FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/l4_tim.h @ 75:8697f358f505
backlight rework: Condat light driver accepts levels
The present change is another intermediate step on the path toward
new FreeCalypso backlight handling. At this intermediate step the
Condat light driver accepts 0-255 backlight levels driven by MFW,
and puts them out on PWL on Luna development boards. At the same
time on C139 it is now possible to turn on the display backlight
with or without the keypad bl - the lsb of the 0-255 backlight level
controls the keypad bl.
MFW presently drives only 0 and 255 backlight levels, thus there is
no visible behavioral change yet - but the plan for subsequent stages
of this backlight rework is to add a dimmed backlight state
(no keypad bl on C139) during active calls.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 24 Oct 2020 20:44:04 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : L4_TIM +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions of timer indices +----------------------------------------------------------------------------- */ /* * Timer Indices */ #define SMI_TBACKLIGHT 0 #define SMI_TSLIDER 1 #define SMI_TSHIFTKEY 2 #define SMI_TUNIVERSAL 3 #define ACI_TRING 4 #define ACI_TMPTY 5 #define ACI_TFIT 6 #define ACI_TDTMF 7 #if defined (FAX_AND_DATA) #define FIT_RUN 8 #endif #define AOC_CALLTIMER 9 #define AOC_AOCTIMER 10 #define MAX_AOC_TIMER 7 /* should be changed to MAX_CALL_NR */ /* timers in between are reserved for AOC */ #define MFW_TIMER (AOC_AOCTIMER+MAX_AOC_TIMER) #define ACI_IPR (MFW_TIMER + 1) #define ACI_TECT (ACI_IPR + 1) #define ACI_TDELAY (ACI_TECT + 1) #if defined FF_EOTD /*&& defined _SIMULATION_*/ #define ACI_LC_1 (ACI_TDELAY+1) #define ACI_LC_2 (ACI_LC_1+1) #define ACI_LC_3 (ACI_LC_1+2) #define ACI_LC_4 (ACI_LC_1+3) #define ACI_LC_5 (ACI_LC_1+4) #endif #ifndef FF_EOTD #define ACI_REPEAT_HND (ACI_TDELAY +1) #else #define ACI_REPEAT_HND (ACI_LC_1+5) #endif /* FF_EOTD */ #ifdef SIM_TOOLKIT #define ACI_SAT_MAX_DUR_HND (ACI_REPEAT_HND +1) #define ACI_CNMA_TIMER_HANDLE (ACI_SAT_MAX_DUR_HND+1) #else #define ACI_CNMA_TIMER_HANDLE (ACI_REPEAT_HND+1) #endif /* SIM_TOOLKIT */ #ifdef VOCODER_FUNC_INTERFACE #define ACI_VOCODER (ACI_CNMA_TIMER_HANDLE+1) #endif #ifdef SIM_PERS #ifdef VOCODER_FUNC_INTERFACE #define ACI_UNLOCK_TIMER_HANDLE (ACI_VOCODER+1) #else #define ACI_UNLOCK_TIMER_HANDLE (ACI_CNMA_TIMER_HANDLE+1) #endif #endif #define ACI_REPEAT_1 5000 /* 5 sec for waiting for 1th redialling */ #define ACI_REPEAT_2_4 60000 /* 1 min for waiting for 2th to 4th redialling */ #define ACI_CNMA_TIMER_VALUE 15000 /* 15 sec. for waiting for the +CNMA */ #define ACI_DELAY_TIMER 5000 /* 5 sec delay for various REDIAL attempts */ #ifdef SIM_PERS #define ACI_UNLOCK_TIMER 10000 /* 2 sec delay for various wrong unlock/unblock attempts */ #endif