FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/sap/mncc.pdf @ 89:f4c91ce88c0f
rm src/ui/bmi/mmiFileManager.[ch]
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 08 Nov 2020 01:47:38 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : mncc.pdf ;*** Creation : Wed Mar 11 09:58:24 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : mncc ;*** Document No. : 6147.101.96.116 ;*** Document Date : 2003-07-03 ;*** Document Status: BEING_PROCESSED ;*** Document Author: HM ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:47:40 2007" PRAGMA LAST_MODIFIED "2003-07-03" PRAGMA ID_AND_VERSION "6147.101.96.116" PRAGMA PREFIX MNCC ; Prefix with 'MNCC' CONST FACILITY_LEN 251 ; Max. length of facility considering L2 constraints CONST USER_LEN 128 ; CONST MAX_CC_CALLING_NUMBER 22 ; max. length of calling party BCD number (MT SETUP) CONST MAX_CC_REDIR_NUMBER 32 ; max. length of redirecting number (MT SETUP) CONST MAX_CC_CALLED_NUMBER 80 ; max. length of called party BCD number (MO SETUP) CONST SUB_LENGTH 20 ; CONST MAX_BC_LEN 10 ; EXTERN CONST @p_gsmcom - CC_ORIGINATING_ENTITY@ CC_ORIGINATING_ENTITY ; mask for indicating the originating entity of a cause is CC EXTERN CONST @p_gsmcom - ACI_ORIGINATING_ENTITY@ ACI_ORIGINATING_ENTITY ; mask for indicating the originating entity of a cause is ACI CONST TI_BERLIN 1 ; TI Berlin variant of the SAP CONST MAX_CC_CAUSE_LENGTH 30 ; Max. length of the raw cause variable VALTAB VAL_ti VAL 0 - 6 "ms originated identifier" VAL 8 - 14 "ms terminated transaction" VAL 7 TI_RES_1 "reserved" VAL 15 TI_RES_2 "reserved" VALTAB VAL_progress_desc VAL 1 PROG_NO_END_TO_END_PLMN "call is not end-to-end PLMN/ISDN, further call progress information may be available in-band" VAL 2 PROG_DEST_NON_PLMN "destination address in non-PLMN/ISDN" VAL 3 PROG_ORIGIN_NON_PLMN "origination address in non-PLMN/ISDN" VAL 4 PROG_RETURN_TO_PLMN "call has returned to the PLMN/ISDN" VAL 8 PROG_INBAND_AVAIL "in-band information or appropriate pattern now available" VAL 32 PROG_END_TO_END_PLMN "call is end-to-end PLMN/ISDN" VAL 64 PROG_QUEUEING "queueing" VAL 254 PROG_UNSPECIFIC "unspecific, used when coding standard is not equal to GSM; note that the value chosen here must not collide with any defined value of the progress description IE of the air interface" VAL 255 PROG_NOT_PRES "not present" VALTAB VAL_fac_context VAL 0 FAC_IN_ALERT "Facility information in ALERT message" VAL 1 FAC_IN_CALL_PROCEED "Facility information in CALL PROCEEDING message" VAL 2 FAC_IN_DISCONNECT "Facility information in DISCONNECT message" VAL 3 FAC_IN_RELEASE "Facility information in RELEASE message" VAL 4 FAC_IN_CONNECT "Facility information in CONNECT message" VAL 5 FAC_IN_SETUP "Facility information in SETUP message" VAL 6 FAC_IN_FACILITY "Facility information in USER INFORMATION message" VAL 7 FAC_IN_RELEASE_COMP "Facility information in RELEASE COMPLETE message" VAL 8 FAC_IN_RECALL "Facility information in RECALL message" VALTAB VAL_info_context VAL 0 USER_IN_ALERT "User information in ALERT message" VAL 1 USER_IN_DISCONNECT "User information in DISCONNECT message" VAL 2 USER_IN_PROGRESS "User information in PROGRESS message" VAL 3 USER_IN_RELEASE "User information in RELEASE message" VAL 4 USER_IN_CONNECT "User information in CONNECT message" VAL 5 USER_IN_SETUP "User information in SETUP message" VAL 6 USER_IN_USER "User information in USER INFORMATION message" VALTAB VAL_pd VAL 16 - 63 "reserved for other network layer or through layer 3 protocols including Rec.X.25" VAL 64 - 79 "national use" VAL 80 - 254 "reserved for other network through layer or layer 3 protocols including Rec.X.25" VAL 0 PD_USER "user specific protocol" VAL 1 PD_HIGH_LAYER "OSI high layer protocols" VAL 2 PD_X244 "X.244" VAL 3 PD_SYS_MANAGE "reserved for system management convergence function" VAL 4 PD_IA5 "IA5 