FreeCalypso > hg > fc-tourmaline
view src/gpf/frame/makefile @ 268:f2e52cab0a73
abb_inth.c: check all interrupt causes, not just one
The original code used if - else if - else if etc constructs, thus
the first detected interrupt was the only one handled. However,
Iota ITSTATREG is a clear-on-read register, thus if we only handle
the first detected interrupt and skip checking the others, then the
other interrupts will be lost, if more than one interrupt happened
to occur in one ABB interrupt handling cycle - a form of rare race
condition. Change the code to check all interrupts that were read
in this cycle.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 13 Jun 2021 18:17:53 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
####################### Makefile for GNU make ##################### # # makefile with rules for all different variations of Frame # # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # # targets: # # os_layer (objects) # frameobjs Frame + OS-Layer + TST (objects) # ../lib/frame.lib or ../lib/frame.dll # ../lib/ofe.lib or ../lib/ofe.dll Frame + OS_LAYER + TST + OFE # clean delete object files # ####################################################################### VPATH=$(OS_LAYER_SRC) $(OBJDIR) OWN_MAKELEVEL=0 GPF:=$(subst \,/,$(GPF)) ifdef TOOL_CHOICE TS:=/ts$(TOOL_CHOICE) tsTail :=_ts$(TOOL_CHOICE) else TS:= endif ifdef PATH_CC_1_22E PATH:=$(PATH_CC_1_22E);$(PATH) C_DIR:=$(PATH_CC_1_22E) endif ifeq ($(TOOL_CHOICE), 3) COPTS= --align_structs=4 -pden -q ifndef PATH_CC_2_54 PATH_CC_2_54=C:/Dvpt_tools/Codegen/TMS4701x_2.54 C_DIR=PATH_CC_2_54 endif Path:=$(PATH_CC_2_54)/bin;$(Path) INCLUDES += -I"$(PATH_CC_2_54)/include" endif ifeq ($(TOOL_CHOICE), 5) COPTS= --align_structs=4 -pden -q ifndef PATH_CC_2_55 PATH_CC_2_55=C:\Dvpt_tools\Codegen\TMS4701x_2.55 # C_DIR=PATH_CC_2_55 endif Path:=$(PATH_CC_2_55)/bin;$(Path) INCLUDES += -I"$(PATH_CC_2_55)/include" endif ifeq ($(TOOL_CHOICE), 6) # --code_state=16 => -mt # --endian=little => -me # what is -ml? COPTS= -mv=5e --abi=ti_arm9_abi COPTS+= -pden -pdv -mf -ms -qq -disable_branch_chaining -pi ifndef PATH_CC_4_11 PATH_CC_4_11=C:\Dvpt_tools\Codegen\TMS4701x_4.11 # C_DIR=PATH_CC_4_11 endif Path:=$(PATH_CC_4_11)/bin;$(Path) INCLUDES += -I"$(PATH_CC_4_11)/include" endif #*==== PARAMETERS-ANALYSIS =========================================*# ifeq ($(FLOAT), 1) REPLACE = -replace endif ifeq ($(OS_ONLY), 1) OSAL:=/os else OSAL:= endif ifeq ($(TARGET), nuc) ifeq ($(RUN_FLASH), 1) SECTION:=/fl endif ifeq ($(RUN_INT_RAM), 1) SECTION:=/ir endif else SECTION:= endif ifeq ($(TARGET), linuxpc) ESF=1 endif ifeq ($(TARGET), linuxarm) ESF=1 endif ifeq ($(TARGET), solsparc) ESF=1 endif ifeq ($(ESF), 1) ES:=/esf else ES:= endif ifeq ($(NO_LINT), 1) USE_LINT:=1 else USE_LINT:=0 endif ifeq "$(CLEARCASE_PRIMARY_GROUP)" "" CLRCAS=0 else ifeq "$(IN_VOB)" "FALSE" CLRCAS=0 else CLRCAS=1 endif endif ifeq ($(CLRCAS), 1) CHECKOUT = -cleartool co -nc CHECKIN = -cleartool ci -nc else CHECKOUT = attrib -r CHECKIN = attrib +r endif # for created object files ifeq ($(TARGET), nuc) OBJDIR=obj/$(TARGET)/$(PLATFORM)$(DB)$(OSAL)$(PS)$(ES)$(SECTION)$(OPT)$(TS) NUC_OBJDIR=e:/nucleus/v1.1/os/asm TIF_OBJDIR=../tst/$(OBJDIR) MISC_OBJDIR=../misc/$(OBJDIR) else OBJDIR=obj/$(TARGET)$(DB)$(OSAL)$(PS)$(ES) endif # for stack calculation GAWK=../tools/bin/gawk.exe AWK_PROG=../BIN/cg$(tTail).awk # Lint LINT=lint-nt.exe LINT_INC=-i/gpf/template/lint/ LINT_OPT_FILE=/gpf/template/lint/options.lnt # general directories GPFDIR=.. INCDIR=../inc ifndef TI_DIR TI_DIR=/chipsetsw/ endif override TI_DIR:=$(subst \,/,$(TI_DIR)) # for created libraries ifeq ($(TARGET), win32) LIBDIR=../LIB/WIN32$(DEBUGDIR) BINDIR=../BIN$(DEBUGDIR) else LIBDIR:=../LIB endif OS_LAYER_SRC=./$(TARGET) FRAME_SRC=./ #-------------------------general exported include files INC_FILES=Vsi.h os.h typedefs.h drvconf.h STDDEFS.H gdi.h comp.h Header.h \ ofe.h PEI.H poolconf.h TOK.H $(LIBDIR)/FrmConst.h #-------------------------Suffixes for the name of the output file #---------e.g. frame_tr_rt_po_db.lib ifeq ($(ESF), 1) esfTail :=_esf else esfTail := endif ifeq ($(RUN_FLASH), 1) flTail :=_fl else flTail:= endif ifeq ($(RUN_INT_RAM), 1) irTail :=_ir else irTail:= endif ifeq ($(TARGET), nuc) ifeq ($(PLATFORM), arm7) tTail :=_na7 else ifeq ($(PLATFORM), arm9) tTail :=_na9 else ifeq ($(PLATFORM), pc) tTail :=_npc endif endif endif else ifeq ($(TARGET), nuc_ARM) tTail :=_ar else ifeq ($(TARGET), win32) tTail := else ifeq ($(TARGET), psos) tTail :=_po else ifeq ($(TARGET), vxworks) tTail :=_vx ifeq ($(TOOL), gnu) tlTail :=_gn else tlTail :=_di endif ifeq ($(CPU), PPC603) cpTail :=_pp endif else ifeq ($(TARGET), linuxpc) tTail :=_lpc OSENV=sus NO_LINT=1 else ifeq ($(TARGET), rtlpc) tTail :=_rlp OSENV=sus NO_LINT=1 RTL_VERSION=2.0 RTL_DIR=/opt/rtldk-$(RTL_VERSION)/rtlinuxpro include $(RTL_DIR)/rtl.mk else ifeq ($(TARGET), linuxarm) tTail :=_la9 OSENV=sus NO_LINT=1 else ifeq ($(TARGET), solsparc) tTail :=_ssp OSENV=sus NO_LINT=1 endif endif endif endif endif endif endif endif endif ifeq ($(DEBUG), 1) DB=/db ifeq ($(TARGET), win32) DEBUGDIR=/debug dbTail := else dbTail :=_db endif else dbTail:= DB= endif ifeq ($(OS_ONLY), 1) LIBNAME = os else LIBNAME = frame endif ifeq ($(NO_OPT), 1) DISABLE_OPT:=1 OPT:=/no noTail:=_no else DISABLE_OPT:=0 OPT:= noTail:= endif #---------- shell calls RM = -rm -rf ifeq ($(OSENV), sus) MKDIR = mkdir else MKDIR = gmkdir endif COPY = cp MOVE = mv COPTS_FILE = CLEARTOOL = cleartool ECHO = @echo #-------------------------Suffixes for the name of the output files #--------frame.lib suffixes ifeq ($(MEMSUPER), 2) msTail :=_ps PS=/ps endif ifeq ($(MEMSUPER), 1) msTail :=_pm endif ifeq ($(MEMSUPER), 0) msTail:= PS= endif XXX:=$(tTail)$(tlTail)$(cpTail)$(dbTail)$(msTail)$(esfTail)$(irTail)$(flTail)$(noTail)$(tsTail) #-------------------------Suffixes for the name of the output files _OS_LAYER= os_pro.