view src/ui/mfw/ti1_tmr.h @ 268:f2e52cab0a73

abb_inth.c: check all interrupt causes, not just one The original code used if - else if - else if etc constructs, thus the first detected interrupt was the only one handled. However, Iota ITSTATREG is a clear-on-read register, thus if we only handle the first detected interrupt and skip checking the others, then the other interrupts will be lost, if more than one interrupt happened to occur in one ABB interrupt handling cycle - a form of rare race condition. Change the code to check all interrupts that were read in this cycle.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 13 Jun 2021 18:17:53 +0000
parents 92abb46dc1ba
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         $Workfile:: ti1_tmr.h       $|
| $Author:: Es  $ CONDAT GmbH           $Revision:: 3               $|
| CREATED: 28.01.99                     $Modtime:: 20.05.99 10:50   $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : TI1_TMR

   PURPOSE : timer driver (TI1 VERSION)

   EXPORT  :

   TO DO   :

   $History:: ti1_tmr.h                                             $
 *
 * *****************  Version 3  *****************
 * User: Es           Date: 14.06.99   Time: 12:15
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 2  *****************
 * User: Es           Date: 17.02.99   Time: 20:00
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 1  *****************
 * User: Es           Date: 9.02.99    Time: 14:54
 * Created in $/GSM/DEV/MS/SRC/MFW
 * TI display & keyboard interface for MFW
*/

#ifndef _DEF_TI1_TMR_H_
#define _DEF_TI1_TMR_H_

#define TMR_PREC    10
#if defined (_TMS470)
#define TMR_TICK    46                  /* ti hardware time         */
#else
#define TMR_TICK    500                 /* use dos ticks            */
#endif

#endif