view src/g23m-gprs/grlc/grlc_func.c @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  GRLC
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity GRLC and implements all
|             functions according to 921bis.doc
+----------------------------------------------------------------------------- 
*/ 

#ifndef GRLC_FUNC_C
#define GRLC_FUNC_C
#endif


#define ENTITY_GRLC


/*==== INCLUDES =============================================================*/


#include <string.h>
#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "ccdapi.h"     /* to get CCD API */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "message.h"    /* to get air message definitions */
#include "grlc.h"        /* to get the global entity definitions */
#include "grlc_func.h"   /* to check the function */
#include "grlc_f.h"      /* to get the global entity definitions */
#include "grlc_tpcs.h"

/* patch to avoid overwriting of primitives in global variable QueueMsg[] */
#undef VSI_CALLER_SINGLE
#define VSI_CALLER_SINGLE 0
  

/*==== CONST ================================================================*/

/*==== DIAGNOSTICS ==========================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/
/*
+------------------------------------------------------------------------------
| Function    : maca_power_control
+------------------------------------------------------------------------------
| Description : The function maca_power_control() is described in 921bis.doc
|
| Parameters  : see 921bis.doc
|
+------------------------------------------------------------------------------
*/
GLOBAL void maca_power_control ( UWORD8  assignment_id,
                                 BOOL    crc_error,
                                 WORD8   bcch_level,
                                 UWORD16 radio_freq[MAC_BURST_PER_BLOCK],
                                 WORD8   burst_level[MAC_BURST_PER_BLOCK],
                                 UWORD8 *pch )
{
  UBYTE i; /* used for counting */

  tpc_get_pch( pch );

  grlc_data->func.mac_pwr_ctrl_ind.assignment_id = assignment_id;
  grlc_data->func.mac_pwr_ctrl_ind.crc_error     = ( crc_error ? GRLC_CRC_FAIL : GRLC_CRC_PASS );
  grlc_data->func.mac_pwr_ctrl_ind.bcch_level    = bcch_level;

  for( i = 0; i < MAC_BURST_PER_BLOCK; i++ )
  {
    grlc_data->func.mac_pwr_ctrl_ind.burst_level[i] = burst_level[i];
    grlc_data->func.mac_pwr_ctrl_ind.radio_freq [i] = radio_freq[i];
  }

  PSIGNAL( hCommGRLC, MAC_PWR_CTRL_IND, &grlc_data->func.mac_pwr_ctrl_ind );

  return;
} /* maca_power_control() */

#ifdef _TARGET_

UWORD32 lst_dl_frame_nr;


/*
+------------------------------------------------------------------------------
| Function    : rlc_uplink
+------------------------------------------------------------------------------
| Description : The function rlc_uplink() is described in 921bis.doc
|
| Parameters  : see 921bis.doc
|
+------------------------------------------------------------------------------
*/
GLOBAL void rlc_uplink ( UWORD8   assignment_id,
                         UWORD8   tx_data_no,
                         UWORD32  fn,
                         UWORD8   timing_advance_value,
                         T_ul_poll_resp    * ul_poll_response,
                         T_ul_data         * ul_data, 
                         BOOL      allocation_exhausted)
{
  UWORD8 i;
  API *pollptr = (API*)ul_poll_response;
  API *outptr = (API*)ul_data;


  grlc_data->last_ul_fn = fn;
  grlc_data->ul_fn_store[(grlc_data->ul_cnt_syn%CALL_ERROR_NR_OF_ST_FN)] = fn;

  if(grlc_data->ul_cnt_syn NEQ grlc_data->ul_cnt_asyn)
  {
    grlc_data->ul_fn_errors[(grlc_data->ul_cnt_syn%CALL_ERROR_NR_OF_ST_FN)] = fn;
    grlc_data->ul_fn_errors[(grlc_data->ul_call_errors%CALL_ERROR_NR_OF_ST_FN)] = fn;
    
    /* Increment the Call_Error and wraparrond if it exceed CALL_ERROR_NR_OF_ST_FN */
    grlc_data->ul_call_errors = ((grlc_data->ul_call_errors%CALL_ERROR_NR_OF_ST_FN)+1);    
  }
  
  grlc_data->func.mac_ready_ind.nts      = tx_data_no;
  grlc_data->func.mac_ready_ind.ta_value = timing_advance_value;

  /*****copy Poll blocks**************************************************/
  if(fn EQ grlc_data->next_poll_fn)
  {
    i=0;
    while(grlc_data->ul_poll_resp[i].block_status)
    {
      pollptr[i*15] = grlc_data->ul_poll_resp[i].block_status;    
      pollptr[i*15+1] = grlc_data->ul_poll_resp[i].tn;    
      memcpy( (UBYTE*)&pollptr[i*15+2],
              (UBYTE*)grlc_data->ul_poll_resp[i].ul_block,
              12 * sizeof(API) );                               /*lint !e419*/
      pollptr[15*(i+1)] = 0x0000; /* Poll None*/
      i++;
    }
    grlc_data->ul_poll_resp[0].block_status = 0;
    grlc_data->next_poll_fn = 2;
  }
  else
  {
    pollptr[0] = 0x0000; /* Poll None*/
  }