$(OBJTAIL) os_com.$(OBJTAIL) os_tim.$(OBJTAIL) os_sem.$(OBJTAIL) os_mis.$(OBJTAIL) os_mem.$(OBJTAIL) $(OS_ISR) $(OS_PART) $(OSDRV) ifeq ($(OS_ONLY), 1) _FRAMEOBJS = $(ESF_FUNC) else _FRAMEOBJS = frame.$(OBJTAIL) vsi_sem.$(OBJTAIL) vsi_com.$(OBJTAIL) vsi_mem.$(OBJTAIL) vsi_tim.$(OBJTAIL)\ vsi_mis.$(OBJTAIL) vsi_drv.$(OBJTAIL) vsi_trc.$(OBJTAIL) vsi_pro.$(OBJTAIL) xalert.$(OBJTAIL)\ route.$(OBJTAIL) prf_func.$(OBJTAIL) frm_ext.$(OBJTAIL) $(ESF_FUNC) endif _TIFOBJS = $(TIF_OBJDIR)/tst_pei.$(OBJTAIL) $(TIF_OBJDIR)/tstdriver.$(OBJTAIL) $(TIF_OBJDIR)/tif.$(OBJTAIL)\ $(TIF_OBJDIR)/tr.$(OBJTAIL) $(TIF_OBJDIR)/titrc.$(OBJTAIL) _MISCOBJS = $(MISC_OBJDIR)/tok.$(OBJTAIL) $(MISC_OBJDIR)/tools.$(OBJTAIL) _NUCOBJS = $(NUC_OBJDIR)/inc.$(OBJTAIL) $(NUC_OBJDIR)/dmi.$(OBJTAIL) $(NUC_OBJDIR)/evi.$(OBJTAIL) $(NUC_OBJDIR)/pmi.$(OBJTAIL) $(NUC_OBJDIR)/mbi.$(OBJTAIL) $(NUC_OBJDIR)/ioi.$(OBJTAIL) $(NUC_OBJDIR)/tmi.$(OBJTAIL) \ $(NUC_OBJDIR)/qui.$(OBJTAIL) $(NUC_OBJDIR)/hii.$(OBJTAIL) $(NUC_OBJDIR)/eri.$(OBJTAIL) $(NUC_OBJDIR)/pii.$(OBJTAIL) $(NUC_OBJDIR)/smi.$(OBJTAIL) $(NUC_OBJDIR)/tci.$(OBJTAIL) $(NUC_OBJDIR)/erc.$(OBJTAIL) \ $(NUC_OBJDIR)/mbd.$(OBJTAIL) $(NUC_OBJDIR)/iod.$(OBJTAIL) $(NUC_OBJDIR)/hid.$(OBJTAIL) $(NUC_OBJDIR)/pid.$(OBJTAIL) $(NUC_OBJDIR)/qud.$(OBJTAIL) $(NUC_OBJDIR)/erd.$(OBJTAIL) $(NUC_OBJDIR)/lic.$(OBJTAIL) \ $(NUC_OBJDIR)/rld.$(OBJTAIL) $(NUC_OBJDIR)/lid.$(OBJTAIL) $(NUC_OBJDIR)/ioc.$(OBJTAIL) $(NUC_OBJDIR)/ioce.$(OBJTAIL) $(NUC_OBJDIR)/iof.$(OBJTAIL) $(NUC_OBJDIR)/quc.$(OBJTAIL) $(NUC_OBJDIR)/quce.$(OBJTAIL) \ $(NUC_OBJDIR)/quf.$(OBJTAIL) $(NUC_OBJDIR)/qus.$(OBJTAIL) $(NUC_OBJDIR)/quse.$(OBJTAIL) $(NUC_OBJDIR)/pic.$(OBJTAIL) $(NUC_OBJDIR)/pice.$(OBJTAIL) $(NUC_OBJDIR)/pif.$(OBJTAIL) $(NUC_OBJDIR)/pis.$(OBJTAIL) \ $(NUC_OBJDIR)/pise.$(OBJTAIL) $(NUC_OBJDIR)/mbc.$(OBJTAIL) $(NUC_OBJDIR)/mbce.$(OBJTAIL) $(NUC_OBJDIR)/mbf.$(OBJTAIL) $(NUC_OBJDIR)/mbs.$(OBJTAIL) $(NUC_OBJDIR)/mbse.$(OBJTAIL) $(NUC_OBJDIR)/sms.$(OBJTAIL) \ $(NUC_OBJDIR)/smse.$(OBJTAIL) $(NUC_OBJDIR)/tcs.$(OBJTAIL) $(NUC_OBJDIR)/tcse.$(OBJTAIL) $(NUC_OBJDIR)/evf.$(OBJTAIL) $(NUC_OBJDIR)/hic.$(OBJTAIL) $(NUC_OBJDIR)/dmc.$(OBJTAIL) $(NUC_OBJDIR)/dmce.$(OBJTAIL) \ $(NUC_OBJDIR)/dmd.$(OBJTAIL) $(NUC_OBJDIR)/dmf.$(OBJTAIL) $(NUC_OBJDIR)/evc.$(OBJTAIL) $(NUC_OBJDIR)/evce.$(OBJTAIL) $(NUC_OBJDIR)/evd.$(OBJTAIL) $(NUC_OBJDIR)/pmf.$(OBJTAIL) $(NUC_OBJDIR)/smf.$(OBJTAIL) \ $(NUC_OBJDIR)/tcf.$(OBJTAIL) $(NUC_OBJDIR)/tmf.$(OBJTAIL) $(NUC_OBJDIR)/rlc.$(OBJTAIL) $(NUC_OBJDIR)/csc.$(OBJTAIL) $(NUC_OBJDIR)/tmc.$(OBJTAIL) $(NUC_OBJDIR)/pmc.$(OBJTAIL) $(NUC_OBJDIR)/pmce.$(OBJTAIL) \ $(NUC_OBJDIR)/pmd.$(OBJTAIL) $(NUC_OBJDIR)/smc.$(OBJTAIL) $(NUC_OBJDIR)/smce.$(OBJTAIL) $(NUC_OBJDIR)/smd.$(OBJTAIL) $(NUC_OBJDIR)/tcc.$(OBJTAIL) $(NUC_OBJDIR)/tcce.$(OBJTAIL) $(NUC_OBJDIR)/tcd.$(OBJTAIL) \ $(NUC_OBJDIR)/tms.$(OBJTAIL) $(NUC_OBJDIR)/tmse.$(OBJTAIL) $(NUC_OBJDIR)/tmd.$(OBJTAIL) ifeq ($(MEMSUPER), 2) _FRAMEOBJS += vsi_ppm.$(OBJTAIL) endif _FRAMEOBJS += frame_version.