view cdg-hybrid/cdginc/m_mm.val @ 263:b5e8dfd114a7

Switch_ON(): go into charging boot mode on either CHGSTS or CHGPRES If someone were to plug and then unplug a charger into a switched-off phone in an extremely brief "glitch" manner, we should do an automatic power-off on boot in this condition. When we were checking only CHGPRES in Switch_ON(), we would go into Misc boot state instead, which is undesirable. Now if we have a CHGSTS but not CHGPRES condition, we will go into charging boot mode, and FCBM will then do the automatic power-off upon detecting absence of the charger in its periodic polling.
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 14 May 2021 05:50:36 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : m_mm.val                                                       |
| SOURCE  : "msg\mm.mdf"                                                   |
| LastModified : "2006-03-22"                                              |
| IdAndVersion : "6147.602.06.106"                                         |
| SrcFileTime  : "Wed Nov 28 10:19:30 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef M_MM_VAL
#define M_MM_VAL


#define CDG_ENTER__M_MM_VAL

#define CDG_ENTER__FILENAME _M_MM_VAL
#define CDG_ENTER__M_MM_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__M_MM_VAL__LAST_MODIFIED _2006_03_22
#define CDG_ENTER__M_MM_VAL__ID_AND_VERSION _6147_602_06_106

#define CDG_ENTER__M_MM_VAL__SRC_FILE_TIME _Wed_Nov_28_10_19_30_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__M_MM_VAL

#undef CDG_ENTER__FILENAME

#include "m_rr_com.val"   /* Access values independent from the corresponding h-file. */


/*
 * Value constants for VAL_cm_serv_type
 */
#define VAL_CM_SERV_TYPE___DEF         (0x0)      /* reserved                       */
#define ST_MOC                         (0x1)      /* Mobile originating call establishment or packet mode connection establishment */
#define ST_EMERGENCY                   (0x2)      /* Emergency call establishment   */
#define ST_SMS                         (0x4)      /* Short message service          */
#define ST_SS                          (0x8)      /* Supplementary service activation */

/*
 * Value constants for VAL_follow
 */
#define FOR_PENDING_NO                 (0x0)      /* No follow-on request pending   */
#define FOR_PENDING_YES                (0x1)      /* Follow-on request pending      */

/*
 * Value constants for VAL_key_seq
 */
#define VAL_KEY_SEQ___7                (0x7)      /* No key is available (MS to network); Reserved (network to MS) */

/*
 * Value constants for VAL_odd_even
 */
#define EVEN                           (0x0)      /* even                           */
#define ODD                            (0x1)      /* odd                            */

/*
 * Value constants for VAL_rej_cause
 */
#define VAL_REJ_CAUSE___DEF            (0x0)      /* DOWNLINK : Service option temporarily out of order UPLINK : Protocol error, unspecified */
#define RC_IMSI_IN_HLR                 (0x2)      /* IMSI unknown in HLR            */
#define RC_ILLEGAL_MS                  (0x3)      /* Illegal MS                     */
#define RC_IMSI_IN_VLR                 (0x4)      /* IMSI unknown in VLR            */
#define RC_IMEI_NOT_ACCEPTED           (0x5)      /* IMEI not accepted              */
#define RC_ILLEGAL_ME                  (0x6)      /* Illegal ME                     */
#define RC_PLMN_NOT_ALLOWED            (0xb)      /* PLMN not allowed               */
#define RC_LA_NOT_ALLOWED              (0xc)      /* Location Area not allowed      */
#define RC_ROAMING_NOT_ALLOWED         (0xd)      /* National roaming not allowed in this location area */
// VAL-FF: REL99  
// #define RC_NO_SUITABLE_CELL_IN_LA      (0xf)   /* Find another allowed location area in the same PLMN */
#define RC_NETWORK_FAILURE             (0x11)     /* Network failure                */
#define RC_CONGETION                   (0x16)     /* Congestion                     */
#define RC_SERVICE_NOT_SUPPORTED       (0x20)     /* Service option not supported   */
#define RC_SERVICE_NOT_SUBSCRIBED      (0x21)     /* Requested service option not subscribed */
#define RC_SERVICE_ORDER               (0x22)     /* Service option temporarily out of order */
#define RC_IDENTIFIY                   (0x26)     /* Call cannot be identified      */
#define RC_INCORRECT_MESSAGE           (0x5f)     /* Semantically incorrect message */
#define RC_INVALID_MAND_MESSAGE        (0x60)     /* Invalid mandatory information  */
#define RC_MESSAGE_TYPE_NOT_IMPLEM     (0x61)     /* Message type non-existent or not implemented */
#define RC_MESSAGE_TYPE_INCOMPAT       (0x62)     /* Message type not compatible with the protocol state */
#define RC_IE_NOT_IMPLEM               (0x63)     /* Information element non-existent or not implemented */
#define RC_CONDITIONAL_IE              (0x64)     /* Conditional IE error           */
#define RC_MESSAGE_INCOMPAT            (0x65)     /* Message not compatible with the protocol state */
#define RC_UNSPECIFIED                 (0x6f)     /* Protocol error, unspecified    */

