view src/gpf/ccd/ccddata_exp.mk @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 4e78acac3d88
children
line wrap: on
line source

#----------------------------------------------------------------------------- 
#  Project :  
#  Modul   :  ccddata_exp.mk
#----------------------------------------------------------------------------- 
#  Copyright 2002 Texas Instruments Berlin, AG 
#                 All rights reserved. 
# 
#                 This file is confidential and a trade secret of Texas 
#                 Instruments Berlin, AG 
#                 The receipt of or possession of this file does not convey 
#                 any rights to reproduce or disclose its contents or to 
#                 manufacture, use, or sell anything it may describe, in 
#                 whole, or in part, without the specific written consent of 
#                 Texas Instruments Berlin, AG. 
#----------------------------------------------------------------------------- 
#  Purpose : Define exports of ccddata_dll.dll and ccddata_load.dll.
#----------------------------------------------------------------------------- 
LINK_EXPORTS=
# ccddata_pdi.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_pdi_dinfo
# ccddata_mconst.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_num_of_entities
   LINK_EXPORTS+=/EXPORT:ccddata_get_max_message_id
   LINK_EXPORTS+=/EXPORT:ccddata_get_max_bitstream_len
   LINK_EXPORTS+=/EXPORT:ccddata_get_max_mstruct_len
   LINK_EXPORTS+=/EXPORT:ccddata_mccd_symbols
# ccddata_pconst.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_max_sap_num
   LINK_EXPORTS+=/EXPORT:ccddata_get_max_primitive_id
   LINK_EXPORTS+=/EXPORT:ccddata_get_max_pstruct_len
# ccddata_ccdmtab.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_mvar
   LINK_EXPORTS+=/EXPORT:ccddata_get_spare
   LINK_EXPORTS+=/EXPORT:ccddata_get_calc
   LINK_EXPORTS+=/EXPORT:ccddata_get_mcomp
   LINK_EXPORTS+=/EXPORT:ccddata_get_melem
   LINK_EXPORTS+=/EXPORT:ccddata_get_mmtx
   LINK_EXPORTS+=/EXPORT:ccddata_get_calcidx
# ccddata_ccdptab.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_pvar
   LINK_EXPORTS+=/EXPORT:ccddata_get_pcomp
   LINK_EXPORTS+=/EXPORT:ccddata_get_pelem
   LINK_EXPORTS+=/EXPORT:ccddata_get_pmtx
# ccddata_cdemval.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_mval
# ccddata_cdemstr.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_mstr
# ccddata_cdepval.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_pval
   LINK_EXPORTS+=/EXPORT:ccddata_get_pstr
# ccd_config.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_mi_length
   LINK_EXPORTS+=/EXPORT:ccddata_get_decmsgbuffer
# ccddata_tap_priv.c
   LINK_EXPORTS+=/EXPORT:ccddata_tap_check_pd
   LINK_EXPORTS+=/EXPORT:ccddata_tap_get_pd
# ccddata_ccdent.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_ccdent
   LINK_EXPORTS+=/EXPORT:ccddata_get_entname
# ccddata_alias.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_alias
# ccddata_version.c
   LINK_EXPORTS+=/EXPORT:ccddata_get_version
   LINK_EXPORTS+=/EXPORT:ccddata_get_table_version
# ccddata_eg.c
   LINK_EXPORTS+=/EXPORT:ccddata_eg_nodes
   LINK_EXPORTS+=/EXPORT:ccddata_eg_nodenames
   LINK_EXPORTS+=/EXPORT:ccddata_eg_adjacent
   LINK_EXPORTS+=/EXPORT:ccddata_eg_saps
   LINK_EXPORTS+=/EXPORT:ccddata_eg_sapnames
   LINK_EXPORTS+=/EXPORT:ccddata_eg_comendpoints
# ccdedit.c
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_init
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_comp
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_prim_first
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_prim_next
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_msg_first
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_msg_next
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_comp_first
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_comp_next
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_symval
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_read_elem
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_write_prepare
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_write_elem
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_type
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_primcode
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_msgcode
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_is_downlink
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_comp_index
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_element_name
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)cde_get_array_kind

   OFT_EXPORTS:=$(LINK_EXPORTS)
# pdi.obj
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pdi_createDefContext
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pdi_createContext
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pdi_destroyContext
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pdi_startPrim
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pdi_getDecodeInfo
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pdi_getEntityByPD
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pdi_pd2name

# ccd.c
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_set_patch_infos
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_init
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_begin
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_end
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_codeMsg
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_codeMsgPtr
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_decodeMsg
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_decodeMsgPtr
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_exit
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_init_ccddata
# cdc_std.c
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_decodeByte
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_codeByte
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_codeLong
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_decodeLong
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_bitcopy
# ccd_err.c
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_getFirstError
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_getNextError
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_getFirstFault
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_getNextFault
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_free_faultlist
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_get_numFaults
# ccd_elem.c
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_decodeElem
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)ccd_encodeElem
# pcon.c
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pcon_init_prim_coding
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pcon_decodePrim
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pcon_codePrim
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pcon_init_ccddata
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pcon_make_filter
   LINK_EXPORTS+=/EXPORT:$(DLL_PREFIX)pcon_filter_decode_prim