FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/dyn_dwl_include/l1_dyn_dwl_signa.h @ 286:ee16d57b32b2
Condat audio_Init(): rm setting of sidetone level
The default sidetone level in the absence of audio mode loading
is just that, a basic default without any promises of good tuning.
In the original TCS211 code this default sidetone level was set in
two places: first in L1 init of ABB-via-DSP registers (set to -17 dB),
and then initialized again in Condat audio_Init(), this time set to
-5 dB. The present change removes the redundant second initialization.
The default sidetone level is now -17 dB instead of -5 dB with this
change, but again it is just the default; all serious users are now
expected to use audio mode config files.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 09 Nov 2021 02:16:59 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_DYN_DWL_SIGNA.H * * Filename l1_dyn_dwl_signa.h * Copyright 2004 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (L1_DYN_DSP_DWNLD == 1) #ifndef _L1_DYN_DWL_SIGNA_H_ #define _L1_DYN_DWL_SIGNA_H_ #define P_DYN_DWNLD 0x41 // Messages L1S -> L1A #define L1_DYN_DWNLD_STOP_CON ( ( P_DYN_DWNLD << 8 ) | 0x02 ) // Messages API HISR -> L1A // #define API_L1_DYN_DWNLD_START_CON ( ( P_DYN_DWNLD << 8 ) | 0x03 ) #define API_L1_DYN_DWNLD_FINISHED ( ( P_DYN_DWNLD << 8 ) | 0x04 ) #define API_L1_DYN_DWNLD_STOP ( ( P_DYN_DWNLD << 8 ) | 0x05 ) #define API_L1_CRC_NOT_OK ( ( P_DYN_DWNLD << 8 ) | 0x07 ) #define API_L1_CRC_OK ( ( P_DYN_DWNLD << 8 ) | 0x08 ) #define API_L1_DYN_DWNLD_UNINST_OK ( ( P_DYN_DWNLD << 8 ) | 0x09 ) #endif //_L1_DYN_DWL_SIGNA_H_ #endif // L1_DYN_DSP_DWNLD