FreeCalypso > hg > fc-tourmaline

view src/ui/mfw/mfw_band.c @ 268:f2e52cab0a73

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 67bfe9f274f6
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: GSM-MFW                   $Workfile:: Mfw_band.c           $|
| $Author:: MC/SH                          $Revision::  1              $|
| STATE  : code                                                       |
+--------------------------------------------------------------------+

   MODULE  : MFW_BAND

   PURPOSE : AT%BAND functionality for MFW


   $History: Mfw_band.c                                              $

*/


#define ENTITY_MFW


#include <string.h>
#include <stdio.h>
#include <stdlib.h>

#include "typedefs.h"
#include "vsi.h"
#include "pei.h"
#include "custom.h"
#include "gsm.h"

#include "prim.h"
#ifndef PCM_2_FFS
#include "pcm.h"
#endif

/* BEGIN ADD: Sumit : Req ID: : 31-Mar-2005*/
#ifndef NEPTUNE_BOARD
/* END ADD: Sumit : Req ID: : 31-Mar-2005*/
#include "ffs/ffs.h"
/* BEGIN ADD: Sumit : Req ID: : 31-Mar-2005*/
#else
#include "ffs.h"
#endif
/* END ADD: Sumit : Req ID: : 31-Mar-2005*/


/* SPR#1470 - SH - these includes are now outside of
 * FAX_AND_DATA switch */
#include "message.h"
#include "prim.h"
#include "aci_cmh.h"

#if defined (FAX_AND_DATA)
/*#include "message.h"
#include "prim.h"
#include "aci_cmh.h"  SPR#1470 - SH */
#include "aci_fd.h"
#endif

#ifdef GPRS
#include "gprs.h"
#endif
#include "dti_conn_mng.h"

#include "phb.h"
#include "psa.h"
#include "cmh.h"
#include "cmh_phb.h"
#include "psa.h"
#include "psa_sim.h"
#include "cus_aci.h"
#include "cmh_mm.h"
#include "cmh_sim.h"

#include "Mfw_band.h"


/*
+--------------------------------------------------------------------+
| PROJECT: GSM-MFW (8417)               MODULE:  MFW_BAND          |
| STATE  : code                         ROUTINE: band_radio_mode_switch|
+--------------------------------------------------------------------+


   PURPOSE :   Set radio band and mode

*/

T_MFW_BAND_RET band_radio_mode_switch(T_MFW_BAND_MODE mode, UBYTE band)
{
	T_ACI_RETURN ret;

	TRACE_FUNCTION("band_radio_mode_switch");
      /*a0393213 compiler warnings removal - explicit typecasting done*/
	ret = sAT_PercentBAND(CMD_SRC_LCL, (T_ACI_BAND_MODE)mode, band); /*radio mode set without errors*/

	TRACE_EVENT_P1("Band: %d", band);
	TRACE_EVENT_P1("Return val: %d", ret);

	switch(ret)
	{
		case (AT_BUSY):
			return MFW_BAND_Busy;
//			break;  // RAVI
		case (AT_FAIL):
			return MFW_BAND_Fail;
//			break;   // RAVI
		case (AT_CMPL):
			return MFW_BAND_OK;
//			break;  // RAVI
		case (AT_EXCT):
			return MFW_BAND_InProgress;
//			break;   // RAVI
		default:
			return MFW_BAND_Fail;
//			break;     // RAVI
	}
}


/*
+--------------------------------------------------------------------+
| PROJECT: GSM-MFW (8417)               MODULE:  MFW_BAND          |
| STATE  : code                         ROUTINE: band_get_radio_modes  |
+--------------------------------------------------------------------+


   PURPOSE :   Get list of possible bands

*/

T_MFW_BAND_RET band_get_radio_modes(T_MFW_BAND_MODE* maxMode, UBYTE *band)
{
	T_ACI_RETURN ret;

	ret = tAT_PercentBAND(CMD_SRC_LCL, (T_ACI_BAND_MODE*)maxMode, (UBYTE*)band);

	if (ret == AT_CMPL)
		return MFW_BAND_OK;
	else
		return MFW_BAND_Fail;
}

/*
+--------------------------------------------------------------------------+
| PROJECT: GSM-MFW (8417)               MODULE:  MFW_BAND                |
| STATE  : code                         ROUTINE: band_get_current_radio_mode  |
+---------------------------------------------------------------------------+


   PURPOSE :   Get current band setting

*/
T_MFW_BAND_RET band_get_current_radio_mode(T_MFW_BAND_MODE* mode, UBYTE* band)
{
	T_ACI_RETURN ret;

	ret = qAT_PercentBAND(CMD_SRC_LCL, (T_ACI_BAND_MODE*)mode, (UBYTE*)band);

	if (ret == AT_CMPL)
		return MFW_BAND_OK;
	else
		return MFW_BAND_Fail;

}