8 index)
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_READ;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

#endif //TESTMODE