view src/g23m-gprs/llc/llc_txl.c @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity LLC and implements all labels
|             in the SDL-documentation (TX-statemachine) that are called from
|             more than one diagram/place.
+----------------------------------------------------------------------------- 
*/ 

#ifndef LLC_TXL_C
#define LLC_TXL_C
#endif

#define ENTITY_LLC

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "cnf_llc.h"    /* to get cnf-definitions */
#include "mon_llc.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "llc.h"        /* to get the global entity definitions */

#include "llc_uitxs.h"  /* to get signal interface to UITX */
#include "llc_itxs.h"  /* to get signal interface to ITX */

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/
#ifdef TRACE_EVE

LOCAL void tx_trace_outprim_para(UBYTE sapi, T_sdu *frame)
{
  int len = BYTELEN(frame->l_buf);
  
  if( (len >= U_CTRL_MIN_OCTETS) && ((frame->buf[(frame->o_buf/8)+1] & U_FRAME_MASK) EQ U_FRAME_ID) )
  {
    switch (frame->buf[(frame->o_buf/8)+1] & 0x0F)
    {
      case U_FRAME_DM:   TRACE_2_OUT_PARA("DM s:%d len:%d", sapi, len);   break;
      case U_FRAME_DISC: TRACE_2_OUT_PARA("DISC s:%d len:%d", sapi, len); break;
      case U_FRAME_UA:   TRACE_2_OUT_PARA("UA s:%d len:%d", sapi, len);   break;
      case U_FRAME_SABM: TRACE_2_OUT_PARA("SABM s:%d len:%d", sapi, len); break;
      case U_FRAME_FRMR: TRACE_2_OUT_PARA("FRMR s:%d len:%d", sapi, len); break;
      case U_FRAME_XID:  TRACE_2_OUT_PARA("XID s:%d len:%d", sapi, len);  break;
      default:           TRACE_2_OUT_PARA("U ??? s:%d len:%d", sapi, len);break;
    }
  }
  else 
  if( (len >= UI_CTRL_MIN_OCTETS) && ((frame->buf[(frame->o_buf/8)+1] & UI_FRAME_MASK) EQ UI_FRAME_ID) )
  {
    T_FRAME_NUM nr;

    USHORT cipher = (USHORT)(frame->buf[(frame->o_buf/8)+2] >> 1) & 0x0001;

    nr  = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+1] & 0x07) << 6;
    nr |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] >> 2);

    TRACE_4_OUT_PARA("UI s:%d len:%d nr:%d c:%d", sapi, len, nr, cipher);
  }
  else
  if ((len >= I_CTRL_MIN_OCTETS) && (frame->buf[(frame->o_buf/8)+1] & I_FRAME_MASK) EQ I_FRAME_ID)
  {
    T_FRAME_NUM ns, nr;
    ns = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+1] & 0x1F) << 4;
    ns |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] >> 4);

    nr = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] & 0x07) << 6;
    nr |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+3] >> 2);

    /*
     * Determine the command of the I frame (S1 & S2 bits)
     */
    switch (frame->buf[(frame->o_buf/8)+3] & 0x03)
    {
      case I_FRAME_RR:  TRACE_4_OUT_PARA("I-RR s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns);  break;
      case I_FRAME_ACK: TRACE_4_OUT_PARA("I-ACK s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns); break;
      case I_FRAME_RNR: TRACE_4_OUT_PARA("I-RNR s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns); break;
      case I_FRAME_SACK:TRACE_4_OUT_PARA("I-SACK s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns);break;
      default:          TRACE_2_OUT_PARA("I ??? s:%d len:%d", sapi, len);                     break;
    }
  }
  else 
  if( (len >= S_CTRL_MIN_OCTETS) && (frame->buf[(frame->o_buf/8)+1] & S_FRAME_MASK) EQ S_FRAME_ID)
  {
    T_FRAME_NUM nr;

    nr = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+1] & 0x07) << 6;
    nr |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] >> 2);

    switch (frame->buf[(frame->o_buf/8)+2] & 0x03)
    {
      case I_FRAME_RR:  TRACE_3_OUT_PARA("S-RR s:%d len:%d nr:%d", sapi, len, nr);  break;
      case I_FRAME_ACK: TRACE_3_OUT_PARA("S-ACK s:%d len:%d nr:%d", sapi, len, nr); break;
      case I_FRAME_RNR: TRACE_3_OUT_PARA("S-RNR s:%d len:%d nr:%d", sapi, len, nr); break;
      case I_FRAME_SACK:TRACE_3_OUT_PARA("S-SACK s:%d len:%d nr:%d", sapi, len, nr);break;
      default:          TRACE_2_OUT_PARA("S ??? s:%d len:%d", sapi, len);           break;
    }
  }
  else
  {
    TRACE_2_OUT_PARA("??? s:%d len:%d", sapi, len);
  }
} /* tx_trace_outprim_para() */

