view src/gpf/ccd/t30_ident.c @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : t30_ident.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for T30_IDENT elements 
+----------------------------------------------------------------------------- 
*/ 


/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                MODULE  : CCD                  |
| STATE   : code                      ROUTINE : cdc_t30_ident_decode |
+--------------------------------------------------------------------+

  PURPOSE :

*/

SHORT cdc_t30_ident_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
  ULONG               max_rep;
  BOOL                is_variable;
  UBYTE               digBuffer[30], bit, digT30, digASCII;
  UBYTE               *addr_c_xxx;
  int                 i, repeat;
  ULONG               cix_ref, num_prolog_steps, prolog_step_ref;
  register UBYTE      *ident;

#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_t30_ident_decode()");
  #else
  TRACE_CCD (globs, "cdc_t30_ident_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif

  cix_ref = melem[e_ref].calcIdxRef;
  num_prolog_steps = calcidx[cix_ref].numPrologSteps;
  prolog_step_ref  = calcidx[cix_ref].prologStepRef;

  /*
   * if this element is conditional, check the condition
   */
  if (calcidx[cix_ref].numCondCalcs NEQ 0
  AND ! ccd_conditionOK (e_ref, globs))
    return 1;

  /*
   * if this element have a defined Prolog
   * we have to process it before decoding the bitstream
   */
  if (num_prolog_steps)
  {
    ccd_performOperations (num_prolog_steps, prolog_step_ref, globs);
  }
  
  /*
   * if this element is repeatable, and the number of
   * repeats depends on another element, calculate the repeater
   */

  if (melem[e_ref].repType NEQ ' ')
  {
    ULONG rep; 
    is_variable = ccd_calculateRep (e_ref, &rep, &max_rep, globs);
    repeat = rep;
  }
  else
  {
    repeat = 1;
    is_variable = FALSE;
  }
  
  /*
   * setup the offset into the C-structure for this element
   */
  globs->pstructOffs = melem[e_ref].structOffs;

  if (melem[e_ref].optional)
  {
    /*
     * for optional elements set the valid-flag
     */
    globs->pstruct[globs->pstructOffs++] = (UBYTE) TRUE;
  }


  if (is_variable)
  {
    /*
     * for variable sized elements store the min-value
     * as counter into the C-Structure (c_xxx).
     */
    addr_c_xxx = (UBYTE *) (globs->pstruct + globs->pstructOffs++);
    if (max_rep > 255)
      globs->pstructOffs++;
  }
  else
    addr_c_xxx = NULL;

  /*
   * calculate the address of the Most Significant Digit 
   * of the T30_IDENT element in the C-struct
   */
  ident = (UBYTE *) (globs->pstruct + globs->pstructOffs);

  
  /*
   * now read 'repeat' T30_IDENT digits and convert them
   * into ASCII.
   */
  i=0;

  while (!bf_endOfBitstream(globs) AND i<repeat)
  {
    digT30 = bf_decodeByteNumber (8, globs);
#ifdef DEBUG_CCD
    TRACE_CCD (globs, "T30 digit (%X) read", digT30);
#endif
    /*
     * conversion T30->ASCII
     * reverse the bitorder of each byte
     */
    digASCII = 0;

    for (bit = 0; bit < 8; bit++)
    {
      digASCII <<= 1;
      digASCII |= (digT30 & 0x01);
      digT30   >>= 1;
    }

    digBuffer[i] = digASCII;
#ifdef DEBUG_CCD
    TRACE_CCD (globs, "  converted to %X = %c", digBuffer[i], digBuffer[i]);
#endif
    i++;
  }

  /*
   * eleminate leading spaces
   */
  while (i > 0 AND digBuffer[i-1] EQ ' ')
  {
#ifdef DEBUG_CCD
    TRACE_CCD (globs, "eliminating leading space");
#endif
    i--;
  }

  repeat = i;


  if (addr_c_xxx NEQ NULL)
  {
    /*
     * store the number of digits into the 
     * c_xxx variable if there is one.
     */
    if (max_rep > 65535)
    {
      ULONG *addr_c_xxx_u32;
      addr_c_xxx_u32 = (ULONG *)addr_c_xxx;
      *addr_c_xxx_u32 = (ULONG) repeat;
#ifdef DEBUG_CCD
      TRACE_CCD (globs, "storing %d into counter var at (%lx)",
               repeat, addr_c_xxx_u32);
#endif
    }
    else if (max_rep > 255)
    {
      USHORT *addr_c_xxx_u16;
      addr_c_xxx_u16 = (USHORT *)addr_c_xxx;
      *addr_c_xxx_u16 = (USHORT) repeat;
#ifdef DEBUG_CCD
      TRACE_CCD (globs, "storing %d into counter var at (%lx)",
               repeat, addr_c_xxx_u16);
#endif
    }
    else
    {
      *addr_c_xxx = (UBYTE) repeat;
#ifdef DEBUG_CCD
      TRACE_CCD (globs, "storing %d into counter var at (%lx)",
               repeat,
               addr_c_xxx);
#endif
    }
  }

