view src/g23m-gsm/ss/cus_ss.h @ 75:8697f358f505

backlight rework: Condat light driver accepts levels The present change is another intermediate step on the path toward new FreeCalypso backlight handling. At this intermediate step the Condat light driver accepts 0-255 backlight levels driven by MFW, and puts them out on PWL on Luna development boards. At the same time on C139 it is now possible to turn on the display backlight with or without the keypad bl - the lsb of the 0-255 backlight level controls the keypad bl. MFW presently drives only 0 and 255 backlight levels, thus there is no visible behavioral change yet - but the plan for subsequent stages of this backlight rework is to add a dimmed backlight state (no keypad bl on C139) during active calls.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 24 Oct 2020 20:44:04 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CUS_SS
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Custom dependent definitions for SS of the
|             mobile station
|             
|             Use this header for definitions to integrate the
|             protocol stack entity SS in your target system !
+----------------------------------------------------------------------------- 
*/ 

#ifndef CUS_SS_H
#define CUS_SS_H

/*==== CONSTANTS ==================================================*/
 /*
 * VSI_CALLER
 *
 * Description :  For multithread applications the constant VSI_CALLER
 *                must be defined to identify the calling thread of the
 *                VSI-Interface. This must be done correponding to the
 *                type of T_VSI_CALLER in VSI.H. The comma symbol is
 *                neccessary because the vsi-functions are called
 *                like this vsi_xxx (VSI_CALLER par2, par3 ...)
 */
#if defined (NEW_FRAME)
#ifdef OPTION_MULTITHREAD
#define VSI_CALLER ss_handle,
#define VSI_CALLER_SINGLE ss_handle
#else
#define VSI_CALLER
#endif
#else
#ifdef OPTION_MULTITHREAD
#define VSI_CALLER SS_NAME,
#else
#define VSI_CALLER
#endif
#endif

/*
 * VERSION
 *
 * Description :  The constants define the type and the value
 *                of a version identification. The version
 *                is part of the monitor struct.
 */


#define T_VERSION   char
#define VERSION_SS  "SS 1.0"

#endif