#endif
/*==== PUBLIC FUNCTIONS =====================================================*/


/*
+------------------------------------------------------------------------------
| Function    : tx_label_s_data
+------------------------------------------------------------------------------
| Description : Describes label S_DATA
|
| Parameters  : rx_service    - indicates the service to receive a READY_IND
|                               signal, or NO_SERVICE
|               grlc_data_req  - a valid pointer to a GRLC_DATA_REQ primitive
|
+------------------------------------------------------------------------------
*/
GLOBAL void tx_label_s_data (T_SERVICE rx_service, 
                             T_GRLC_DATA_REQ *grlc_data_req)
{ 
  UBYTE sapi = grlc_data_req->sapi;

  TRACE_FUNCTION( "tx_label_s_data" );

#ifdef TRACE_EVE
  tx_trace_outprim_para (sapi, &grlc_data_req->sdu);
#endif  

  PSEND (hCommGRLC, grlc_data_req);

  SET_STATE (TX, TX_TLLI_ASSIGNED_NOT_READY);

  /*
   * Recursion possible. Therefore send ready indication after all!
   */
  if (rx_service EQ SERVICE_UITX)
  {
    SWITCH_LLC (sapi);
    sig_tx_uitx_ready_ind();
  }
  else if (rx_service EQ SERVICE_ITX)
  {
    SWITCH_LLC (sapi);
    sig_tx_itx_ready_ind();
  }

  return;
} /* tx_label_s_data() */


/*
+------------------------------------------------------------------------------
| Function    : tx_label_s_unitdata
+------------------------------------------------------------------------------
| Description : Describes label S_UNITDATA
|
| Parameters  : rx_service        - indicates the service to receive a 
|                                   READY_IND signal, or NO_SERVICE
|               grlc_unitdata_req  - a valid pointer to a GRLC_UNITDATA_REQ 
|                                   primitive
|
+------------------------------------------------------------------------------
*/
GLOBAL void tx_label_s_unitdata (T_SERVICE rx_service, 
                                 T_GRLC_UNITDATA_REQ *grlc_unitdata_req)
{ 
  UBYTE sapi = grlc_unitdata_req->sapi;

  TRACE_FUNCTION( "tx_label_s_unitdata" );

#ifdef TRACE_EVE
  tx_trace_outprim_para (sapi, &grlc_unitdata_req->sdu);
#endif  

  PSEND (hCommGRLC, grlc_unitdata_req);

  SET_STATE (TX, TX_TLLI_ASSIGNED_NOT_READY);

  /*
   * Handle ready indication at last! Recursion possible!
   */
  if (rx_service EQ SERVICE_UITX)
  {
    SWITCH_LLC (sapi);
    sig_tx_uitx_ready_ind();
  }

  return;
} /* tx_label_s_unitdata() */


/*
+------------------------------------------------------------------------------
| Function    : tx_label_s_removed
+------------------------------------------------------------------------------
| Description : Describes label S_REMOVED
|
| Parameters  : rx_service        - indicates the service to receive a 
|                                   READY_IND signal, or NO_SERVICE
|               sapi              - sapi of removed entry
|
+------------------------------------------------------------------------------
*/
GLOBAL void tx_label_s_removed (T_SERVICE rx_service, UBYTE sapi)
{ 
  TRACE_FUNCTION( "tx_label_s_removed" );

  if (rx_service EQ SERVICE_UITX)
  {
    SWITCH_LLC (sapi);
    sig_tx_uitx_ready_ind();
  }
  else if (rx_service EQ SERVICE_ITX)
  {
    SWITCH_LLC (sapi);
    sig_tx_itx_ready_ind();
  }

  return;
} /* tx_label_s_removed() */