FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/p_include/l1p_deft.h @ 19:aa868a5dcfd7
blobs: very few!
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 16 Oct 2020 07:38:28 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_DEFTY.H * * Filename l1p_deft.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ typedef struct { WORD32 rand; UWORD16 channel_request_data; UWORD8 bs_prach_blks; UWORD8 prach_alloc; UWORD32 fn_to_report; } T_PRACH_INFO; typedef union { UWORD16 prach_data[12]; UWORD8 cs1_data[24]; } T_CHAN_REQ_DATA; typedef struct { UWORD8 pol_resp_type; T_CHAN_REQ_DATA chan_req; UWORD32 fn; UWORD8 timing_advance; UWORD32 fn_to_report; } T_POLL_INFO; typedef struct { UWORD8 data_array[23]; UWORD8 tn; UWORD8 dl_tn_to_restore; UWORD8 activity; } T_SINGLE_BLOCK; typedef struct { UWORD32 SignalCode; UWORD8 assignment_id; UWORD8 synchro_tn; UWORD8 allocated_tbf; UWORD8 dl_tbf_synchro_timeslot; UWORD8 ul_tbf_synchro_timeslot; UWORD8 transfer_synchro_timeslot; UWORD8 assignment_command; UWORD8 multislot_class; T_PACKET_TA packet_ta; T_DL_POWER_CTL dl_pwr_ctl; UWORD8 tsc; T_PACKET_FREQ_PARAM freq_param; UWORD8 mac_mode; T_TBF_STI tbf_sti; T_UL_RESSOURCE_ALLOC *ul_tbf_alloc; T_DL_RESSOURCE_ALLOC dl_tbf_alloc; BOOL interf_meas_enable; UWORD8 ts_override; BOOL pc_meas_chan; } T_TRANSFER_SET; typedef struct { UWORD8 ta_update_cmd; UWORD8 assignment_id; UWORD16 radio_freq; UWORD8 activity; BOOL request_dl; T_PACKET_TA packet_ta; } T_PTCCH_PARAM; typedef struct { UWORD8 tbf_release_cmd; UWORD8 released_tbf; } T_TBF_RELEASE_PARAM; typedef struct { UWORD8 pdch_release_cmd; UWORD8 timeslot_available; UWORD8 assignment_id; } T_PDCH_RELEASE_PARAM; typedef struct { UWORD8 assignment_id; UWORD8 txpwr[8]; BOOL crc_error; WORD8 bcch_level; UWORD16 radio_freq_tbl[4]; WORD8 burst_level[4]; } T_DL_PWR_CTRL; typedef struct { UWORD8 psi_param_update_cmd; UWORD8 Scell_pb; UWORD8 access_burst_type; } T_PSI_PARAM_UPDATE; typedef struct { BOOL semaphore; T_TRANSFER_SET *aset; T_TRANSFER_SET *fset[2]; T_TRANSFER_SET set[3]; T_UL_RESSOURCE_ALLOC ul_tbf_alloc[3]; T_SINGLE_BLOCK single_block; T_PTCCH_PARAM ptcch; T_TBF_RELEASE_PARAM tbf_release_param; T_PDCH_RELEASE_PARAM pdch_release_param; T_MPHP_REPEAT_UL_FIXED_ALLOC_REQ repeat_alloc; T_PSI_PARAM_UPDATE psi_param; T_DL_PWR_CTRL dl_pwr_ctrl; } T_TRANSFER_PARAM; /***************************************************************************************/ /* L1S packet global variable structure... */ /***************************************************************************************/ typedef struct { BOOL new_set; UWORD8 assignment_id; UWORD8 allocated_tbf; UWORD8 dl_tfi; UWORD8 ul_tfi; T_DL_POWER_CTL dl_pwr_ctl; BOOL pc_meas_chan; UWORD16 radio_freq_for_lna; } T_READ_PARAM; typedef struct { UWORD8 ILmin_beacon; UWORD8 ILmin_others[8]; // No power control AGC algorithm variables UWORD32 fn_select; BOOL phase; // Downlink power control mode B variables UWORD8 last_PR_good; // TBF Parameters used during the PDTCH read phase T_READ_PARAM read_param; // Flag used to know if the pc_meas_chan measurement has been controlled BOOL