FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/include/l1_rtt_macro.h @ 268:f2e52cab0a73

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1_RTT_MACRO.H
 *
 *        Filename %M%
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#if (defined RVM_RTT_SWE || (OP_L1_STANDALONE == 1))

#include "rvt_gen.h"
#include "rtt_gen.h"

extern T_TRACE_INFO_STRUCT trace_info;
                                                                    
/***********************************************************************************************************/
/* Macro for cell enabling checking                                                                        */
/***********************************************************************************************************/

#define SELECTED_BITMAP(enable_bit) \
  enable_bit < 32  ? (0x0001 << (enable_bit -   0)) & trace_info.current_config->rttl1_cell_enable[0] : \
  enable_bit < 64  ? (0x0001 << (enable_bit -  32)) & trace_info.current_config->rttl1_cell_enable[1] : \
  enable_bit < 96  ? (0x0001 << (enable_bit -  64)) & trace_info.current_config->rttl1_cell_enable[2] : \
  enable_bit < 128 ? (0x0001 << (enable_bit -  96)) & trace_info.current_config->rttl1_cell_enable[3] : \
  enable_bit < 160 ? (0x0001 << (enable_bit - 128)) & trace_info.current_config->rttl1_cell_enable[4] : \
  enable_bit < 192 ? (0x0001 << (enable_bit - 160)) & trace_info.current_config->rttl1_cell_enable[5] : \
  enable_bit < 224 ? (0x0001 << (enable_bit - 192)) & trace_info.current_config->rttl1_cell_enable[6] : \
                     (0x0001 << (enable_bit - 224)) & trace_info.current_config->rttl1_cell_enable[7]

/***********************************************************************************************************/
/* Macros for buffer filling                                                                               */
/***********************************************************************************************************/

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: FN
                                     
#define RTTL1_FILL_FN(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FN)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FN))) != NULL) \
      { \
        ((T_RTTL1_FN *)ptr)->fn          = param1; \
        ((T_RTTL1_FN *)ptr)->cell_id     = RTTL1_ENABLE_FN; \
      } \
  }

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: Downlink burst
                                     
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_BURST))                                                                  \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_BURST))) != NULL) \
      { \
        ((T_RTTL1_DL_BURST *)ptr)->angle       = param1; \
        ((T_RTTL1_DL_BURST *)ptr)->snr         = param2; \
        ((T_RTTL1_DL_BURST *)ptr)->afc         = param3; \
        ((T_RTTL1_DL_BURST *)ptr)->task        = param4; \
        ((T_RTTL1_DL_BURST *)ptr)->pm          = param5; \
        ((T_RTTL1_DL_BURST *)ptr)->toa         = param6; \
        ((T_RTTL1_DL_BURST *)ptr)->input_level = param7; \
        ((T_RTTL1_DL_BURST *)ptr)->cell_id     = RTTL1_ENABLE_DL_BURST; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Normal Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_NB(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_NB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_NB))) != NULL) \
      { \
        ((T_RTTL1_UL_NB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_NB *)ptr)->ta      = param2; \
        ((T_RTTL1_UL_NB *)ptr)->txpwr   = param3; \
        ((T_RTTL1_UL_NB *)ptr)->cell_id = RTTL1_ENABLE_UL_NB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Access Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_AB(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_AB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_AB))) != NULL) \
      { \
        ((T_RTTL1_UL_AB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_AB *)ptr)->txpwr   = param2; \
        ((T_RTTL1_UL_AB *)ptr)->cell_id = RTTL1_ENABLE_UL_AB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FULL_LIST_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FULL_LIST_MEAS))) != NULL) \
      {                                                                                                       \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_FULL_LIST_MEAS; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MON_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MON_MEAS))) != NULL) \
      { \
        ((T_RTTL1_MON_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_MON_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_MON_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_MON_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_MON_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_MON_MEAS; \
      } \
  }                                                                                                           

