view src/cs/layer1/gtt_include/ctm/ctm_receiver.h @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*
*******************************************************************************
*
*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
*      90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100
*
*      The program(s) may be used and/or copied only with the
*      written permission from Ericsson or in accordance
*      with the terms and conditions stipulated in the agreement or
*      contract under which the program(s) have been supplied.
*
*******************************************************************************
*
*      File             : ctm_receiver.h
*      Author           : EEDN/RV Matthias Doerbecker
*      Tested Platforms : Sun Solaris, Windows NT 4.0
*      Description      : header file for ctm_receiver.c
*
*      Changes since October 13, 2000:
*      - added reset function reset_ctm_receiver()
*
*      $Log: $
*
*******************************************************************************
*/
#ifndef ctm_receiver_h
#define ctm_receiver_h "$Id: $"

/*
*******************************************************************************
*                         INCLUDE FILES
*******************************************************************************
*/

#include "init_interleaver.h"
//#include "tonedemod.h"
#include "wait_for_sync.h"
#include "conv_poly.h"
#include "viterbi.h"
#include "ctm_typedefs.h"
#include "fifo.h"

#include <stdlib.h>
#include <stdio.h> 


/* ******************************************************************/
/* Type definitions for variables that contain all states of the    */
/* Cellular Text Telephone Modem (CTM) Transmitter and Receiver,    */
/* respectively.                                                    */
/* ******************************************************************/

typedef struct {
  /* simple variables */
  WORD16    samplingCorrection;
  WORD16    numBitsWithLowReliability;
  WORD16    cntIdleSymbols;
  WORD16    numDeintlBits;
  WORD16    cntRXBits;
  WORD16    syncCorrect;
  WORD16    cntUnreliableGrossBits;
  WORD16    intl_delay;
  
  /* structs (state types) */
  fifo_state_t          rx_bits_fifo_state;
  fifo_state_t          octet_fifo_state;
  fifo_state_t          net_bits_fifo_state;
  //demod_state_t         tonedemod_state;
  // interleaver_state_t   intl_state;
  interleaver_state_t   deintl_state;
  wait_for_sync_state_t wait_state;
  viterbi_t             viterbi_state;
   
  /* vectors (not to be allocated) */
#if (NUM_MUTE_ROWS>0)
  WORD16    mutePositions[intlvB*NUM_MUTE_ROWS];
#else
  WORD16    mutePositions[1];
#endif

  /* vectors (to be allocated in init_ctm_receiver()) */
  WORD16    *waitSyncOut;
  WORD16    *deintlOut;

} rx_state_t;




/***********************************************************************/
/* init_ctm_receiver()                                                 */
/* *******************                                                 */
/* Initialization of the CTM Receiver.                                 */
/*                                                                     */
/* output vaiables:                                                    */
/* rx_state :   pointer to a variable of rx_state_t containing the     */
/*              initialized states of the receiver                     */
/***********************************************************************/

void init_ctm_receiver(rx_state_t* rx_state);

/*
 ***********************************************************************
 * Shutdown_ctm_receiver()                                             *
 * ***********************                                             *
 * Shutdown of the CTM Receiver.                                       *
 *                                                                     *
 * Input variables:                                                    *
 * rx_state :   pointer to a variable of rx_state_t containing the     *
 *              initialized states of the receiver                     *
 ***********************************************************************
*/
void Shutdown_ctm_receiver(rx_state_t* rx_state);

/*
 ***********************************************************************
 * reset_ctm_receiver()                                                *
 * ********************                                                *
 * Reset of the Cellular Text Telephone Modem receiver, state          *
 * machines and buffer pointers.                                       *
 *                                                                     *
 * Input variables:                                                    *
 * rx_state :   pointer to a variable of rx_state_t containing the     *
 *              initialized states of the receiver                     *
 ***********************************************************************
*/
void reset_ctm_receiver(rx_state_t* rx_state);


/***************************************************************************/
/* ctm_receiver()                                                          */
/* **************                                                          */
/* Runs the Cellular Text Telephone Modem Receiver for a block of          */
/* (nominally) 160 samples. Due to the internal synchronization, the       */
/* number of processed samples might vary between 156 and 164 samples.     */
/* The input of the samples and the output of the decoded characters       */
/* is handled via fifo buffers, which have to be initialized               */
/* externally before using this function (see fifo.h for details).         */
/*                                                                         */
/* input/output variables:                                                 */
/* *ptr_signal_fifo_state      fifo state for the input samples            */
/* *ptr_output_char_fifo_state fifo state for the output characters        */
/* *ptr_early_muting_required  returns whether the original audio signal   */
/*                             must not be forwarded. This is to guarantee */
/*                             that the preamble or resync sequence is     */
/*                             detected only by the first CTM device, if   */
/*                             several CTM devices are cascaded            */
/*                             subsequently.                               */
/* *rx_state                   pointer to the variable containing the      */
/*                             receiver states                             */
/***************************************************************************/

void ctm_receiver(fifo_state_t*  ptr_signal_fifo_state,
                  fifo_state_t*  ptr_output_char_fifo_state,
                  BOOL*          ptr_early_muting_required,
                  rx_state_t*    rx_state);

#endif