  
  /*****copy data blocks**************************************************/
  
  outptr[0] = 0;
  if(grlc_data->ta_value NEQ 0xFF)
  {
    for(i=0;i<tx_data_no;i++)
    {
      outptr[i*29] = grlc_data->ru.ul_data[i].block_status;
      memcpy( (UBYTE*)&outptr[1+(i*29)],
              (UBYTE*)grlc_data->ru.ul_data[i].ul_block,
              28 * sizeof(API) );                           /*lint !e419*/
      outptr[(i+1)*29] = 0;
    }   
  }

  /*call control of syn part*/
  grlc_data->ul_cnt_syn++;  

  return;
} /* rlc_uplink() */
 

/*
+------------------------------------------------------------------------------
| Function    : rlc_downlink
+------------------------------------------------------------------------------
| Description : The function rlc_downlink() is described in 921bis.doc
|
| Parameters  : see 921bis.doc
|
+------------------------------------------------------------------------------
*/
GLOBAL void rlc_downlink ( UWORD8        assignment_id,
                           UWORD32       fn,
                           T_dl_struct   *data_ptr,
                           UWORD8        rlc_blocks_sent,
                           UWORD8        last_poll_response)
{
  API * in_ptr = (API*) (data_ptr);
  BOOL send_psginal;
  UBYTE i,pos = 0, call_err = 0, crc_cnt=0;


  grlc_data->last_dl_fn = lst_dl_frame_nr; 
  lst_dl_frame_nr = fn;
  grlc_data->dl_fn_store[(grlc_data->dl_cnt_syn%CALL_ERROR_NR_OF_ST_FN)] = fn-4;

  if(grlc_data->dl_cnt_syn NEQ grlc_data->dl_cnt_asyn)
  {
    grlc_data->dl_fn_errors[(grlc_data->dl_cnt_syn%CALL_ERROR_NR_OF_ST_FN)] = fn-4;
    grlc_data->dl_call_errors++;    
  }

  grlc_data->dl_fn                           = fn-4;
  grlc_data->func.dl_blocks.fn               = fn-4;
  grlc_data->func.dl_blocks.data_ptr.rx_no   = 0;
  send_psginal = FALSE;
  if(grlc_data->dl_cnt_syn EQ grlc_data->dl_cnt_asyn)
  {
    for (i = 0; i < data_ptr->rx_no; i++) 
    {
      /* 
       * In Test mode B,if there is CRC error on the payload data the MS will,
       * where required by the USF, transmit the decoded payload data. The block
       * transmitted will be a valid uplink block format.
       */
      
      if(((in_ptr[31 * i + 1] & 0x0100) EQ 0x0000) OR (grlc_data->testmode.mode EQ CGRLC_LOOP) ) 
      {
        send_psginal = TRUE;
        grlc_data->func.dl_blocks.data_ptr.rx_no++;
#ifdef TI_PS_16BIT_CPY
        api_memcpy(&grlc_data->func.dl_blocks.data_ptr.dl_data[pos],
               &in_ptr[31 * i + 1],
               31 * sizeof(API) );                                  /*lint !e420*/
#else
        memcpy(&grlc_data->func.dl_blocks.data_ptr.dl_data[pos],
               &in_ptr[31 * i + 1],
               31 * sizeof(API) );                                  /*lint !e420*/
#endif
        pos++;
      }
      else        
      { /* CRC error */
        grlc_data->nr_of_crc_errors++;
        crc_cnt++;
      }
    }
  } 
  else
  { /* call error */
    grlc_data->dl_cnt_asyn = grlc_data->dl_cnt_syn;  
    call_err = 0xFF;
    TRACE_ERROR("DL CALL ERROR");
  }

  grlc_data->dl_cnt_syn++;
  
  if(send_psginal)
  { 
    PSIGNAL(hCommGRLC,MAC_DATA_IND,  (&grlc_data->func.mac_data_ind) ); 
  }
  else
  {
    grlc_data->dl_cnt_asyn++; /*no signal to GFF, inc asynchronus counter*/ 
    if(data_ptr->rx_no NEQ  crc_cnt)
    {
      TRACE_EVENT_P3("NO DL DATA:  rx_no= %d   crc_err=%d  call_err= %d",data_ptr->rx_no, crc_cnt,call_err);
    }
  }

  /* new interface */
  grlc_data->func.mac_ready_ind.rlc_blocks_sent  = rlc_blocks_sent;
  grlc_data->func.mac_ready_ind.last_poll_resp   = last_poll_response;
  grlc_data->func.mac_ready_ind.fn               = fn;
  grlc_data->ul_fn                               = fn; 

  /* adapte uplink framenumber from downlink framenumber */
    if((grlc_data->ul_fn % 13) EQ 12)
      grlc_data->ul_fn++;
    grlc_data->ul_fn %= FN_MAX;    

  PSIGNAL(hCommGRLC, MAC_READY_IND, &(grlc_data->func.mac_ready_ind));

  return;
} /* rlc_downlink() */


#endif /* _TARGET_ */