pc_meas_chan_ctrl; } T_L1PS_GLOBAL; /***********************************************************/ /* L1PA global variable structure... */ /***********************************************************/ typedef struct { // State for L1A state machines... //----------------------------------------- UWORD8 state[NBR_L1PA_PROCESSES]; // Measurement tasks management... //----------------------------------------- UWORD32 l1pa_en_meas[NBR_L1PA_PROCESSES]; } T_L1PA_GLOBAL; /*************************************************************/ /* Packet Idle mode tasks information... */ /*************************************************************/ /* must be filled according to Packet Idle parameters... */ /* ... */ /*************************************************************/ // Packet Idle Parameter description typedef struct { UWORD16 radio_freq; UWORD16 radio_freq_d; UWORD16 radio_freq_dd; } T_P_IDLE_PARAM; // Packet Paging description typedef struct { // -------- Packet Paging description -------------- UWORD8 bs_pag_blks_res; // BS_PAG_BLKS_RES parameter (cf. S921 specification) UWORD8 bs_pbcch_blks; // BS_PBCCH_BLKS parameter (cf. S921 specification) T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description UWORD8 nb_ppch_per_mf52;// Number of Packet PCCH per MF52 UWORD16 first_pg_grp; // First Paging Group index UWORD16 pg_blks_avail; // Number of Paging blocks available per MF52 UWORD16 pg_offset; // (IMSI mo 1000) div (KC*N) (Note N = 1 for PCCCH) UWORD16 split_pg_value; // Min(pg_blks_avail, split_pg_cycle) //-- BOOL epg_computation; // Packet Paging STATE used in Extended Paging scheduling UWORD16 pnp_period; // Paging Period = (52*64)/split_pg_value WORD16 time_to_pnp; // Time to next PPCH block position. } T_PCCCH_PARAM; typedef struct { BOOL change_synchro; BOOL control_offset; BOOL read_all_psi; UWORD8 nbr_psi; UWORD8 bs_pbcch_blks; UWORD8 psi1_repeat_period; UWORD8 relative_position_array[20]; // Array for Relative position UWORD16 offset_array[20]; // Array of offset computed from relative position T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description UWORD8 rel_pos_to_report; // Relative Position of the PBCCH block read and to // to report to L3. UWORD16 pbcch_period; // PBCCH period = MFL52 * psi1_repaet_period; UWORD8 tn_pbcch; // Time slot number relative for DSP point of view. } T_PBCCHS_PARAM; typedef struct { BOOL change_synchro; UWORD8 pb; UWORD8 bs_pbcch_blks; UWORD8 psi1_repeat_period; UWORD8 relative_position; // for Relative position UWORD16 offset; // offset computed from relative position T_PACKET_CHANNEL_DESC packet_chn_desc; // Packet Channel Description: arfcn/Hopping description + TN + TSC T_MOBILE_ALLOCATION frequency_list; // Mobile allocation description UWORD16 pbcch_period; // PBCCH period = MFL52 * psi1_repaet_period; UWORD16 bcch_carrier; // beacon of the neighbor cell (used by the DSP) WORD32 fn_offset; WORD32 time_alignmt; } T_PBCCHN_PARAM; typedef struct { BOOL dsp_r_page_switch_req; // If true, the dsp_r_page must be toggled in the interference measurement read UWORD8 multislot_class; // Mobile multislot class UWORD8 meas_bitmap; // Timeslots on which the interference