FreeCalypso > hg > fc-tourmaline
view src/cs/services/audio/audio_mode_drivers.c @ 263:b5e8dfd114a7
Switch_ON(): go into charging boot mode on either CHGSTS or CHGPRES
If someone were to plug and then unplug a charger into a switched-off
phone in an extremely brief "glitch" manner, we should do an automatic
power-off on boot in this condition. When we were checking only
CHGPRES in Switch_ON(), we would go into Misc boot state instead,
which is undesirable. Now if we have a CHGSTS but not CHGPRES
condition, we will go into charging boot mode, and FCBM will then
do the automatic power-off upon detecting absence of the charger
in its periodic polling.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 14 May 2021 05:50:36 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: audio_mode_drivers.c */ /* */ /* Purpose: This file contains all the drivers used for audio mode */ /* services. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------------------------------------------*/ /* 14 Jan 2002 Create */ /* */ /* Author Francois Mazard */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_AUDIO_MAIN_SWE #ifndef _WINDOWS #include "config/swconfig.cfg" #include "config/sys.cfg" #include "config/l1sw.cfg" #include "config/chipset.cfg" #endif #include "l1_confg.h" #include "rv/rv_general.h" #include "rvm/rvm_gen.h" #include "audio/audio_features_i.h" #include "audio/audio_ffs_i.h" #include "audio/audio_api.h" #include "audio/audio_structs_i.h" #include "audio/audio_error_hdlr_i.h" #include "audio/audio_var_i.h" #include "audio/audio_messages_i.h" #include "audio/audio_macro_i.h" #include "rvf/rvf_target.h" #include "audio/audio_const_i.h" #include "audio/audio_mode_i.h" /* include the usefull L1 header */ #ifdef _WINDOWS #define BOOL_FLAG //#define CHAR_FLAG #endif #include "l1_types.h" #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #include "l1audio_msgty.h" #include "l1audio_signa.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #include "l1_const.h" #include "l1_defty.h" #include "l1_msgty.h" #include "l1_signa.h" #ifdef _WINDOWS #define L1_ASYNC_C #endif #include "l1_varex.h" /* write drivers */ T_AUDIO_RET audio_mode_voice_path_write (T_AUDIO_VOICE_PATH_SETTING *data, UINT8 *message_to_confirm); T_AUDIO_RET audio_mode_microphone_mode_write (INT8 *data); T_AUDIO_RET audio_mode_microphone_gain_write (INT8 *data); T_AUDIO_RET audio_mode_microphone_extra_gain_write (INT8 *data); T_AUDIO_RET audio_mode_microphone_output_bias_write (INT8 *data); T_AUDIO_RET audio_mode_speaker_mode_write (INT8 *data); T_AUDIO_RET audio_mode_speaker_gain_write (INT8 *data); T_AUDIO_RET audio_mode_speaker_filter_write (INT8 *data); T_AUDIO_RET audio_mode_speaker_buzzer_write (INT8 *data); T_AUDIO_RET audio_mode_sidetone_gain_write (INT8 *data); T_AUDIO_RET audio_mode_aec_write (T_AUDIO_AEC_CFG *data); T_AUDIO_RET audio_mode_speaker_volume_write (T_AUDIO_SPEAKER_LEVEL *data); T_AUDIO_RET audio_mode_speaker_microphone_fir_write (T_AUDIO_FIR_COEF *data_speaker, T_AUDIO_FIR_COEF *data_microphone); /* read drivers */ T_AUDIO_RET audio_mode_voice_path_read (T_AUDIO_VOICE_PATH_SETTING *data); T_AUDIO_RET audio_mode_microphone_mode_read (INT8 *data); T_AUDIO_RET audio_mode_microphone_gain_read (INT8 *data); T_AUDIO_RET audio_mode_microphone_extra_gain_read (INT8 *data); T_AUDIO_RET audio_mode_microphone_output_bias_read (INT8 *data); T_AUDIO_RET audio_mode_microphone_fir_read (T_AUDIO_FIR_COEF *data); T_AUDIO_RET audio_mode_speaker_mode_read (INT8 *data); T_AUDIO_RET audio_mode_speaker_gain_read (INT8 *data); T_AUDIO_RET audio_mode_speaker_filter_read (INT8 *data); T_AUDIO_RET audio_mode_speaker_fir_read (T_AUDIO_FIR_COEF *data); T_AUDIO_RET audio_mode_speaker_buzzer_read (INT8 *data); T_AUDIO_RET audio_mode_sidetone_gain_read (INT8 *data); T_AUDIO_RET audio_mode_aec_read (T_AUDIO_AEC_CFG *data); T_AUDIO_RET audio_mode_speaker_volume_read (T_AUDIO_SPEAKER_LEVEL *data); /* external functions */ extern void ABB_CAL_UlVolume (UWORD8 pga_index); extern void ABB_CAL_DlVolume (UWORD8 volume_index, UWORD8 pga_index); extern void ABB_UlVolume (UWORD8 volume_index); extern void ABB_DlVolume (UWORD8 volume_index); extern void ABB_DlMute (UWORD8 mute); extern void ABB_SideTone (UWORD8 volume_index); extern void ABB_Audio_Config (UWORD16 data); extern void ABB_Audio_Config_2 (UWORD16 data); extern void