$(OBJTAIL) #----------------------------------- Special settings for each target #----------Nucleus ifeq ($(TARGET), nuc) ifeq ($(PLATFORM), arm7) OSDRV = os_drv.$(OBJTAIL) OS_ISR = os_isr.$(OBJTAIL) OS_LAYER_SRC:=./nuc/ _OS_LAYER += os_evt.$(OBJTAIL) ifeq ($(TOOL_CHOICE), ) COPTS+= -mw -x -pw2 -q -o endif CC=cl470 COPTS+= -me -mt ifeq ($(DEBUG), 1) ifeq ($(TOOL_CHOICE), ) COPTS += -g else COPTS += -gt endif COPTS += -mn DEFINES += -dNU_DEBUG endif ifeq ($(ASM_ONLY), 1) ASMOBJS = $(_NUCOBJS) $(_TIFOBJS) $(_MISCOBJS) COPTS+= -q -n -x0 -fs $(OBJDIR) MKLIB = $(GAWK) -f $(AWK_PROG) > $(FRAME_LIB) OBJTAIL = asm FRAME_LIB = $(OBJDIR)/frame$(XXX).pa else LIBEXT = lib OBJTAIL = obj FRAME_LIB=$(LIBDIR)/$(LIBNAME)$(XXX).$(LIBEXT) LINT_OPT_FILE += nucleus.lnt LINT_OPTS = $(LINT_INC) -I"$(subst \,/,$(C_DIR))" -u $(LINT_OPT_FILE) MKLIB = ar470 $(LFLAGS) endif ifeq ($(OS_ONLY), 1) DEFINES += -dFF_OS_ONLY else DEFINES += -d_FF_RV_EXIST_ COPTS+= -o3 endif ifeq ($(POOL_SPLIT), 1) DEFINES += -dFF_POOL_SPLIT endif ifeq ($(RUN_INT_RAM), 1) COPTS += -dRUN_INT_RAM endif ifeq ($(RUN_FLASH), 1) COPTS += -dRUN_FLASH endif COPTS += -fr $(OBJDIR) -c ifeq ($(MEMSUPER), 2) DEFINES += -dMEMORY_SUPERVISION -dOPTIMIZE_POOL endif ifeq ($(MEMSUPER), 1) DEFINES += -dMEMORY_SUPERVISION endif INCLUDES+=-I"." -I"..\FRAME\NUC" -I"..\INC\NUC" -I"..\INC\NUC\ARM7" -I"..\INC" \ -I"..\TST" -I"$(TI_DIR)\Riviera" -I"$(TI_DIR)\Riviera\rv" -I"$(TI_DIR)\Services\dar" \ -I"$(TI_DIR)\Riviera\rvm" -I"$(TI_DIR)\System" -I"$(TI_DIR)\Services" \ -I"$(TI_DIR)\Drivers\drv_app" -I"$(TI_DIR)\Drivers\drv_app\ffs" \ -I"$(TI_DIR)\System\deps_objs\gprs_dsample_amr_nw" -I"$(TI_DIR)\System\deps_objs\gprs_dsample_amr_nw\config" DEFINES += -d_TARGET_ -d_NUCLEUS_ COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES) INCLUDELIST=$(INCLUDES) DEFINELIST=$(subst -d,-D,$(DEFINES)) COPTS_FILE= COMMLFLAGS = -rq $@ # only one command:a LFLAGS=$(COMMLFLAGS) LIBEXT=lib clean: @$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)$(OSAL)$(PS)$(SECTION)$(TS)/*.$(OBJTAIL) @$(RM) $(FRAME_LIB) endif endif # nucleus & arm7 #----------Nucleus ifeq ($(TARGET), nuc) ifeq ($(PLATFORM), arm9) OSDRV = os_drv.$(OBJTAIL) OS_ISR = os_isr.$(OBJTAIL) OS_LAYER_SRC:=./nuc/ _OS_LAYER += os_evt.$(OBJTAIL) CC=cl470 COPTS+= -me -mt ifneq ($(DISABLE_OPT), 1) ifeq ($(TOOL_CHOICE), 6) COPTS+= -O=2 else COPTS+= -o endif endif ifeq ($(DEBUG), 1) ifeq ($(TOOL_CHOICE), 6) COPTS += --symdebug:coff else # toolset 3 and 5 COPTS += -gt endif COPTS += -mn DEFINES += -dNU_DEBUG endif LINT_OPT_FILE += nucleus.lnt LINT_OPTS = $(LINT_INC) -I"$(subst \,/,$(C_DIR))" -u $(LINT_OPT_FILE) ifeq ($(OS_ONLY), 1) DEFINES += -dFF_OS_ONLY endif ifeq ($(ESF), 1) ESF_FUNC = esf_func.$(OBJTAIL) DEFINES += -d_ESF_SUPPORT_ endif ifeq ($(RUN_INT_RAM), 1) COPTS += -dRUN_INT_RAM endif ifeq ($(RUN_FLASH), 1) COPTS += -dRUN_FLASH endif COPTS += -fr $(OBJDIR) -c ifeq ($(MEMSUPER), 2) DEFINES += -dMEMORY_SUPERVISION -dOPTIMIZE_POOL endif ifeq ($(MEMSUPER), 1) DEFINES += -dMEMORY_SUPERVISION endif INCLUDES+=-I"." -I"..