FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/tcpip/include/rvm_priorities.h @ 263:b5e8dfd114a7
Switch_ON(): go into charging boot mode on either CHGSTS or CHGPRES
If someone were to plug and then unplug a charger into a switched-off
phone in an extremely brief "glitch" manner, we should do an automatic
power-off on boot in this condition. When we were checking only
CHGPRES in Switch_ON(), we would go into Misc boot state instead,
which is undesirable. Now if we have a CHGSTS but not CHGPRES
condition, we will go into charging boot mode, and FCBM will then
do the automatic power-off upon detecting absence of the charger
in its periodic polling.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Fri, 14 May 2021 05:50:36 +0000 |
| parents | fa8dc04885d8 |
| children |
line wrap: on
line source
/**************************************************************************** * * * Name rvm_priorities.h * * * * Function this file priorities defintitions for basic SWEs * * It includes a file rvm_ext_priorities.h where are defined * * "custom" priorities. * * * * Version 0.1 * * * * Date Modification * * ------------------------------------ * * 10/11/2000 Create * * * * Author Cristian Livadiotti (c-livadiotti@ti.com) * * * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved* ****************************************************************************/ #ifndef __RVM_PRIORITIES_H_ #define __RVM_PRIORITIES_H_ #include "rvm_ext_priorities.h" /* PRIORITIES SETTING: */ /* All user priority should be set under 250: */ /* Higher values are reserved */ /* ** Bluetooth Priorities: ** All set to same value, except ATP (not a task) and HCI (valid on PC only) */ #define RVM_HCI_TASK_PRIORITY (250) #define RVM_L2CAP_TASK_PRIORITY (240) #define RVM_BTCTRL_TASK_PRIORITY (240) #define RVM_RFCOMM_TASK_PRIORITY (240) #define RVM_SPP_TASK_PRIORITY (240) #define RVM_SDP_TASK_PRIORITY (240) #define RVM_HSG_TASK_PRIORITY (240) #define RVM_DUN_GW_TASK_PRIORITY (240) #define RVM_FAX_GW_TASK_PRIORITY (240) #define RVM_ATP_UART_TASK_PRIORITY (240) #define RVM_ATP_TASK_PRIORITY (255) /* ** Drivers and Services Priorities ** Note: FFS priority should be lower than every user */ #define RVM_SPI_TASK_PRIORITY (39) #define RVM_TTY_TASK_PRIORITY (240) #define RVM_AUDIO_TASK_PRIORITY (245) #define RVM_AUDIO_BGD_TASK_PRIORITY (246) #define RVM_RTC_TASK_PRIORITY (248) #define RVM_FFS_TASK_PRIORITY (250) #define RVM_TRACE_TASK_PRIORITY (251) #define RVM_DAR_TASK_PRIORITY (245) #define RVM_ETM_TASK_PRIORITY (249) #define RVM_MKS_TASK_PRIORITY (255) #define RVM_KPD_TASK_PRIORITY (10) #define RVM_MPM_TASK_PRIORITY (242) #define RVM_RNET_WS_TASK_PRIORITY (80) #define RVM_RNET_RT_TASK_PRIORITY (240) #define RVM_DCM_TASK_PRIORITY (240) #define RVM_MFW_TASK_PRIORITY (245) /* ** RV Test Menu and Dummy Tasks Priorities */ #define RVM_RVTEST_MENU_TASK_PRIORITY (240) #define RVM_DUMMY_TASK_PRIORITY (80) //#define IDLE_TASK_PRIORITY (80) /* A-M-E-N-D-E-D! */ #define RVM_INVKR_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE1_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE2_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE3_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE4_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE5_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TE6_TASK_PRIORITY (240) /* A-M-E-N-D-E-D! */ #define RVM_TMS_TASK_PRIORITY (200) /* A-M-E-N-D-E-D! */ #endif /* __RVM_PRIORITIES_H_ */