measurements are done UWORD8 position; // Position on which measurements must be done (search or ptcch frame) UWORD8 idle_tn_rx; // Timeslot bitmap in packet idle with PCCCH on the frame before UWORD8 idle_tn_no_rx; // Timeslot bitmap in packet idle without PCCCH on the frame before UWORD16 radio_freq; // Radio freq. processed by l1s_hopping_algo() T_PACKET_FREQ_PARAM packet_intm_freq_param; // Frequency parameters } T_ITMEAS_PARAM; typedef struct { UWORD32 fn; // Absolute FN reported during the last measurement session UWORD8 rxlev[8]; // Buffer used to save the parameters reported to L3 UWORD8 meas_bitmap; // Interf meas bitmap. UWORD8 id; // Id. } T_L1A_INT_MEAS_PARAM; typedef struct { UWORD8 lna; // Input level result UWORD8 il; // LNA parameter } T_IL_LNA; typedef struct { UWORD8 next_to_ctrl; // Carrier for next power measurement result. UWORD8 next_to_read; // Next carrier to measure. UWORD8 pnp_ctrl; // Specify to l1s_meas_manager() that a PPCH burst has been ctrl. UWORD8 ms_ctrl; UWORD8 ms_ctrl_d; UWORD8 ms_ctrl_dd; T_IL_LNA used_il_lna[NB_MEAS_MAX_GPRS]; T_IL_LNA used_il_lna_d[NB_MEAS_MAX_GPRS]; T_IL_LNA used_il_lna_dd[NB_MEAS_MAX_GPRS]; } T_CR_FREQ_LIST; typedef struct { UWORD8 nb_carrier; UWORD16 freq_list[32+1]; UWORD8 list_id; } T_CRES_LIST_PARAM; typedef struct { T_CRES_LIST_PARAM *alist; T_CRES_LIST_PARAM *flist; T_CRES_LIST_PARAM list[2]; } T_CRES_FREQ_LIST; typedef struct { UWORD8 tcr_next_to_ctrl; UWORD8 tcr_next_to_read; UWORD8 last_stored_tcr_to_read; UWORD8 ms_ctrl; UWORD8 ms_ctrl_d; UWORD8 ms_ctrl_dd; BOOL first_pass_flag; T_IL_LNA used_il_lna; T_IL_LNA used_il_lna_d; T_IL_LNA used_il_lna_dd; BOOL new_list_present; WORD8 beacon_meas; WORD8 fn_report; UWORD8 cres_meas_report; } T_TCR_LIST_SET; /***************************************************************************************/ /* L1A <-> L1S communication structure dedicated to packet mode */ /***************************************************************************************/ typedef struct { // Packet Idle Parameters // PCCCH parameters T_PCCCH_PARAM pccch; //-- T_P_IDLE_PARAM p_idle_param; // Packet Idle Parameters description // Packet Access Parameters T_PRACH_INFO pra_info; // Packet Access Parameters T_POLL_INFO poll_info; // Packet Transfer Parameters T_TRANSFER_PARAM transfer; // Serving Cell PBCCH parameters T_PBCCHS_PARAM pbcchs; // Neigbour Cell PBCCH parameters T_PBCCHN_PARAM pbcchn; // Interference measurement parameters T_ITMEAS_PARAM itmeas; // Measurement tasks management... //----------------------------------------- UWORD32 meas_param; // Synchro semaphore bit register for packet measurement tasks. UWORD32 l1ps_en_meas; // Enable packet Meas task bit register. // Access burst type //------------------ UWORD8 access_burst_type; // Frequency list Parameters used in Cell Reselection measurements // --------------------------------------------------------------- T_CR_FREQ_LIST cr_freq_list; // Parameters used in Packet Transfer Neighbour measurement task // ------------------------------------------------------------- T_TCR_LIST_SET tcr_freq_list; // Cell Reselection list, used both in Packet