\FRAME\NUC" -I"..\INC\NUC" -I"..\INC" -I"..\TST" MKLIB=ar470 $(LFLAGS) INCLUDES += -I"..\inc\NUC\ARM9" DEFINES += -d_TARGET_ -d_NUCLEUS_ COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES) INCLUDELIST=$(INCLUDES) DEFINELIST=$(subst -d,-D,$(DEFINES)) COPTS_FILE= COMMLFLAGS = -rq $@ # only one command:a LFLAGS=$(COMMLFLAGS) LIBEXT=lib OBJTAIL=obj FRAME_LIB=$(LIBDIR)/$(LIBNAME)$(XXX).$(LIBEXT) clean: @$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)$(OSAL)$(PS)$(ES)$(SECTION)$(OPT)$(TS)/*.$(OBJTAIL) @$(RM) $(FRAME_LIB) endif endif # nucleus & arm9 #----------------------------------- Special settings for each target #----------Nucleus_ARM ifeq ($(TARGET), nuc_ARM) OSDRV = os_drv.$(OBJTAIL) OS_LAYER_SRC:=./nuc/ _OS_LAYER += os_evt.$(OBJTAIL) CC=perl "\G23M\Condat\INT\BIN\gti_compile.pl" COPTS= -me -mt -pw2 -q -x -mw -o # from condat_env.mak and os.mak for nucleus.lib ifeq ($(DEBUG), 1) COPTS += -g -mn DEFINES += -dNU_DEBUG endif COPTS += -fr $(OBJDIR) -fo $(OBJDIR)/$@ -c ifeq ($(MEMSUPER), 2) DEFINES += -dMEMORY_SUPERVISION -dOPTIMIZE_POOL endif ifeq ($(MEMSUPER), 1) DEFINES += -dMEMORY_SUPERVISION endif INCLUDES+=-I"..\FRAME\NUC" -I"..\inc\NUC" -I"..\inc\NUC\ARM7" -I"..\inc" -I"..\TST" DEFINES += -d_TARGET_ -d_NUCLEUS_ COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES) INCLUDELIST=$(INCLUDES) DEFINELIST=$(subst -d,-D,$(DEFINES)) COPTS_FILE= COMMLFLAGS = -rq $@ # only one command:a LFLAGS=$(COMMLFLAGS) MKLIB=perl "\G23M\Condat\INT\BIN\gti_archive.pl" $(LFLAGS) LIBEXT=lib OBJTAIL=obj FRAME_LIB=$(LIBDIR)/$(LIBNAME)$(XXX).$(LIBEXT) clean: @$(RM) obj/$(TARGET)$(DB)$(PS)/*.$(OBJTAIL) @$(RM) $(FRAME_LIB) endif # target: Nucleus_ARM #----------------------------------- Special settings for each target #----------NucleusWin ifeq ($(TARGET), nuc) ifeq ($(PLATFORM), pc) OS_ISR = os_isr.$(OBJTAIL) _OS_LAYER += os_ctb.obj _OS_LAYER += os_evt.$(OBJTAIL) OS_LAYER_SRC:=./nuc/ CC=cl COPTS = /c /nologo /W3 /GX /Zp1 /GZ INCLUDES += -I"." -I"..\inc\NUC" -I"..\inc\NUC\PC" -I"..\inc" -I"..\TST" LINT_OPT_FILE += co-msc50.lnt LINT_OPTS = $(LINT_INC) -D_WIN32 -D_M_IX86 -I"NUC" -u $(LINT_OPT_FILE) ifeq ($(DEBUG), 1) COPTS += /MD /DEBUG /Z7 DEFINES += -D"_DEBUG" -D"NU_DEBUG" else COPTS += /MT endif COPTS += /FR"..\temp\nucwin" /Fd"..\temp\nucwin" /Fo./$(OBJDIR)/ ifeq ($(OS_ONLY), 1) DEFINES += -D"FF_OS_ONLY" endif ifeq ($(MEMSUPER), 2) DEFINES += -D"MEMORY_SUPERVISION" -D"OPTIMIZE_POOL" endif ifeq ($(MEMSUPER), 1) DEFINES += -D"MEMORY_SUPERVISION" endif ifeq ($(POOL_SPLIT), 1) DEFINES += -D"FF_POOL_SPLIT" endif DEFINES += -D"_NUCLEUS_" COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES) COPTS_FILE = INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) DEFINELIST=$(subst /D ,-D,$(DEFINES)) COMMLFLAGS = /nologo /subsystem:console /machine:I386 LFLAGS=$(COMMLFLAGS) #/debug?? MKLIB=LIB /out:$@ $(LFLAGS) LIBEXT=lib OBJTAIL=obj FRAME_LIB=$(LIBDIR)/$(LIBNAME)$(XXX).