FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/fchg/bsim_etm_cmd.h @ 286:ee16d57b32b2
Condat audio_Init(): rm setting of sidetone level
The default sidetone level in the absence of audio mode loading
is just that, a basic default without any promises of good tuning.
In the original TCS211 code this default sidetone level was set in
two places: first in L1 init of ABB-via-DSP registers (set to -17 dB),
and then initialized again in Condat audio_Init(), this time set to
-5 dB. The present change removes the redundant second initialization.
The default sidetone level is now -17 dB instead of -5 dB with this
change, but again it is just the default; all serious users are now
expected to use audio mode config files.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 09 Nov 2021 02:16:59 +0000 |
| parents | aec644728174 |
| children |
line wrap: on
line source
/* * This header file defines ETM commands that can be sent from a * development host to FCHG operating in BSIM mode. */ #ifndef __BSIM_ETM_CMD_H #define __BSIM_ETM_CMD_H /* ETM_BSIM command opcodes */ #define BSIM_CMD_QUERY 0x00 #define BSIM_CMD_DISCHARGE 0x01 /* 1 byte with battery % follows */ #define BSIM_CMD_CHG_START 0x02 #define BSIM_CMD_CHG_CI2CV 0x03 #define BSIM_CMD_CHG_COMPLETE 0x04 #define BSIM_CMD_SET_ICHG 0x05 /* 2 bytes of Ichg value follow */ #define BSIM_CMD_START_ENABLE 0x06 /* 1 byte with flag follows */ /* status response codes */ #define BSIM_STAT_OK 0x00 #define BSIM_ERR_BAD_CMD 0x02 #define BSIM_ERR_WRONG_STATE 0x03 #define BSIM_ERR_INV_PERCENT 0x04 #define BSIM_ERR_INV_DISCHARGE 0x05 #endif /* include guard */