view cdg-hybrid/cdginc/p_udpa.val @ 281:a75eefbf8be4

Phone boot with PWON: weed out short button presses Every standard end user phone has a design provision, most naturally implemented in firmware, whereby the PWON button effects a boot only if it is held down long enough - short presses of this PWON button are detected, assumed to be spurious and cause the fw to power back off instead of proceeding with boot. The present change introduces this standard function in FreeCalypso.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 24 Sep 2021 02:03:08 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_udpa.val                                                     |
| SOURCE  : "sap\udpa.pdf"                                                 |
| LastModified : "2003-08-26"                                              |
| IdAndVersion : "8444.103.02.006"                                         |
| SrcFileTime  : "Thu Nov 29 09:56:38 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_UDPA_VAL
#define P_UDPA_VAL


#define CDG_ENTER__P_UDPA_VAL

#define CDG_ENTER__FILENAME _P_UDPA_VAL
#define CDG_ENTER__P_UDPA_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_UDPA_VAL__LAST_MODIFIED _2003_08_26
#define CDG_ENTER__P_UDPA_VAL__ID_AND_VERSION _8444_103_02_006

#define CDG_ENTER__P_UDPA_VAL__SRC_FILE_TIME _Thu_Nov_29_09_56_38_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_UDPA_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_dti_conn
 */
#define UDPA_CONNECT_DTI               (0x0)      /* Connect DTI2 to UDP            */
#define UDPA_DISCONNECT_DTI            (0x1)      /* Disconnect DTI2 from UDP       */

/*
 * Value constants for VAL_link_id
 */
#define UDPA_LINK_ID_DEFAULT           (0x0)      /* Default link id                */

/*
 * Value constants for VAL_dti_direction
 */
#define UDPA_DTI_TO_HIGHER_LAYER       (0x0)      /* DTI2 used normally             */
#define UDPA_DTI_TO_LOWER_LAYER        (0x1)      /* DTI2 is inverted               */

/*
 * Value constants for VAL_cmd
 */
#define UDPA_CONFIG_UP                 (0x0)      /* enable the interface           */
#define UDPA_CONFIG_DOWN               (0x1)      /* disable the interface          */

/*
 * user defined constants
 */
#define UDPA_ENTITY_NAME_LEN           (0x6)      

#include "CDG_LEAVE.h"


#endif