  /*
   * store the digits in reverse order
   * into the C-Structure variable
   */
#ifdef DEBUG_CCD
  TRACE_CCD (globs, "storing %d digits into cstruct at (%lx)",
             repeat,
             ident);
#endif

  for (i=0; i<repeat; i++)
    ident[i] = digBuffer[(repeat-1)-i];

  return 1;
}
#endif /* !RUN_INT_RAM */

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)                MODULE  : CCD                  |
| STATE   : code                      ROUTINE : cdc_t30_ident_encode |
+--------------------------------------------------------------------+

  PURPOSE : 

*/


SHORT cdc_t30_ident_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
  ULONG               repeat, max_rep;
  UBYTE               digBuffer[30], bit, digT30, digASCII;
  ULONG               i;
  ULONG               cix_ref, num_prolog_steps, prolog_step_ref;
  register UBYTE     *ident;

#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_t30_ident_encode()");
  #else
  TRACE_CCD (globs, "cdc_t30_ident_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));
  #endif
#endif

  cix_ref = melem[e_ref].calcIdxRef;
  num_prolog_steps = calcidx[cix_ref].numPrologSteps;
  prolog_step_ref  = calcidx[cix_ref].prologStepRef;

  /*
   * if this element is conditional, check the condition
   */
  if (calcidx[cix_ref].numCondCalcs NEQ 0
  AND ! ccd_conditionOK (e_ref, globs))
    return 1;

  /*
   * if this element have a defined Prolog
   * we have to process it before encoding
   */
  if (num_prolog_steps)
  {
    ccd_performOperations (num_prolog_steps, prolog_step_ref, globs);
  }
  
  /*
   * setup the offset into the C-structure for this element
   */
  globs->pstructOffs = melem[e_ref].structOffs;

  if (melem[e_ref].optional)
  {
    /*
     * for optional elements check the valid-flag
     */
    if (globs->pstruct[globs->pstructOffs++] == FALSE)
    {
      return 1;
    }
#ifdef DEBUG_CCD
    else if (globs->pstruct [melem[e_ref].structOffs] != TRUE)
    {
      TRACE_CCD (globs, "Ambiguous value for valid flag!\n...assumed 1 for ccdID=%d",
                 e_ref);
    }
#endif
  }

  /* 
   * if this element is repeatable, and the number of
   * repeats depends on another element, calculate the repeater
   */
  if (melem[e_ref].repType EQ 'v' OR melem[e_ref].repType EQ 'i')
  {
    /*
     * for variable sized elements read the amount
     * of repeats out of the C-Structure (c_xxx).
     * If the number of repeats given by the C-Structure 
     * exceeds the allowed value (maxRepeat) CCD gives a warning!
     */
    if (melem[e_ref].maxRepeat > 255)
    {
      ULONG count = (ULONG) (* (USHORT *)(globs->pstruct + globs->pstructOffs++));
      repeat = MINIMUM (count, (ULONG) melem[e_ref].maxRepeat);
      if (repeat < count) 
        ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, 
                         (USHORT) e_ref, globs->pstruct + globs->pstructOffs);
    }
    else
    {
      repeat = (ULONG) MINIMUM (globs->pstruct[globs->pstructOffs], 
                                melem[e_ref].maxRepeat);
      if ( repeat < (ULONG) (globs->pstruct[globs->pstructOffs]) )
        ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, 
                         (USHORT) e_ref, globs->pstruct + globs->pstructOffs);
    }
    globs->pstructOffs++;
    max_rep = (ULONG) melem[e_ref].maxRepeat;
  }
  else
    if (melem[e_ref].repType EQ 'c')
    {
      repeat = (ULONG) melem[e_ref].maxRepeat;
      max_rep = (ULONG) melem[e_ref].maxRepeat;
    }
    else
    {
      repeat = 1; 
      max_rep = 1;
    }

  /* 
   * setup the read pointer to the byte array that contain
   * the ident number.
   */
  ident = (UBYTE *) (globs->pstruct + globs->pstructOffs);

  /*
   * read the digits in reverse order out of the C-Structure variable.
   * (filled up with blanks to the maxRepeat)
   */

  i=0;

  while (i < max_rep)
  {
    if (i < repeat)
      digBuffer[i] = ident[(repeat-1)-i];
    else
    {
#ifdef DEBUG_CCD
      TRACE_CCD (globs, "appending space char");
#endif
      digBuffer[i] = ' ';
    }
    i++;
  }

  /*
   * now read 'repeat' T30_IDENT digits and convert them
   * into ASCII.
   */
  i=0;

  while (i < max_rep)
  {
    digASCII = digBuffer[i];

#ifdef DEBUG_CCD
    TRACE_CCD (globs, "ASCII digit (%X) = %c ", (USHORT) digASCII, digASCII);
#endif
    /*
     * conversion ASCII->T30
     * reverse the bitorder of each byte
     */
    digT30 = 0;

    for (bit = 0; bit < 8; bit++)
    {
      digT30   <<= 1;
      digT30   |= (digASCII & 0x01);
      digASCII >>= 1;
    }

#ifdef DEBUG_CCD
    TRACE_CCD (globs, "  converted to %X", (USHORT) digT30);
#endif
    bf_codeByteNumber (8, digT30, globs);

    i++;
  }
  
  return 1;
}
#endif /* !RUN_INT_RAM */