Idle and Packet Transfer // ------------------------------------------------------------------- T_CRES_FREQ_LIST cres_freq_list; } T_L1PA_L1PS_COM; /***************************************************************************************/ /* API (MCU <-> DSP) communication structures */ /***************************************************************************************/ typedef struct { // GPRS Extension............... API d_task_d_gprs; // (map?) Task, burst per burst (part of header) API d_task_u_gprs; // (map?) Task, burst per burst (part of header) API d_task_pm_gprs; // (map?) Task, burst per burst (part of header) API d_burst_nb_gprs; // (map?) burst identifier. (part of header) API a_ctrl_abb_gprs[8]; // (map?) Analog baseband control, burst per burst. API a_ctrl_power_gprs[8]; // (map?) Power control value, burst per burst. } T_DB_MCU_TO_DSP_GPRS; typedef struct { // GPRS Extension............... API d_task_d_gprs; // (map?) Task, burst per burst (part of header) API d_task_u_gprs; // (map?) Task, burst per burst (part of header) API d_task_pm_gprs; // (map?) Task, burst per burst (part of header) API d_burst_nb_gprs; // (map?) burst identifier. (part of header) API a_burst_toa_gprs[8]; // (map?) Time of arrival, burst per burst API a_burst_pm_gprs[8]; // (map?) Receive Power Level, burst per burst API a_burst_angle_gprs[8];// (map?) Angle deviation, burst per burst API a_burst_snr_gprs[8]; // (map?) Signal to noise ratio, burst per burst } T_DB_DSP_TO_MCU_GPRS; #if (DSP == 34) || (DSP == 35) || (DSP == 36) typedef struct { // GEA module API d_gea_mode; API a_gea_kc[4]; API d_hole1_ndb_gprs[8]; API d_a5mode_ovly; API d_sched_mode_gprs; API d_hole2_ndb_gprs[5]; API d_usf_updated_gprs; API d_win_start_gprs; API d_usf_vote_enable; API d_bbctrl_gprs; API d_hole3_ndb_gprs[2]; // (map?) BTS physical timeslot mapping. API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) API a_usf_gprs[8]; API a_interf_meas_gprs[8]; API a_ptcchu_gprs[4]; API a_dd_md_gprs[16]; API a_du_gprs[4][29]; API a_pu_gprs[4][15]; API d_rlcmac_rx_no_gprs; API a_dd_gprs[8][31]; API a_ramp_gprs[8][16]; } T_NDB_MCU_DSP_GPRS; #elif (DSP == 33) typedef struct { // GEA module API d_gea_mode; API a_gea_kc[4]; API d_hole1_ndb_gprs[8]; API d_a5mode_ovly; API d_sched_mode_gprs; API d_hole2_ndb_gprs[5]; API d_usf_updated_gprs; API d_win_start_gprs; API d_usf_vote_enable; API d_bbctrl_gprs; API d_hole3_ndb_gprs[2]; // (map?) BTS physical timeslot mapping. API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) API a_usf_gprs[8]; API a_interf_meas_gprs[8]; API a_ptcchu_gprs[4]; API a_dd_md_gprs[16]; API a_du_gprs[4][29]; API a_pu_gprs[4][15]; API d_rlcmac_rx_no_gprs; API a_dd_gprs[8][31]; API a_ramp_gprs[8][16]; } T_NDB_MCU_DSP_GPRS; #else typedef struct { // GPRS Extension............... API a_ramp_gprs[8][16]; #if (CODE_VERSION != SIMULATION) API a_hole1_gprs[22]; // hole for a_du_1 and d_a5_mode #endif API d_ptcchu_ctrl_abb_gprs; API d_ptcchu_ctrl_power_gprs; API d_ptcchd_burst_nb_gprs; #if (CODE_VERSION != SIMULATION) API a_hole2_gprs[184]; #endif API d_usf_updated_gprs; API d_win_start_gprs; // (map?) BTS physical