$(LIBEXT) clean: @$(RM) obj/$(TARGET)/$(PLATFORM)$(DB)$(OSAL)$(PS)/*.$(OBJTAIL) @$(RM) $(FRAME_LIB) endif endif # nucleus && pc ifeq ($(OSENV), sus) #_OS_LAYER += os_ctb.o OS_ISR = os_isr.$(OBJTAIL) ESF_FUNC = esf_func.$(OBJTAIL) OS_LAYER_SRC:=./$(OSENV)/ COPTS = -c -o$(OBJDIR)/$@ INCLUDES += -I. -I../inc/$(OSENV) -I../inc -I../TST -I$(OS_LAYER_SRC) ifeq ($(TARGET), linuxtool) DEFINES += -D_TOOLS_ endif DEFINES += -DPURE_USER_MODE ifeq ($(OSL_LOG), 1) DEFINES += -DOSL_OSL_LOG endif ifeq ($(OS_ONLY), 1) DEFINES += -DFF_OS_ONLY endif ifeq ($(DEBUG), 1) COPTS += -g DEFINES += -DOSL_DEBUG endif ifeq ($(MEMSUPER), 2) DEFINES += -DMEMORY_SUPERVISION -DOPTIMIZE_POOL endif ifeq ($(MEMSUPER), 1) DEFINES += -DMEMORY_SUPERVISION endif ifeq ($(TARGET), rtlpc) COPTSNF = $(CFLAGS) MKLIB= i386-linux-ar ruv $@ RANLIB= i386-linux-ranlib DEFINES += -D_RT_LINUX_ else ifeq ($(TARGET), linuxarm) CC=arm-linux-gcc MKLIB= arm-linux-ar ruv $@ RANLIB= arm-linux-ranlib DEFINES += -D_TARGET -D_LINUX_ -D_ESF_SUPPORT_ else ifeq ($(TARGET), solsparc) CC=gcc MKLIB= ar ruv $@ RANLIB= ranlib DEFINES += -D_SOLARIS_ -D_LINUX_ -D_ESF_SUPPORT_ else CC=gcc MKLIB= ar ruv $@ RANLIB= ranlib DEFINES += -D_LINUX_ -D_ESF_SUPPORT_ endif endif endif COPTSNF += $(COPTS) $(DEFINES) $(INCLUDES) COPTS_FILE = INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) DEFINELIST=$(subst /D ,-D,$(DEFINES)) MKLIB=ar ruv $@ LIBEXT=a OBJTAIL=o FRAME_LIB=$(LIBDIR)/lib$(LIBNAME)$(XXX).$(LIBEXT) clean: @$(RM) $(OBJDIR)/*.$(OBJTAIL) @$(RM) $(FRAME_LIB) #_TESTOBJS=os_pro.o os_mem.o os_com.o os_sem.o os_tim.o os_mis.o #TESTOBJS=$(patsubst %.$(OBJTAIL),$(OBJDIR)/%.$(OBJTAIL),$(_TESTOBJS)) os_test: os_test$(tTail) @echo os_test$(tTail) built os_test$(tTail): $(_TESTOBJS) sus/os_test.c $(FRAME_LIB) $(CC) -g -o $@ $(INCLUDES) $(DEFINES) sus/os_test.c $(FRAME_LIB) -lpthread -lrt endif # osenv = sus #----------------------------------- Special settings for each target #----------Win32 ifeq ($(TARGET), win32) MISCXXX:=$(tTail)$(dbTail) TIFXXX:=$(tTail)$(dbTail) TOOLS_LIBDIR=../tools/lib OS_LAYER_SRC:=./vcms/ CC=cl COPTS += /c /nologo /GX /W3 /Zp1 /GZ INCLUDES += -I"." -I$(OS_LAYER_SRC) -I"..\inc\vcms" -I"..\inc\win32" -I"..\inc\vcms\win32" -I"..\inc" LINT_OPT_FILE += co-msc50.lnt LINT_OPTS = $(LINT_INC) -D_WIN32 -D_M_IX86 -D_MSC_VER -D"WIN32" -u $(LINT_OPT_FILE) INCLUDES += -I"..\lib\win32" _OS_LAYER += frame_dllmain.$(OBJTAIL) COPTS += /FR"..\temp\win32" /Fo./$(OBJDIR)/ DEFINES += -D"CRASH_TOL" DEFINES += -D"_TOOLS_" DEFINES += -D"FRAME_DLL" DLLFLAGS= /dll\ $(EXPFILE) $(LIBDIR)/misc$(MISCXXX).lib \ $(LIBDIR)/tif$(TIFXXX).lib \ $(LIBDIR)/ntutils.lib $(TOOLS_LIBDIR)/psapi.lib \ user32.lib COMMLFLAGS = $(DLLFLAGS) COMMLFLAGS += /nologo ifeq ($(DEBUG), 1) COPTS += -DEBUG /MDd /Z7 DEFINES += -D"_DEBUG" COMMLFLAGS += /DEBUG /incremental:no /pdb:none\ ../os_lib/win32/debug/cms.lib \ /nodefaultlib:"libcmtd" else #debug COPTS += /MD COMMLFLAGS += ../os_lib/win32/cms.lib \ /nodefaultlib:"libcmt" endif #debug COPTSNF = $(COPTS) $(DEFINES) $(INCLUDES) INCLUDELIST=$(subst /I ,-I,$(INCLUDES)) DEFINELIST=$(subst /D ,-D,$(DEFINES)) LFLAGS=$(COMMLFLAGS) LFLAGS += /SECTION:FRAME_SHARED,RWS LIBEXT = dll MKLIB=link.exe /out:$@ $(LFLAGS) OBJTAIL=obj FRAME_LIB=$(BINDIR)/$(LIBNAME)$(XXX).