ABB_UlMute (BOOL mute); /* external variable */ /* Uplink PGA gain is coded on 5 bits, corresponding to -12 dB to +12 dB in 1dB steps */ extern const UWORD8 ABB_uplink_PGA_gain[]; /* Downlink volume: mute, -24dB to 0dB in 6dB steps */ extern const UWORD8 ABB_volume_control_gain[]; /* Downlink PGA gain is coded on 4 bits, corresponding to -6dB to 6dB in 1dB steps */ extern const UWORD8 ABB_downlink_PGA_gain[]; /* Side tone level: mute, -23dB to +4dB in 3dB steps */ extern const UWORD8 ABB_sidetone_gain[]; /********************************************************************************/ /********************** WRITE DRIVERS ******************************/ /********************************************************************************/ /********************************************************************************/ /* */ /* Function Name: audio_mode_voice_path_write */ /* */ /* Purpose: This function set a new voice path. */ /* */ /* Input Parameters: */ /* new voice path. */ /* */ /* Output Parameters: */ /* Status. */ /* number of message to confirm */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_voice_path_write (T_AUDIO_VOICE_PATH_SETTING *data, UINT8 *message_to_confirm) { void *p_send_message = NULL; T_AUDIO_VOICE_PATH_SETTING previous_audio_mode_path; *message_to_confirm = 0; /* Read if the current mode is a DAI mode */ if (audio_mode_voice_path_read(&previous_audio_mode_path) == AUDIO_ERROR) { AUDIO_SEND_TRACE("AUDIO MODE WRITE: voice path: error to read the current audio mode path", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } switch (*data) { case AUDIO_GSM_VOICE_PATH: { if ( (previous_audio_mode_path == AUDIO_DAI_ENCODER) || (previous_audio_mode_path == AUDIO_DAI_DECODER) || (previous_audio_mode_path == AUDIO_DAI_ACOUSTIC) ) { /* The current mode is a DAI test so it need to be stopped */ /* Send the stop DAI message to the L1*/ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(0); if (p_send_message != NULL) { /* send the start command to the audio L1 */ audio_send_l1_message(OML1_STOP_DAI_TEST_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: voice path: the stop DAI message isn't send", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } /* confirm the DAI stop message */ *message_to_confirm += 1; } #if (AUDIO_MODE) /* Send the Audio path configuration message */ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(sizeof(T_MMI_AUDIO_MODE)); if (p_send_message != NULL) { /* Fill the parameter */ ((T_MMI_AUDIO_MODE *)p_send_message)->audio_mode = *data; /* send the start command to the audio L1 */ audio_send_l1_message(MMI_AUDIO_MODE_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: voice path: the audio mode message isn't send", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } /* confirm the AUDIO MODE message */ *message_to_confirm += 1; #endif break; } #if (AUDIO_MODE) case AUDIO_BLUETOOTH_CORDLESS_VOICE_PATH: case AUDIO_BLUETOOTH_HEADSET: { if ( (previous_audio_mode_path == AUDIO_DAI_ENCODER) || (previous_audio_mode_path == AUDIO_DAI_DECODER) || (previous_audio_mode_path == AUDIO_DAI_ACOUSTIC) ) { /* The current mode is a DAI test so it need to be stopped */ /* Send the stop DAI message to the L1*/ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(0); if (p_send_message != NULL) { /* send the start command to the audio L1 */ audio_send_l1_message(OML1_STOP_DAI_TEST_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: voice path: the stop DAI message isn't send", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } /* confirm the DAI stop message */ *message_to_confirm += 1; } /* Send the Audio path configuration message */ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(sizeof(T_MMI_AUDIO_MODE)); if (p_send_message != NULL) { /* Fill the parameter */ ((T_MMI_AUDIO_MODE *)p_send_message)->audio_mode = *data; /* send the start command to the audio L1 */ audio_send_l1_message(MMI_AUDIO_MODE_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: voice path: the audio mode message isn't send", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } /* confirm the AUDIO MODE message */ *message_to_confirm += 1; break; } #endif case AUDIO_DAI_ENCODER : case AUDIO_DAI_DECODER : case AUDIO_DAI_ACOUSTIC : { /* Send the DAI start message */ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(sizeof(T_OML1_START_DAI_TEST_REQ)); if (p_send_message != NULL) { /* Fill the parameter */ ((T_OML1_START_DAI_TEST_REQ *)p_send_message)->tested_device = (UINT8)(*data - 10); /* send the start command to the audio L1 */ audio_send_l1_message(OML1_START_DAI_TEST_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: voice path: the start DAI message isn't send", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } /* confirm the DAI start message */ *message_to_confirm += 1; break; } default : { AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: voice path: this mode isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_mode_write */ /* */ /* Purpose: This function set a new microphone mode. */ /* */ /* Input Parameters: */ /* new microphone mode. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_mode_write (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 2) UINT16 vbcr2; #endif #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); vbcr2 = (l1s_dsp_com.dsp_ndb_ptr->d_vbctrl2 >> 6); #endif switch (*data) { case AUDIO_MICROPHONE_HANDHELD: { #if (ANLG_FAM == 2) /* Reset the Head set configuration */ vbcr2 &= (~(AUDIO_VBCR2_MICBIASEL | AUDIO_VBCR2_MICNAUX)); ABB_Audio_Config_2(vbcr2); #endif vbcr |= AUDIO_VBCR_VULSWITCH; ABB_Audio_Config(vbcr); break; } case AUDIO_MICROPHONE_HEADSET: { #if (ANLG_FAM == 2) /* Set the auxilary input */ vbcr &= ~(AUDIO_VBCR_VULSWITCH); ABB_Audio_Config(vbcr); vbcr2 |= (AUDIO_VBCR2_MICBIASEL | AUDIO_VBCR2_MICNAUX); ABB_Audio_Config_2(vbcr2); #else AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: microphone mode: this mode isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif break; } case AUDIO_MICROPHONE_HANDFREE: { #if (ANLG_FAM == 2) /* Reset the Head set configuration */ vbcr2 &= (~(AUDIO_VBCR2_MICBIASEL | AUDIO_VBCR2_MICNAUX)); ABB_Audio_Config_2(vbcr2); #endif vbcr &= ~(AUDIO_VBCR_VULSWITCH); ABB_Audio_Config(vbcr); break; } default : { AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: microphone mode: this mode isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_gain_write */ /* */ /* Purpose: This function set a new microphone gain. */ /* */ /* Input Parameters: */ /* new microphone gain. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_gain_write (INT8 *data) { if (*data == AUDIO_MICROPHONE_MUTE) { ABB_UlMute(TRUE); } else { /* Unmute the micropohne */ ABB_UlMute(FALSE); ABB_CAL_UlVolume( (UINT8)(*data + 12) ); } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_extra_gain_write */ /* */ /* Purpose: This function set a new microphone extra gain. */ /* */ /* Input Parameters: */ /* new microphone extra gain. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_extra_gain_write (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); #endif switch (*data) { case AUDIO_MICROPHONE_AUX_GAIN_28_2dB: { vbcr |= (AUDIO_VBCR_VBDFAUXG); ABB_Audio_Config(vbcr); break; } case AUDIO_MICROPHONE_AUX_GAIN_4_6dB: { vbcr &= ~(AUDIO_VBCR_VBDFAUXG); ABB_Audio_Config(vbcr); break; } default : { AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: microphone extra gain: this extra gain isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_output_bias_write */ /* */ /* Purpose: This function set a new microphone output bias. */ /* */ /* Input Parameters: */ /* new microphone output bias. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_output_bias_write (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); #endif switch (*data) { case AUDIO_MICROPHONE_OUTPUT_BIAS_2_5V: { vbcr |= (AUDIO_VBCR_MICBIAS); ABB_Audio_Config(vbcr); break; } case AUDIO_MICROPHONE_OUTPUT_BIAS_2_0V: { vbcr &= ~(AUDIO_VBCR_MICBIAS); ABB_Audio_Config(vbcr); break; } default : { AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: microphone output bias: this output bias isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_mode_write */ /* */ /* Purpose: This function set a new speaker mode. */ /* */ /* Input Parameters: */ /* new speaker mode. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_mode_write (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 2) UINT16 vbcr2; #endif #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); vbcr2 = (l1s_dsp_com.dsp_ndb_ptr->d_vbctrl2 >> 6); #endif switch (*data) { case AUDIO_SPEAKER_HANDHELD: { #if (ANLG_FAM == 2) /* Reset the Head set configuration */ vbcr2 &= (~(AUDIO_VBCR2_VDLHSO)); ABB_Audio_Config_2(vbcr2); #endif #if (ANLG_FAM != 3) vbcr |= (AUDIO_VBCR_VDLEAR); vbcr &= ~(AUDIO_VBCR_VDLAUX); ABB_Audio_Config(vbcr); #endif break; } case AUDIO_SPEAKER_HANDFREE: { #if (ANLG_FAM == 2) /* Reset the Head set configuration */ vbcr2 &= (~(AUDIO_VBCR2_VDLHSO)); ABB_Audio_Config_2(vbcr2); #endif #if (ANLG_FAM != 3) vbcr |= (AUDIO_VBCR_VDLAUX); vbcr &= ~(AUDIO_VBCR_VDLEAR); ABB_Audio_Config(vbcr); #endif break; } case AUDIO_SPEAKER_HEADSET: { #if (ANLG_FAM == 2) /* Reset aux output amplifier and the ear amplifier */ vbcr &= ~(AUDIO_VBCR_VDLEAR | AUDIO_VBCR_VDLAUX); ABB_Audio_Config(vbcr); vbcr2 |= (AUDIO_VBCR2_VDLHSO); ABB_Audio_Config_2(vbcr2); #else AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: speaker mode: this mode isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif break; } case AUDIO_SPEAKER_BUZZER: { #if (ANLG_FAM == 2) /* Reset the Head set configuration */ vbcr2 &= (~(AUDIO_VBCR2_VDLHSO)); ABB_Audio_Config_2(vbcr2); #endif /* Reset aux output amplifier and the ear amplifier */ #if (ANLG_FAM != 3) vbcr &= ~(AUDIO_VBCR_VDLEAR | AUDIO_VBCR_VDLAUX); ABB_Audio_Config(vbcr); #endif break; } case AUDIO_SPEAKER_HANDHELD_HANDFREE: { #if (ANLG_FAM == 2) /* Reset the Head set configuration */ vbcr2 &= (~(AUDIO_VBCR2_VDLHSO)); ABB_Audio_Config_2(vbcr2); #endif #if (ANLG_FAM != 3) vbcr |= (AUDIO_VBCR_VDLAUX | AUDIO_VBCR_VDLEAR); ABB_Audio_Config(vbcr); #endif break; } default: { AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: speaker mode: this mode isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_gain_write */ /* */ /* Purpose: This function set a new speaker gain. */ /* */ /* Input Parameters: */ /* new speaker gain. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_gain_write (INT8 *data) { T_AUDIO_SPEAKER_LEVEL volume; audio_mode_speaker_volume_read (&volume); ABB_CAL_DlVolume (volume.audio_speaker_level, (UINT8)(*data + 6)); return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_filter_write */ /* */ /* Purpose: This function enable/disable the DL filter. */ /* */ /* Input Parameters: */ /* new DL filter state. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_filter_write (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); #endif switch (*data) { case AUDIO_SPEAKER_FILTER_ON: { vbcr &= ~(AUDIO_VBCR_VFBYP); ABB_Audio_Config(vbcr); break; } case AUDIO_SPEAKER_FILTER_OFF: { vbcr |= (AUDIO_VBCR_VFBYP); ABB_Audio_Config(vbcr); break; } default : { AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: speaker filter: this state isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_buzzer_write */ /* */ /* Purpose: This function enable/disable the buzzer. */ /* */ /* Input Parameters: */ /* new buzzer state. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_buzzer_write (INT8 *data) { #if (ANLG_FAM== 1) UINT16 vbcr; vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); switch (*data) { case AUDIO_SPEAKER_BUZZER_OFF: { /* Reset aux output amplifier and the ear amplifier */ vbcr &= ~(AUDIO_VBCR_VDLEAR | AUDIO_VBCR_VDLAUX); vbcr &= ~(AUDIO_VBCR_VBUZ); ABB_Audio_Config(vbcr); break; } case AUDIO_SPEAKER_BUZZER_ON: { /* Reset aux output amplifier and the ear amplifier */ vbcr &= ~(AUDIO_VBCR_VDLEAR | AUDIO_VBCR_VDLAUX); vbcr |= (AUDIO_VBCR_VBUZ); ABB_Audio_Config(vbcr); break; } default : { AUDIO_SEND_TRACE_PARAM("AUDIO MODE WRITE: buzzer: this state isn't supported", *data, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } return (AUDIO_OK); #endif #if (ANLG_FAM == 2) AUDIO_SEND_TRACE("AUDIO MODE WRITE: buzzer: this feature isn't supported by the current analog base band", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif } /********************************************************************************/ /* */ /* Function Name: audio_mode_sidetone_gain_write */ /* */ /* Purpose: This function set the sidetone gain. */ /* */ /* Input Parameters: */ /* new sidetone gain. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_sidetone_gain_write (INT8 *data) { UINT8 sidetone_index; sidetone_index = (UINT8)(25*((*data + 26)/3)); ABB_SideTone (sidetone_index); return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_aec_write */ /* */ /* Purpose: This function set the AEC. */ /* */ /* Input Parameters: */ /* new AEC setting. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_aec_write (T_AUDIO_AEC_CFG *data) { #if (L1_NEW_AEC) void *p_send_message = NULL; /* Send the FIR configuration message */ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(sizeof(T_MMI_AEC_REQ)); if (p_send_message != NULL) { /* Fill the parameter */ ((T_MMI_AEC_REQ *)p_send_message)->aec_control = (UINT16)( (data->aec_enable | 0x0080) | (data->noise_suppression_enable | 0x0100) | (data->noise_suppression_level) | (data->aec_visibility) ); ((T_MMI_AEC_REQ *)p_send_message)->cont_filter = data->continuous_filtering; ((T_MMI_AEC_REQ *)p_send_message)->granularity_att = data->granularity_attenuation; ((T_MMI_AEC_REQ *)p_send_message)->coef_smooth = data->smoothing_coefficient; ((T_MMI_AEC_REQ *)p_send_message)->es_level_max = data->max_echo_suppression_level; ((T_MMI_AEC_REQ *)p_send_message)->fact_vad = data->vad_factor; ((T_MMI_AEC_REQ *)p_send_message)->thrs_abs = data->absolute_threshold; ((T_MMI_AEC_REQ *)p_send_message)->fact_asd_fil = data->factor_asd_filtering; ((T_MMI_AEC_REQ *)p_send_message)->fact_asd_mut = data->factor_asd_muting; /* send the start command to the audio L1 */ audio_send_l1_message(MMI_AEC_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: AEC: the audio AEC message isn't sent", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } #elif (AEC) void *p_send_message = NULL; /* Send the FIR configuration message */ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(sizeof(T_MMI_AEC_REQ)); if (p_send_message != NULL) { /* Fill the parameter */ ((T_MMI_AEC_REQ *)p_send_message)->aec_control = (UINT16)( (data->aec_enable | 0x0080) | (data->aec_mode) | (data->echo_suppression_level) | (data->noise_suppression_enable | 0x0100) | (data->noise_suppression_level) ); /* send the start command to the audio L1 */ audio_send_l1_message(MMI_AEC_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: AEC: the audio AEC message isn't sent", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } #else AUDIO_SEND_TRACE("AUDIO MODE WRITE: AEC: feature not supported", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_volume_write */ /* */ /* Purpose: This function set the speaker volume. */ /* */ /* Input Parameters: */ /* new speaker volume. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_volume_write (T_AUDIO_SPEAKER_LEVEL *data) { ABB_DlVolume (data->audio_speaker_level); return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_microphone_fir_write */ /* */ /* Purpose: This function set the speaker and microphone FIR. */ /* */ /* Input Parameters: */ /* new speaker or/and microphone FIR. */ /* Note: if one of this two pointer equals NULL, it means corresponding */ /* FIR doesn't need to be updated. */ /* */ /* Output Parameters: */ /* Status. */ /* */ /* Note: */ /* The data buffer must be deallocate only when the FIR confirmation is */ /* received. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_microphone_fir_write (T_AUDIO_FIR_COEF *data_speaker, T_AUDIO_FIR_COEF *data_microphone) { #if (FIR) void *p_send_message = NULL; if ( (data_speaker == NULL) && (data_microphone == NULL) ) { AUDIO_SEND_TRACE("AUDIO MODE WRITE: FIR: wrong arguments", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } /* Send the FIR configuration message */ /* allocate the buffer for the message to the L1 */ p_send_message = audio_allocate_l1_message(sizeof(T_MMI_AUDIO_FIR_REQ)); if (p_send_message != NULL) { if (data_speaker == NULL) { /* Fill the parameter */ ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->update_fir = UL_FIR; ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_loop = FALSE; ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_dl_coefficient = NULL; ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_ul_coefficient = &(data_microphone->coefficient[0]); } else if (data_microphone == NULL) { /* Fill the parameter */ ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->update_fir = DL_FIR; ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_loop = FALSE; ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_dl_coefficient = &(data_speaker->coefficient[0]); ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_ul_coefficient = NULL; } else { /* Fill the parameter */ ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->update_fir = UL_DL_FIR; ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_loop = FALSE; ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_dl_coefficient = &(data_speaker->coefficient[0]); ((T_MMI_AUDIO_FIR_REQ *)p_send_message)->fir_ul_coefficient = &(data_microphone->coefficient[0]); } /* send the start command to the audio L1 */ audio_send_l1_message(MMI_AUDIO_FIR_REQ, p_send_message); } else { AUDIO_SEND_TRACE("AUDIO MODE WRITE: FIR: the audio FIR message isn't send", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } #else AUDIO_SEND_TRACE("AUDIO MODE WRITE: FIR: FIR isn't supported", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif return (AUDIO_OK); } /********************************************************************************/ /********************** READ DRIVERS ******************************/ /********************************************************************************/ /********************************************************************************/ /* */ /* Function Name: audio_mode_voice_path_read */ /* */ /* Purpose: This function reads the current voice path. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current path voice. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_voice_path_read (T_AUDIO_VOICE_PATH_SETTING *data) { #ifndef _WINDOWS INT16 audio_init, dai_mode; dai_mode = (((l1s_dsp_com.dsp_ndb_ptr->d_dai_onoff)>>11) & 0x0003); audio_init = l1s_dsp_com.dsp_ndb_ptr->d_audio_init; // Note : // tested_device | dai_mode (bit 11 and 12) | test // ---------------|---------------------------|---------------- // 0 | 0 | no test // 1 | 2 | speech decoder // 2 | 1 | speech encoder // 3 | 0 | no test // 4 | 3 | Acouustic devices if(dai_mode == 0) /* There's no DAI mode */ { #if (AUDIO_MODE) if (audio_init & B_GSM_ONLY) { *data = AUDIO_GSM_VOICE_PATH; } else if (audio_init & B_BT_CORDLESS) { *data = AUDIO_BLUETOOTH_CORDLESS_VOICE_PATH; } else if (audio_init & B_BT_HEADSET) { *data = AUDIO_BLUETOOTH_HEADSET; } else { AUDIO_SEND_TRACE_PARAM("AUDIO MODE READ: voice path: error in audio path mode", audio_init, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } #else *data = AUDIO_GSM_VOICE_PATH; #endif } else { switch (dai_mode) { case 1: { *data = AUDIO_DAI_DECODER; break; } case 2: { *data = AUDIO_DAI_ENCODER; break; } case 3: { *data = AUDIO_DAI_ACOUSTIC; break; } default : { AUDIO_SEND_TRACE_PARAM("AUDIO MODE READ: voice path: error in DAI mode", dai_mode, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); break; } } } #else *data = AUDIO_GSM_VOICE_PATH; #endif return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_mode_read */ /* */ /* Purpose: This function reads the current microphone mode. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Microphone mode. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_mode_read (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 2) UINT16 vbcr2; #endif #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); vbcr2 = (l1s_dsp_com.dsp_ndb_ptr->d_vbctrl2 >> 6); #endif #if (ANLG_FAM == 2) if (vbcr2 & (AUDIO_VBCR2_MICBIASEL | AUDIO_VBCR2_MICNAUX)) { *data = AUDIO_MICROPHONE_HEADSET; } else #endif /* No headset mode */ { if (vbcr & AUDIO_VBCR_VULSWITCH) { *data = AUDIO_MICROPHONE_HANDHELD; } else { *data = AUDIO_MICROPHONE_HANDFREE; } } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_gain_read */ /* */ /* Purpose: This function reads the current microphone gain. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current microphone gain. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_gain_read (INT8 *data) { UINT8 i = 1; UINT16 vbur, vulpg; vbur = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl >> 6); if (vbur & AUDIO_VBUR_DXEN) { *data = AUDIO_MICROPHONE_MUTE; } else /* Microphone not muted */ { vulpg = (UINT16)(vbur & AUDIO_VBUR_VULPG); while (ABB_uplink_PGA_gain[i] != vulpg) { i++; if (i == 25) { AUDIO_SEND_TRACE_PARAM("AUDIO MODE READ: microphone gain: error in gain value", vulpg, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } } *data = (INT8)(i - 12); } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_extra_gain_read */ /* */ /* Purpose: This function reads the current microphone extra gain. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current microphone extra gain. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_extra_gain_read (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); #endif if (vbcr & AUDIO_VBCR_VBDFAUXG) { *data = AUDIO_MICROPHONE_AUX_GAIN_28_2dB; } else { *data = AUDIO_MICROPHONE_AUX_GAIN_4_6dB; } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_output_bias_read */ /* */ /* Purpose: This function reads the current microphone output bias. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current microphone output bias. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_output_bias_read (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); #endif if (vbcr & AUDIO_VBCR_MICBIAS) { *data = AUDIO_MICROPHONE_OUTPUT_BIAS_2_5V; } else { *data = AUDIO_MICROPHONE_OUTPUT_BIAS_2_0V; } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_microphone_fir_read */ /* */ /* Purpose: This function reads the current microphone FIR. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current microphone FIR. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_microphone_fir_read (T_AUDIO_FIR_COEF *data) { #if (FIR) UINT8 i; for (i=0; i<31; i++) { #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) // For this DSP code the FIR coefficients are in API param memory data->coefficient[i] = l1s_dsp_com.dsp_param_ptr->a_fir31_uplink[i]; #else data->coefficient[i] = l1s_dsp_com.dsp_ndb_ptr->a_fir31_uplink[i]; #endif } return (AUDIO_OK); #else AUDIO_SEND_TRACE("AUDIO MODE READ: microphone FIR: FIR isn't supported", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_mode_read */ /* */ /* Purpose: This function reads the current speaker mode. */ /* */ /* Input Parameters: */ /* None */ /* */ /* Output Parameters: */ /* Status. */ /* Current speaker mode. */ /* */ /* Note: */ /* None */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_mode_read (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 2) UINT16 vbcr2; #endif #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); vbcr2 = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl2 >> 6); #endif #if (ANLG_FAM == 2) if (vbcr2 & AUDIO_VBCR2_VDLHSO) { *data = AUDIO_SPEAKER_HEADSET; } else #endif /* No headset mode */ #if (ANLG_FAM != 3) if ( (vbcr & AUDIO_VBCR_VDLEAR) && (vbcr & AUDIO_VBCR_VDLAUX) ) { *data = AUDIO_SPEAKER_HANDHELD_HANDFREE; } else if (vbcr & AUDIO_VBCR_VDLEAR) { *data = AUDIO_SPEAKER_HANDHELD; } else if (vbcr & AUDIO_VBCR_VDLAUX) { *data = AUDIO_SPEAKER_HANDFREE; } else { *data = AUDIO_SPEAKER_BUZZER; } #endif return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_gain_read */ /* */ /* Purpose: This function reads the current speaker gain. */ /* */ /* Input Parameters: */ /* None */ /* */ /* Output Parameters: */ /* Status. */ /* Current speaker gain. */ /* */ /* Note: */ /* None */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_gain_read (INT8 *data) { UINT16 vbdr, vdlpg; UINT8 i=0; vbdr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbdctrl >> 6); vdlpg = (UINT16)(vbdr & AUDIO_VBDR_VDLPG); while (ABB_downlink_PGA_gain[i] != vdlpg) { i++; if (i == 13) { AUDIO_SEND_TRACE_PARAM("AUDIO MODE READ: speaker gain: error in gain value", vdlpg, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } } *data = (INT8)(i - 6); return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_filter_read */ /* */ /* Purpose: This function reads the current state of the DL filter. */ /* */ /* Input Parameters: */ /* None */ /* */ /* Output Parameters: */ /* Status. */ /* Current DL filter state. */ /* */ /* Note: */ /* None */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_filter_read (INT8 *data) { UINT16 vbcr; #if (ANLG_FAM == 1) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); #elif (ANLG_FAM == 2) vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 >> 6); #endif if (vbcr & AUDIO_VBCR_VFBYP) { *data = AUDIO_SPEAKER_FILTER_OFF; } else { *data = AUDIO_SPEAKER_FILTER_ON; } return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_fir_read */ /* */ /* Purpose: This function reads the speaker FIR. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current speaker FIR. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_fir_read (T_AUDIO_FIR_COEF *data) { #if (FIR) UINT8 i; for (i=0; i<31; i++) { #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) // For this DSP code the FIR coefficients are in API param memory data->coefficient[i] = l1s_dsp_com.dsp_param_ptr->a_fir31_downlink[i]; #else data->coefficient[i] = l1s_dsp_com.dsp_ndb_ptr->a_fir31_downlink[i]; #endif } return (AUDIO_OK); #else AUDIO_SEND_TRACE("AUDIO MODE READ: speaker FIR: FIR isn't supported", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_buzzer_read */ /* */ /* Purpose: This function reads the current state of the buzzer. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current buzzer state. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_buzzer_read (INT8 *data) { #if (ANLG_FAM== 1) UINT16 vbcr; vbcr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbctrl >> 6); if (vbcr & AUDIO_VBCR_VBUZ) { *data = AUDIO_SPEAKER_BUZZER_ON; } else { *data = AUDIO_SPEAKER_BUZZER_OFF; } return (AUDIO_OK); #endif #if (ANLG_FAM == 2) AUDIO_SEND_TRACE("AUDIO MODE READ: buzzer: this feature isn't supported by the current analog base band", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif } /********************************************************************************/ /* */ /* Function Name: audio_mode_sidetone_gain_read */ /* */ /* Purpose: This function reads the current sidetone gain. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current sidetone gain. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_sidetone_gain_read (INT8 *data) { UINT16 vbur, vdlst; UINT8 i=0; vbur = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl >> 11); vdlst = (UINT16)(vbur & AUDIO_VBUR_VDLST); while (ABB_sidetone_gain[i] != vdlst) { i++; if (i == 10) { AUDIO_SEND_TRACE_PARAM("AUDIO MODE READ: sidetone gain: error in gain value", vdlst, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } } *data = (INT8)((3 * i) - 26); return (AUDIO_OK); } /********************************************************************************/ /* */ /* Function Name: audio_mode_aec_read */ /* */ /* Purpose: This function reads the current AEC setting. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current AEC setting. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_aec_read (T_AUDIO_AEC_CFG *data) { #if (L1_NEW_AEC) UINT16 aec_ctrl; aec_ctrl = l1s.aec.aec_control; data->aec_enable = (UINT16)(aec_ctrl & AUDIO_AEC_ENABLE); data->aec_visibility = (UINT16)(aec_ctrl & AUDIO_AEC_VISIBILITY_ENABLE); data->noise_suppression_enable = (UINT16)(aec_ctrl & AUDIO_NOISE_SUPPRESSION_ENABLE); data->noise_suppression_level = (UINT16)(aec_ctrl & AUDIO_NOISE_18dB); data->continuous_filtering = l1s_dsp_com.dsp_ndb_ptr->d_cont_filter; data->granularity_attenuation = l1s_dsp_com.dsp_ndb_ptr->d_granularity_att; data->smoothing_coefficient = l1s_dsp_com.dsp_ndb_ptr->d_coef_smooth; data->max_echo_suppression_level = l1s_dsp_com.dsp_ndb_ptr->d_es_level_max; data->vad_factor = l1s_dsp_com.dsp_ndb_ptr->d_fact_vad; data->absolute_threshold = l1s_dsp_com.dsp_ndb_ptr->d_thrs_abs; data->factor_asd_filtering = l1s_dsp_com.dsp_ndb_ptr->d_fact_asd_fil; data->factor_asd_muting = l1s_dsp_com.dsp_ndb_ptr->d_fact_asd_mut; return (AUDIO_OK); #elif (AEC) UINT16 aec_ctrl; aec_ctrl = l1s.aec.aec_control; data->aec_enable = (UINT16)(aec_ctrl & AUDIO_AEC_ENABLE); data->aec_mode = (UINT16)(aec_ctrl & AUDIO_SHORT_ECHO); data->echo_suppression_level = (UINT16)(aec_ctrl & AUDIO_ECHO_18dB); data->noise_suppression_enable = (UINT16)(aec_ctrl & AUDIO_NOISE_SUPPRESSION_ENABLE); data->noise_suppression_level = (UINT16)(aec_ctrl & AUDIO_NOISE_18dB); return (AUDIO_OK); #else AUDIO_SEND_TRACE("AUDIO MODE READ: AEC: feature not supported", RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); #endif } /********************************************************************************/ /* */ /* Function Name: audio_mode_speaker_volume_read */ /* */ /* Purpose: This function reads the current speaker volume. */ /* */ /* Input Parameters: */ /* None. */ /* */ /* Output Parameters: */ /* Status. */ /* Current speaker volume. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* None. */ /* */ /********************************************************************************/ T_AUDIO_RET audio_mode_speaker_volume_read (T_AUDIO_SPEAKER_LEVEL *data) { UINT16 vbdr, volctl; UINT8 i=0; vbdr = (UINT16)(l1s_dsp_com.dsp_ndb_ptr->d_vbdctrl >> 10); volctl = (UINT16)(vbdr & AUDIO_VBDR_VOLCTL); while (ABB_volume_control_gain[i] != volctl) { i++; if (i == 6) { AUDIO_SEND_TRACE_PARAM("AUDIO MODE READ: speaker volume: error in volume value", volctl, RV_TRACE_LEVEL_ERROR); return(AUDIO_ERROR); } } if ( (i == 0) || (i == 1) ) { data->audio_speaker_level = i; } else { data->audio_speaker_level = (UINT8)((i - 1) * 50); } return (AUDIO_OK); } #endif /* RVM_AUDIO_MAIN_SWE */