/*
 * Value constants for VAL_ident_type
 */
#define VAL_IDENT_TYPE___DEF           (0x0)      /* reserved                       */
#define ID_TYPE_NO_IDENT               (0x0)      /* No Identity                    */
#define ID_TYPE_IMSI                   (0x1)      /* IMSI                           */
#define ID_TYPE_IMEI                   (0x2)      /* IMEI                           */
#define ID_TYPE_IMEISV                 (0x3)      /* IMEISV                         */
#define ID_TYPE_TMSI                   (0x4)      /* TMSI                           */

/*
 * Value constants for VAL_sapi
 */
#define SAPI_0                         (0x0)      /* SAPI used for RR, MM, CC and SS */
#define SAPI_3                         (0x3)      /* SAPI used for SMS              */

/*
 * Value constants for VAL_pd
 */
#define PD_GCC                         (0x0)      /* Group call control             */
#define PD_BCC                         (0x1)      /* Broadcast Call Control         */
#define PD_PDSS1                       (0x2)      /* PDSS1                          */
#define PD_CC                          (0x3)      /* Call Control, call related SS messages */
#define PD_PDSS2                       (0x4)      /* PDSS2                          */
#define PD_MM                          (0x5)      /* Mobility Management messages   */
#define PD_RR                          (0x6)      /* Radio Resources management messages */
#define PD_GPRS_MM                     (0x8)      /* GPRS Mobility Management messages */
#define PD_SMS                         (0x9)      /* SMS messages                   */
#define PD_GPRS_SM                     (0xa)      /* GPRS Session Management messages */
#define PD_SS                          (0xb)      /* non call related SS messages   */
#define PD_LS                          (0xc)      /* Location services              */
#define PD_TST                         (0xf)      /* Reserved for test procedures described in GSM 11.10 */

/*
 * Value constants for VAL_cs
 */
#define CODING_SCHEME_SMSCB            (0x0)      /* Coding scheme cell broadcast short messages */
#define CODING_SCHEME_UCS2             (0x1)      /* Coding scheme UCS2, 16 bit, ISO ISO/IEC10646 */

/*
 * Value constants for VAL_add_ci
 */
#define ADD_CI_NO                      (0x0)      /* Country's Initials are not to be added */
#define ADD_CI_YES                     (0x1)      /* Country's Initials are to be added */

/*
 * Value constants for VAL_save_time_value
 */
#define TIME_ADJ_NO                    (0x0)      /* No adjustment for Daylight Saving Time */
#define TIME_ADJ_1                     (0x1)      /* +1 hour adjustment for Daylight Saving Time */
#define TIME_ADJ_2                     (0x2)      /* +2 hours adjustment for Daylight Saving Time */

/*
 * user defined constants
 */
#define L3MAX                          (0xfb)     
#define MAXNAME                        (0x28)     

#include "CDG_LEAVE.h"


#endif