$(LIBEXT) COPTS_FILE= EXPFILE=$(LIBDIR)/frame$(XXX).exp IMPLIB=$(LIBDIR)/frame$(XXX).lib INC_FILES+=vcms/os_const.h implib: $(IMPLIB) $(IMPLIB) $(EXPFILE): $(OBJDIR) $(_OS_LAYER) $(_FRAMEOBJS) # OWN_MAKELEVEL == 0 if makefile called directly, == 1 if nested ifneq ($(OWN_MAKELEVEL), 0) @echo checking out and touching using $(MAKE) for two possible targets ($@), make level $(OWN_MAKELEVEL) $(CHECKOUT) $(IMPLIB) touch -c $(IMPLIB) else gnumake MAKE=gnumake OWN_MAKELEVEL=1 $(subst \,/,$@ $<) @echo proceeding using $(MAKE) for two possible targets ($@), make level $(OWN_MAKELEVEL) lib.exe /nologo /MACHINE:IX86 /DEF:frame$(msTail).def $(FRAMEOBJS)\ $(OS_LAYER) /OUT:$(IMPLIB) /NAME:frame$(XXX).dll endif clean: $(RM) $(OBJDIR)/*.$(OBJTAIL) $(RM) $(IMPLIB) $(EXPFILE) $(FRAME_LIB) endif # target: win32 #----------------------------------- Special settings for each target #----------pSOS+ ifeq ($(TARGET), psos) OS_LAYER_SRC:=./psos/ CC=cc386 COPTS_FILE:=c.opt _OS_LAYER += drv_conf.$(OBJTAIL) SPEC_F_OBJS= -include $(PSS_BSP)/bsp.mk# board support settings e.g. MODEL, FPU ifeq ( FPU,H ) FPUOPT = -VNDP else FPUOPT= endif COPTS1 = -c -V$(MODEL) -VROM -VBSS -VANSI -VLONGNAME -VSPROTO -VQUIET -VDIAGNOSTICS COPTS2 = $(FPUOPT) -I$(COMFSRC)/configps/ COPTS3 = -I. -I$(PSS_ROOT)/include -I$(PSS_BSP) -I$(PSS_ROOT)/bsps/devices COPTS4 = -I./ -I../inc/ -I../inc/psos/ -I./psos/ -I../../g23net/dev/config -I../TST COPTS5 = -DMODEL=$(MODEL) -VNOSIGNEDCHAR -D__CADUL__=1 -DPSOS=1 -D_PSOS_ ifeq ($(MEMSUPER), 2) COPTS5 += -DMEMORY_SUPERVISION -DOPTIMIZE_POOL endif ifeq ($(MEMSUPER), 1) COPTS5 += -DMEMORY_SUPERVISION endif ifeq ($(DEBUG), 1) COPTS5 += -VXDB endif COPTS5 += -DTEST_TARGET_IP_ADDRESS COPTS = @c.opt #$(COPTS1) $(COPTS2) $(COPTS3) $(COPTS4) $(COPTS5) ich wollte c.opt umgehen. erstmal keinen Erfolg. COPTS += -o $(OBJDIR)/$@ COPTSNF = $(COPTS) LIBEXT = lib MKLIB = lib386 $@ # psos related libs will not be included here OBJTAIL=obj FRAME_LIB=$(LIBDIR)/$(LIBNAME)$(XXX).$(LIBEXT) c.opt: makefile @echo $(COPTS1) > c.opt @echo $(COPTS2) >> c.opt @echo $(COPTS3) >> c.opt @echo $(COPTS4) >> c.opt @echo $(COPTS5) >> c.opt #psos.abs: os.abs wie? wozu?? #~~~~~~ clean: @$(RM) obj/$(TARGET)$(DB)$(PS)/*.$(OBJTAIL) @$(RM) $(FRAME_LIB) @$(RM) c.opt endif # target: psos #----------------------------------- Special settings for each target #---------- vxworks ifeq ($(TARGET), vxworks) OS_PART = os_part.