FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/abb/board/abb_inth.c @ 230:baa738eeb842
FCBM code implemented in first pass
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 01 May 2021 10:05:53 +0000 |
parents | 0947a816580c |
children | 45cc81cc6230 |
line wrap: on
line source
/**********************************************************************************/ /* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION */ /* */ /* Property of Texas Instruments -- For Unrestricted Internal Use Only */ /* Unauthorized reproduction and/or distribution is strictly prohibited. This */ /* product is protected under copyright law and trade secret law as an */ /* unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All */ /* rights reserved. */ /* */ /* */ /* Filename : abb_inth.c */ /* */ /* Description : Functions to manage the ABB device interrupt. */ /* The Serial Port Interface is used to connect the TI */ /* Analog BaseBand (ABB). */ /* It is assumed that the ABB is connected as the SPI */ /* device 0, and ABB interrupt is mapped as external IT. */ /* */ /* Author : Pascal PUEL */ /* */ /* Version number : 1.2 */ /* */ /* Date and time : 07/02/03 */ /* */ /* Previous delta : Creation */ /* */ /**********************************************************************************/ /* */ /* 17/12/03 */ /* The original abb_inth.c has been splitted between the actual abb_inth.c */ /* located in drv_apps directory and abb_inth_core.c located in drv_core */ /* directory. */ /* */ /**********************************************************************************/ #include "l1sw.cfg" #include "chipset.cfg" #include "swconfig.cfg" #include "sys.cfg" #include "fc-target.h" #include "l1_macro.h" #include "l1_confg.h" #include <string.h> #include "abb/abb_inth.h" #include "nucleus.h" #include "rv/rv_defined_swe.h" // for RVM_PWR_SWE #if (CHIPSET == 12) #include "sys_inth.h" #else #include "inth/iq.h" #endif #include "cust_os.h" #include "l1_signa.h" #include "abb/abb.h" #if defined (OP_WCP) #include "ffs/ffs.h" #include "ffs/board/ffspcm.h" #endif #include "rvm/rvm_use_id_list.h" // for SPI_USE_ID #include "spi/spi_env.h" #include "spi/spi_process.h" // for ABB_EXT_IRQ_EVT #include "kpd/kpd_power_api.h" // for kpd_power_key_pressed() #include "power/power.h" #ifdef RVM_LCC_SWE #include "lcc/lcc_api.h" #include "lcc/lcc_cfg_i.h" #include "lcc/lcc.h" #include "lcc/lcc_env.h" #endif #ifdef RVM_FCHG_SWE #include "fchg/fchg_struct.h" #include "fchg/fchg_messages.h" #endif /********************************************************************************/ /* */ /* Function Name: spi_abb_read_int_reg_callback */ /* */ /* Purpose: Callback function */ /* Called when an external interrupt has occured and the */ /* ABB interrupt register has been read. */ /* */ /********************************************************************************/ void spi_abb_read_int_reg_callback(SYS_UWORD16 *read_value) { SYS_UWORD16 loop_count; SYS_UWORD16 status_value; xSignalHeaderRec *adc_msg; volatile SYS_UWORD8 i; #if (defined(RVM_LCC_SWE) || defined(RVM_FCHG_SWE)) struct pwr_adc_ind_s *addr; extern T_PWR_CTRL_BLOCK *pwr_ctrl; #endif // check all the possible causes of the ABB IT if (*read_value & PUSHOFF_IT_STS) { /* Push Button from ON to OFF */ /* condition below removed in FreeCalypso */ /* if (SPI_GBL_INFO_PTR->is_gsm_on == TRUE) */ { NU_Sleep(SHORT_OFF_KEY_PRESSED); // WCP Patch #if (OP_WCP == 1) // Backup of GSM FFS is remotely handled by MPU-S // we trigger the backup upon each ON->OFF transition ffs_backup (); #else /* Since this callback function is called from the SPI task it can't be interrupted by another task so we can directly access the SPI through the low-level driver */ #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) status_value = (ABB_Read_Status() & ONREFLT); #elif (ANLG_FAM == 3) status_value = (ABB_Read_Register_on_page(PAGE1, VRPCCFG) & PWOND); #endif if (status_value == PWR_OFF_KEY_PRESSED) { /* Inform keypad that key ON/OFF has been pressed */ #ifndef CONFIG_TARGET_COMPAL kpd_power_key_pressed(); #endif loop_count = 0; /* Wait loop for Power-OFF */ while ((loop_count < OFF_LOOP_COUNT) && (status_value == PWR_OFF_KEY_PRESSED)) { NU_Sleep(SHORT_OFF_KEY_PRESSED); #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) status_value = (ABB_Read_Status() & ONREFLT); #elif (ANLG_FAM == 3) status_value = (ABB_Read_Register_on_page(PAGE1, VRPCCFG) & PWOND); #endif loop_count++; } if (status_value == PWR_OFF_KEY_PRESSED) /* Power-OFF request detected */ { rvf_send_trace("IQ EXT: Power Off request",25, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, SPI_USE_ID); Power_OFF_Button(); } } #endif //WCP } } else if (*read_value & REMOT_IT_STS) { rvf_send_trace("IQ EXT: Power Off remote request",32, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, SPI_USE_ID); /* 'Remote Power' from ON to OFF */ Power_OFF_Remote(); } else if (*read_value & ADCEND_IT_STS) { rvf_send_trace("IQ EXT: ADC End",15, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, SPI_USE_ID); /* ADC end of conversion */ ABB_Read_ADC(&SPI_GBL_INFO_PTR->adc_result[0]); adc_msg = os_alloc_sig(sizeof(T_CST_ADC_RESULT)); if(adc_msg != NULL) { adc_msg->SignalCode = CST_ADC_RESULT; for(i=0;i<MADC_NUMBER_OF_MEAS;i++) { ((T_CST_ADC_RESULT *)(adc_msg->SigP))->adc_result[i] = SPI_GBL_INFO_PTR->adc_result[i]; } os_send_sig(adc_msg, RRM1_QUEUE); #if (defined(RVM_LCC_SWE) || defined(RVM_FCHG_SWE)) // Send ADC measurement to PWR (LCC) task // NOTE that memory is allocated externally in the PWR task if (rvf_get_buf(pwr_ctrl->prim_id, sizeof(struct pwr_adc_ind_s), (void *)&addr) == RVF_RED) { rvf_send_trace("rvf_get_buf failed",18, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); /* Unmask External interrupt */ IQ_Unmask(IQ_EXT); // rvf_dump_mem(); return; } addr->header.msg_id = PWR_ADC_IND; addr->header.src_addr_id = SPI_GBL_INFO_PTR->addr_id; addr->header.dest_addr_id = pwr_ctrl->addr_id; addr->header.callback_func = NULL; // FIXME: memcpy from SPI_GBL_INFO_PTR->adc_result - make sure it has not been de-allocated memcpy(addr->data, SPI_GBL_INFO_PTR->adc_result, 8*2); addr->data[9] = ABB_Read_Status();; // Read & assign ITSTATREG status so we save the polling in PWR task!! if (rvf_send_msg(pwr_ctrl->addr_id, addr) != RV_OK) { rvf_send_trace("SPI FATAL: Send failed!",23, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); } #endif } } #if (defined(RVM_PWR_SWE) || defined(RVM_LCC_SWE) || defined(RVM_FCHG_SWE)) else if (*read_value & CHARGER_IT_STS) { /* Charger plug IN or OUT */ #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) status_value = ABB_Read_Status(); #elif (ANLG_FAM == 3) status_value = ABB_Read_Register_on_page(PAGE1, VRPCCFG); #endif if (status_value & CHGPRES) { rvf_send_trace("IQ EXT: Charger Plug",20, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, SPI_USE_ID); #ifdef RVM_PWR_SWE PWR_Charger_Plug(); /* charger plugged IN */ #endif #if (defined(RVM_LCC_SWE) || defined(RVM_FCHG_SWE)) // Forward charger plug indication to PWR (LCC) task // NOTE that memory is allocated externally in the PWR task if (rvf_get_buf(pwr_ctrl->prim_id, sizeof(struct pwr_req_s), (void *)&addr) == RVF_RED) { rvf_send_trace("rvf_get_buf failed#1",20, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); rvf_dump_mem(); } addr->header.msg_id = PWR_CHARGER_PLUGGED_IND; addr->header.src_addr_id = SPI_GBL_INFO_PTR->addr_id; addr->header.dest_addr_id = pwr_ctrl->addr_id; addr->header.callback_func = NULL; if (rvf_send_msg(pwr_ctrl->addr_id, addr) != RV_OK) { rvf_send_trace("SPI FATAL: Send failed!",23, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); } #endif } else { rvf_send_trace("IQ EXT: Charger Unplug",22, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, SPI_USE_ID); #ifdef RVM_PWR_SWE PWR_Charger_Unplug(); /* charger plugged OUT */ #endif #if (defined(RVM_LCC_SWE) || defined(RVM_FCHG_SWE)) // Forward charger unplug indication to PWR (LCC) task // NOTE that memory is allocated externally in the PWR task if (rvf_get_buf(pwr_ctrl->prim_id, sizeof(struct pwr_req_s), (void *)&addr) == RVF_RED) { rvf_send_trace("rvf_get_buf failed#2",20, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); rvf_dump_mem(); } addr->header.msg_id = PWR_CHARGER_UNPLUGGED_IND; addr->header.src_addr_id = SPI_GBL_INFO_PTR->addr_id; addr->header.dest_addr_id = pwr_ctrl->addr_id; addr->header.callback_func = NULL; if (rvf_send_msg(pwr_ctrl->addr_id, addr) != RV_OK) { rvf_send_trace("SPI FATAL: Send failed!",23, NULL_PARAM, RV_TRACE_LEVEL_DEBUG_LOW, LCC_USE_ID); } #endif } } #endif /* RVM_PWR_SWE || RVM_LCC_SWE */ /* Unmask External interrupt */ #if (CHIPSET == 12) // Unmask ABB ext interrupt F_INTH_ENABLE_ONE_IT(C_INTH_ABB_IRQ_IT); #else // Unmask external (ABB) interrupt IQ_Unmask(IQ_EXT); #endif }