characters" VAL 7 PD_V120 "Rec.V.120 rate adaption" VAL 8 PD_Q931 "Q.931 (I.451) user-network call control messages" VALTAB VAL_serv VAL 0 SERV_SPEECH "speech" VAL 1 SERV_DATA "data" VAL 255 SERV_NOT_PRES "not present" VALTAB VAL_cause VAL 0b0000010100000001 CAUSE_UNASSIGN "unassigned (unallocated) number" VAL 0b0000010100000011 CAUSE_NO_ROUTE "no route to destination" VAL 0b0000010100000110 CAUSE_CHAN_UNACCEPT "channel unacceptable" VAL 0b0000010100001000 CAUSE_BARRED "operator determined barring" VAL 0b0000010100010000 CAUSE_CALL_CLEAR "normal call clearing" VAL 0b0000010100010001 CAUSE_USER_BUSY "user busy" VAL 0b0000010100010010 CAUSE_NO_RESPONSE "no user responding" VAL 0b0000010100010011 CAUSE_ALERT_NO_ANSWER "user alerting, no answer" VAL 0b0000010100010101 CAUSE_CALL_REJECT "call rejected" VAL 0b0000010100010110 CAUSE_NUM_CHANGED "number changed" VAL 0b0000010100011001 CAUSE_PREEMPTION "pre-emption" VAL 0b0000010100011010 CAUSE_USER_CLEAR "non selected user clearing" VAL 0b0000010100011011 CAUSE_DEST_ORDER "destination out of order" VAL 0b0000010100011100 CAUSE_NUM_FORMAT "invalid number format (incomplete number)" VAL 0b0000010100011101 CAUSE_FACILITY_REJECT "facility rejected" VAL 0b0000010100011110 CAUSE_STATUS_ENQUIRY "response to status enquiry" VAL 0b0000010100011111 CAUSE_UNSPECIFIED "normal, unspecified" VAL 0b0000010100100010 CAUSE_NO_CHAN_AVAIL "no circuit / channel available" VAL 0b0000010100100110 CAUSE_NETWORK_ORDER "network out of order" VAL 0b0000010100101001 CAUSE_TEMP_FAIL "temporary failure" VAL 0b0000010100101010 CAUSE_SWITCH_CONGEST "switching equipment congestion" VAL 0b0000010100101011 CAUSE_INFO_DISCARD "access information discarded" VAL 0b0000010100101100 CAUSE_REQ_CHAN_UNAVAIL "requested circuit / channel not available" VAL 0b0000010100101111 CAUSE_RESOURCE_UNAVAIL "resources unavailable, unspecified" VAL 0b0000010100110001 CAUSE_QOS_UNAVAIL "quality of service unavailable" VAL 0b0000010100110010 CAUSE_FACILITY_UNSUBSCRIB "requested facility not subscribed" VAL 0b0000010100110111 CAUSE_BARRED_IN_CUG "incoming calls barred within the CUG" VAL 0b0000010100111001 CAUSE_BEARER_CAP_AUTHORIZ "bearer capability not authorized" VAL 0b0000010100111010 CAUSE_BEARER_CAP_UNAVAIL "bearer capability not presently available" VAL 0b0000010100111111 CAUSE_SERVICE_UNAVAIL "service or option not available, unspecified" VAL 0b0000010101000001 CAUSE_BEARER_NOT_IMPLEM "bearer service not implemented" VAL 0b0000010101000100 CAUSE_ACM_MAX "ACM equal or greater than ACMmax" VAL 0b0000010101000101 CAUSE_FACILITY_NOT_IMPLEM "requested facility not implemented" VAL 0b0000010101000110 CAUSE_RESTICT_BEARER_CAP "only restricted digital information bearer capability is available" VAL 0b0000010101001111 CAUSE_SERVICE_NOT_IMPLEM "service or option not implemented, unspecified" VAL 0b0000010101010001 CAUSE_INVALID_TI "invalid transaction identifier value" VAL 0b0000010101010111 CAUSE_USER_NOT_IN_CUG "user not member of CUG" VAL 0b0000010101011000 CAUSE_INCOMPAT_DEST "incompatible destination (originated by net)" VAL 0b0000010101011011 CAUSE_INVALID_TRANS_NET "invalid transit network selection" VAL 0b0000010101011111 CAUSE_INCORRECT_MESSAGE "semantically incorrect message" VAL 0b0000010101100000 CAUSE_INVALID_MAND_INFO "invalid mandatory information" VAL 0b0000010101100001 CAUSE_MESSAGE_TYPE_NOT_IMPLEM "message type non-existent or not implemented" VAL 0b0000010101100010 CAUSE_MESSAGE_TYPE_INCOMPAT "message type not compatible with protocol state" VAL 0b0000010101100011 CAUSE_INFO_ELEM_NOT_IMPLEM "information element non-existent or not implemented" VAL 0b0000010101100100 CAUSE_COND_INFO_ELEM "conditional information element error" VAL 0b0000010101100101 CAUSE_MESSAGE_INCOMPAT "message not compatible with protocol state" VAL 0b0000010101100110 CAUSE_TIMER "recovery on timer