$(OBJTAIL) CC = ccppc OS_LAYER_SRC = ./$(TARGET) SPEC_OSL_INC = SPEC_OSL_OBJS = SPEC_F_OBJS = ifeq ($(DEBUG), 1) COPTSNF = -g else COPTSNF = -O2 endif COPTSNF += -c -mstrict-align -ansi -nostdinc -DRW_MULTI_THREAD -D_REENTRANT \ -fvolatile -fno-builtin -fno-for-scope -DCPU=$(CPU) \ -I$(WIND_BASE)/target/h -I. -I../../g23net/dev/config -I../inc/$(TARGET) \ -I../inc -D_VXWORKS_ -I../TST ifeq ($(MEMSUPER), 2) COPTSNF += -DMEMORY_SUPERVISION -DOPTIMIZE_POOL endif ifeq ($(MEMSUPER), 1) COPTSNF += -DMEMORY_SUPERVISION endif COPTSNF += -o $(OBJDIR)/$@ LIBEXT = a MKLIB = arppc crus $@ OBJTAIL=obj FRAME_LIB= $(LIBDIR)/$(LIBNAME)$(XXX).$(LIBEXT) clean: @$(RM) obj/$(TARGET)$(DB)$(PS)/*.o* @$(RM) $(FRAME_LIB) endif # target: vxworks ######################### echo for control ################################## #echo: # @echo $(_OS_LAYER) # @echo $(OS_LAYER) # @echo $(_FRAMEOBJS) # @echo $(FRAMEOBJS) # @echo $(SRCFILES) # @echo $(DEFINES) # @echo $(DEFINELIST) ######################### OS layer ################################## OS_LAYER=$(patsubst %.$(OBJTAIL),$(OBJDIR)/%.$(OBJTAIL),$(_OS_LAYER)) os_layer: $(COPTS_FILE) $(_OS_LAYER) ######################### Frame ################################## .PHONY: all label help asm: $(OBJDIR) $(FRAME_LIB) FRAMEOBJS=$(patsubst %.$(OBJTAIL),$(OBJDIR)/%.$(OBJTAIL),$(_FRAMEOBJS)) frameobjs: $(COPTS_FILE) $(_OS_LAYER) $(_FRAMEOBJS) frame.$(LIBEXT): $(FRAME_LIB) $(OBJDIR) : $(MKDIR) -p $(OBJDIR) $(FRAME_LIB) : $(OBJDIR) $(COPTS_FILE) $(_OS_LAYER) $(_FRAMEOBJS) makefile $(EXPFILE) # OWN_MAKELEVEL == 0 if makefile called directly, == 1 if nested ifneq ($(OWN_MAKELEVEL), 0) @echo checking out and touching using $(MAKE) $(CHECKOUT) $@ $(IMPLIB) touch -c $@ $(IMPLIB) else gnumake MAKE=gnumake OWN_MAKELEVEL=1 $(subst \,/,$@ $<) @echo proceeding using $(MAKE) ifneq ($(OSENV), sus) $(RM) $@ endif $(MKLIB) $(FRAMEOBJS) $(OS_LAYER) $(ASMOBJS) ifeq ($(OSENV), sus) $(RANLIB) $@ endif endif $(_OS_LAYER) $(_FRAMEOBJS): %.$(OBJTAIL) : %.c $(RM) $(OBJDIR)/frame_version.$(OBJTAIL) ifneq ($(NO_LINT), 1) $(LINT) $(LINT_OPTS) $(DEFINES) $(INCLUDES) $< endif $(CC) $(COPTSNF) $< SRCFILES=$(patsubst %.$(OBJTAIL),%.c,$(_FRAMEOBJS) $(_OS_LAYER)) FRAME_DEP=dep_frame_$(PROJECT)$(XXX).mk help: $(ECHO) usage... $(ECHO) building: $(ECHO) "gnumake [DEBUG={1|0}] [ROUTING={1|0}] [MEMSUPER={1|0}] ..." $(ECHO) cleaning: $(ECHO) "gnumake clean [DEBUG={1|0}] [ROUTING={1|0}] [MEMSUPER={1|0}] ..." $(ECHO) ClearCase: $(ECHO) "gnumake checkin - not implemeted yet -" $(ECHO) "gnumake label LABEL=<label type> [FLOAT={1|0}] [DEBUG={1|0}] [ROUTING={1|0}] " $(ECHO) " [MEMSUPER={1|0}] ..." $(ECHO) help: $(ECHO) "gnumake help" DEPEND_DIRS=$(GPFDIR) $(LIBDIR) $(BINDIR) $(INCDIR) EXPORT_FILES=$(IMPLIB) $(FRAME_LIB) INCLUDE_FILES=$(patsubst %,../inc/%,$(INC_FILES)) label: -$(CLEARTOOL) mklabel -recurse $(REPLACE) $(LABEL) . 2>> error.log -$(CLEARTOOL) mklabel $(REPLACE) $(LABEL) $(DEPEND_DIRS) \ $(EXPORT_FILES) $(INCLUDE_FILES) 2>> error.log depend: $(SRCFILES) @touch $(FRAME_DEP) makedepend -b -f$(FRAME_DEP) $^ -Y -o.$(OBJTAIL) $(INCLUDELIST) $(DEFINELIST) @$(RM) $(FRAME_DEP) -include $(FRAME_DEP)