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink DCCH block                                                                   
                                                                                                              
#define RTTL1_FILL_DL_DCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_DCCH *)ptr)->valid_flag    = param1; \
        ((T_RTTL1_DL_DCCH *)ptr)->physical_info = param2; \
        ((T_RTTL1_DL_DCCH *)ptr)->cell_id       = RTTL1_ENABLE_DL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PTCCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PTCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PTCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PTCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PTCCH *)ptr)->crc        = param1; \
        ((T_RTTL1_DL_PTCCH *)ptr)->ordered_ta = param2; \
        ((T_RTTL1_DL_PTCCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PTCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink DCCH block                                                                     
                                                                                                              
#define RTTL1_FILL_UL_DCCH \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_UL_DCCH *)ptr)->cell_id = RTTL1_ENABLE_UL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink SACCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_SACCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_SACCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_SACCH))) != NULL) \
      { \
        ((T_RTTL1_UL_SACCH *)ptr)->data_present   = param1; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_ta    = param2; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_txpwr = param3; \
        ((T_RTTL1_UL_SACCH *)ptr)->cell_id        = RTTL1_ENABLE_UL_SACCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PDTCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PDTCH *)ptr)->mac_header = param1; \
        ((T_RTTL1_DL_PDTCH *)ptr)->tfi_result = param2; \
        ((T_RTTL1_DL_PDTCH *)ptr)->crc        = param3; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cs_type    = param4; \
        ((T_RTTL1_DL_PDTCH *)ptr)->timeslot   = param5; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink PDTCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_UL_PDTCH *)ptr)->cs_type      = param1; \
        ((T_RTTL1_UL_PDTCH *)ptr)->data_allowed = param2; \
        ((T_RTTL1_UL_PDTCH *)ptr)->timeslot     = param3; \
        ((T_RTTL1_UL_PDTCH *)ptr)->cell_id      = RTTL1_ENABLE_UL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MAC-S error                                                                           
                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MACS_STATUS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MACS_STATUS))) != NULL) \
      { \
        ((T_RTTL1_MACS_STATUS *)ptr)->status   = param1; \
        ((T_RTTL1_MACS_STATUS *)ptr)->timeslot = param2; \
        ((T_RTTL1_MACS_STATUS *)ptr)->cell_id  = RTTL1_ENABLE_MACS_STATUS; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: L1S task enable                                                                       
                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_L1S_TASK_ENABLE)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_L1S_TASK_ENABLE))) != NULL) \
      { \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap1  = param1; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap2  = param2; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->cell_id  = RTTL1_ENABLE_L1S_TASK_ENABLE; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MFTAB trace                                                                       
                                                                                                              
#define RTTL1_FILL_MFTAB(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MFTAB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MFTAB))) != NULL) \
      { \
        ((T_RTTL1_MFTAB *)ptr)->func     = param1; \
        ((T_RTTL1_MFTAB *)ptr)->cell_id  = RTTL1_ENABLE_MFTAB; \
      } \
  }

/***********************************************************************************************************/ 
/* Macro for events                                                                                        */ 
/***********************************************************************************************************/
                                                                                                              
#define RTTL1_EVENT(id,size) \
  if (trace_info.current_config->rttl1_event_enable & (0x1 << id)) \
    trace_info.l1s_rtt_func.rtt_dump_buffer(trace_info.l1s_trace_user_id, size);
#else // RVM_RTT_SWE || OP_L1_STANDALONE

// No RTT: all macros are empty
#define SELECTED_BITMAP(enable_bit) (0)                                   
#define RTTL1_FILL_FN(param1)                                      
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7)                                                                                                               
#define RTTL1_FILL_UL_NB(param1, param2, param3)                                                                                                               
#define RTTL1_FILL_UL_AB(param1, param2)                                                                                                               
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_DL_DCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_DL_PTCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_UL_DCCH                                                                                                               
#define RTTL1_FILL_UL_SACCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5)                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2)                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2)                                                                                                              
#define RTTL1_FILL_MFTAB(param1)
#define RTTL1_EVENT(id,size)

#endif // RVM_RTT_SWE || OP_L1_STANDALONE