view src/g23m-aci/aci_ext/aci_ext_pers_cus.h @ 75:8697f358f505

backlight rework: Condat light driver accepts levels The present change is another intermediate step on the path toward new FreeCalypso backlight handling. At this intermediate step the Condat light driver accepts 0-255 backlight levels driven by MFW, and puts them out on PWL on Luna development boards. At the same time on C139 it is now possible to turn on the display backlight with or without the keypad bl - the lsb of the 0-255 backlight level controls the keypad bl. MFW presently drives only 0 and 255 backlight levels, thus there is no visible behavioral change yet - but the plan for subsequent stages of this backlight rework is to add a dimmed backlight state (no keypad bl on C139) during active calls.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 20:44:04 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  J:\g23m-aci\aci_ext\aci_ext_pers_cus.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 

/*
   This is the initial setup for the customisation of MMI security. 
   Additional personalisation will be added at a later stage.
 */
T_ACI_PERS_MMI_DATAS MMI_personalisation_status =
{
   0x02,                // State disabled no pin required
   0x00,                // Count
   0x03,                // Max Count
   0x05,                // Pwd length
   0x21,0x43,0xF5,      // Current code BCD
   0x21,0x43,0xF5       // Original code BCD
};
   
#ifdef SIM_PERS

T_SEC_DRV_CATEGORY *personalisation_nw;

T_SEC_DRV_CATEGORY *personalisation_ns;

T_SEC_DRV_CATEGORY *personalisation_sp;

T_SEC_DRV_CATEGORY *personalisation_cp;

T_SEC_DRV_CATEGORY *personalisation_sim;

T_SEC_DRV_CATEGORY *personalisation_bnw;

T_SEC_DRV_CATEGORY *personalisation_first_sim;
#endif