timeslot mapping. API a_ctrl_ched_gprs[8]; // (map?) Ched configuration, burst per burst API a_ul_buffer_gprs[8]; // (map?) UL burst / UL buffer mapping, burst per burst. (part of header) API a_usf_gprs[8]; API a_interf_meas_gprs[8]; API d_background_enable; API d_background_abort; API d_background_state; API d_max_background; API a_background_tasks[16]; API a_back_task_io[10]; #if (CODE_VERSION != SIMULATION) API a_hole3_gprs[19]; #endif API d_gea_mode; API a_gea_kc[4]; API d_sched_mode_gprs; #if (CODE_VERSION != SIMULATION) API a_hole4_gprs[384]; #endif API a_du_gprs[4][29]; API d_rlcmac_rx_no_gprs; API a_dd_gprs[4][31]; API a_pu_gprs[4][15]; #if (CODE_VERSION != SIMULATION) API a_hole5_gprs[112]; #endif API a_ptcchu_gprs[4]; API a_dd_md_gprs[16]; } T_NDB_MCU_DSP_GPRS; #endif #if (DSP == 34) || (DSP == 35) || (DSP == 36) typedef struct { // GPRS Extension............... API_SIGNED d_overlay_rlcmac_cfg_gprs; API_SIGNED d_mac_threshold; API_SIGNED d_sd_threshold; API_SIGNED d_nb_max_iteration; } T_PARAM_MCU_DSP_GPRS; #elif (DSP == 33) typedef struct { // GPRS Extension............... API_SIGNED d_overlay_rlcmac_cfg_gprs; API_SIGNED d_mac_threshold; API_SIGNED d_sd_threshold; API_SIGNED d_nb_max_iteration; } T_PARAM_MCU_DSP_GPRS; #else typedef struct { // GPRS Extension............... API_SIGNED d_overlay_rlcmac_cfg_gprs; API_SIGNED d_lat_mcu_bridge; API_SIGNED d_lat_pll2div; API_SIGNED d_lat_mcu_hom2sam; API_SIGNED d_gprs_install_address; API_SIGNED d_mac_threshold; API_SIGNED d_sd_threshold; API_SIGNED d_nb_max_iteration; } T_PARAM_MCU_DSP_GPRS; #endif /***************************************************************************************/ /* L1PS -> DSP communication structure... */ /***************************************************************************************/ typedef struct { T_DB_DSP_TO_MCU_GPRS *pdsp_db_r_ptr; // MCU<->DSP comm. read page (Double Buffered comm. memory). T_DB_MCU_TO_DSP_GPRS *pdsp_db_w_ptr; // MCU<->DSP comm. write page (Double Buffered comm. memory). T_NDB_MCU_DSP_GPRS *pdsp_ndb_ptr; // MCU<->DSP comm. read/write (Non Double Buffered comm. memory). T_PARAM_MCU_DSP_GPRS *pdsp_param_ptr; // MCU<->DSP comm. read/write (Param comm. memory). } T_L1PS_DSP_COM; /***************************************************************************************/ /* L1PS -> MAC-S communication structure... */ /***************************************************************************************/ typedef struct { UWORD8 nb; // Number of error found UWORD8 id[10]; // Error ID } T_MACS_STATUS; typedef struct { BOOL new_set; // Set to 1 if allocation parameters have changed, reset by MAC-S UWORD8 rx_allocation; // Downlink resources relative to Layer 1 frames UWORD8 tx_nb_allocation; // Uplink resources used to transmit normal bursts relative to Layer 1 frames UWORD8 tx_prach_allocation; // Uplink resources used to transmit PRACH bursts relative to Layer 1 frames UWORD8 pwr_allocation; // Measurement gap relative to Layer 1 frames BOOL fix_alloc_exhaust_flag; // Set to 1 if the fixed allocation has just exhausted BOOL rlc_downlink_call; T_MACS_STATUS macs_status; } T_L1PS_MACS_COM;