view src/cs/layer1/gtt_include/ctm/viterbi.h @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*
*******************************************************************************
*
*      COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH
*
*      The program(s) may be used and/or copied only with the
*      written permission from Ericsson or in accordance
*      with the terms and conditions stipulated in the agreement or
*      contract under which the program(s) have been supplied.
*
*******************************************************************************
*
*      File             : viterbi.h
*      Purpose          : Header file for viterbi.c
*      Author           : Francisco Javier Gil Gomez
*
*      Revision history
*
*      $Log: $
*
*******************************************************************************
*/

#ifndef viterbi_h
#define viterbi_h "$Id: $"

#include <stdio.h>
#include <math.h>

#include "conv_poly.h"   /* definition of viterbi_t */


/***********************************************************************/
/* viterbi_init()                                                      */
/* **************                                                      */
/* Initialization of the Viterbi decoder.                              */
/*                                                                     */
/* output variables:                                                   */
/* *viterbi_state   initialized state variable of the decoder          */
/*                                                                     */
/***********************************************************************/

void viterbi_init(viterbi_t* viterbi_state);


/***********************************************************************/
/* viterbi_reinit()                                                    */
/* ****************                                                    */
/* Re-Initialization of the Viterbi decoder. This function should be   */
/* used for re-setting a Viterbi decoder that has already been         */
/* initialized. In contrast to viterbi_init(), this reinit function    */
/* does not calculate the values of all members of viterbi_state that  */
/* do not change during the execution of the Viterbi algorithm.        */
/*                                                                     */
/* output variables:                                                   */
/* *viterbi_state   initialized state variable of the decoder          */
/*                                                                     */
/***********************************************************************/

void viterbi_reinit(viterbi_t* viterbi_state);


/***********************************************************************/
/* viterbi_exec()                                                      */
/* **************                                                      */
/* Execution of the Viterbi decoder                                    */
/*                                                                     */
/* input variables:                                                    */
/* inputword            Vector with gross bits                         */
/* length_input         Number of valid gross bits in vector inputword.*/
/*                      length_input must be an integer multiple of    */
/*                      CHC_RATE                                       */
/*                                                                     */
/* output variables:                                                   */
/* out                  Vector with the decoded net bits. The net bits */
/*                      are either 0 or 1.                             */
/* *num_valid_out_bits  Number of valid bits in vector out             */
/*                                                                     */
/* input/output variables:                                             */
/* *viterbi_state       State variable of the decoder                  */
/*                                                                     */
/***********************************************************************/

void viterbi_exec(WORD16*  inputword, WORD16  length_input, 
                  WORD16*  out,       WORD16* num_valid_out_bits,
                  viterbi_t* viterbi_state);

#endif