expiry" VAL 0b0000010101101111 CAUSE_PROTOCOL "protocol error, unspecified" VAL 0b0000010101111111 CAUSE_INTERWORKING "interworking, unspecified" VAL 0b0100010100011101 CAUSE_MS_FACILITY_REJECT "facility rejected (originated by MS)" VAL 0b0100010101000001 CAUSE_MS_BEARER_NOT_IMPLEM "bearer service not implemented (originated by MS)" VAL 0b0100010101010001 CAUSE_MS_INVALID_TI "invalid transaction identifier value (originated by MS)" VAL 0b0100010101011000 CAUSE_MS_INCOMPAT_DEST "incompatible destination (originated by MS)" VAL 0b0100010101100000 CAUSE_MS_INVALID_MAND_INFO "invalid mandatory information (originated by MS)" VAL 0b0100010101100100 CAUSE_MS_COND_INFO_ELEM "conditional information element error (originated by MS)" VAL 0b0100010101100101 CAUSE_MS_MESSAGE_INCOMPAT "message not compatible with protocol state (originated by MS)" VAL 0b0100010101100110 CAUSE_MS_TIMER "recovery on timer expiry (originated by MS)" VAL 0b1000010100000000 CAUSE_MODIFY_SUCCESS "in-call modification successfully performed, MODIFY COMPLETE message received" VAL 0b1000010100000010 CAUSE_HOLD_SUCCESS "hold successfully performed, HOLD ACKNOWLEDGE message received" VAL 0b1000010100000011 CAUSE_RETRIEVE_SUCCESS "retrieve successfully performed, RETRIEVE ACKNOWLEDGE message received" VAL 0b1000010100000100 CAUSE_DTMF_START_SUCCESS "start of DTMF successfully performed, START DTMF ACKNOWLEDGE message received" VAL 0b1000010100000101 CAUSE_DTMF_STOP_SUCCESS "stop of DTMF successfully performed, STOP DTMF ACKNOWLEDGE message received" VAL 0b1000010111111111 CAUSE_NO_NET_CAUSE "network initiated without cause" VAL 0b1100010100000000 CAUSE_SUCCESS "operation successfully performed (e.g. a call establishment); this cause is used only if no more specific cause applies" VAL 0b1100010100000001 CAUSE_DTMF_NOT_ALLOWED "DTMF is currently not allowed (no speech TCH)" VAL 0b1100010100000010 CAUSE_DTMF_BUFFER_FULL "DTMF storage buffer overflow" VAL 0b1100010100000011 CAUSE_DTMF_ABORTED "DTMF was aborted (e.g. due to state change)" VAL 0b1100010100000100 CAUSE_MAX_NO_RECALLS_REACHED "maximum number of recalls (CCBS) was reached" VAL 0b1100010100000101 CAUSE_MAX_NO_CALLS_REACHED "maximum number of calls was reached" VAL 0b1100010100000110 CAUSE_CHANNEL_SYNC "channel mode or type information (changed)" VAL 0b1100010100000111 CAUSE_REEST_STARTED "call re-establishment started" VAL 0b1100010100001000 CAUSE_REEST_FINISHED "call re-establishment is finished" VAL 0b1100010111111111 CAUSE_NO_MS_CAUSE "MS initiated without cause" VALTAB VAL_nd VAL 0 ND_USER_SUSPEND "user suspended" VAL 1 ND_USER_RESUME "user resumed" VAL 2 ND_BEAR_CHANGE "bearer change" VAL 255 ND_NOT_PRES "not present" VALTAB VAL_tos VAL 0 TOS_NSAP "NSAP (X.213/ISO 8348 AD2)" VAL 2 TOS_USER_SPEC "user specified" VAL 255 TOS_NOT_PRES "not present" VALTAB VAL_odd_even VAL 0 OE_EVEN "even number of address signals" VAL 1 OE_ODD "odd number of address signals" VALTAB VAL_key VAL 0x30 DIG_0 "digit '0'" VAL 0x31 DIG_1 "digit '1'" VAL 0x32 DIG_2 "digit '2'" VAL 0x33 DIG_3 "digit '3'" VAL 0x34 DIG_4 "digit '4'" VAL 0x35 DIG_5 "digit '5'" VAL 0x36 DIG_6 "digit '6'" VAL 0x37 DIG_7 "digit '7'" VAL 0x38 DIG_8 "digit '8'" VAL 0x39 DIG_9 "digit '9'" VAL 0x41 DIG_A "'A'" VAL 0x42 DIG_B "'B'" VAL 0x43 DIG_C "'C'" VAL 0x44 DIG_D "'D'" VAL 0x2A DIG_STAR "'('" VAL 0x23 DIG_HASH "'#'" VAL 0x7F DIG_RES "reserved" VALTAB VAL_ch_mode VAL 0 CHM_SIG_ONLY "signalling only" VAL 1 CHM_SPEECH "speech full rate or half rate version 1" VAL 33 CHM_SPEECH_V2 "speech full rate or half rate version 2" VAL 65 CHM_SPEECH_V3 "speech full rate or half rate version 3" VAL 3 CHM_DATA_9_6 "data 9.6 kBit/s" VAL 11 CHM_DATA_4_8 "data 4.8 kBit/s" VAL 19 CHM_DATA_2_4 "data 2.4 kBit/s" VAL 15 CHM_DATA_14_4 "data 2.4 kBit/s" VALTAB VAL_ch_type VAL 0 CH_SDCCH "SDCCH channel" VAL 1 CH_TCH_F "TCH Fullrate" VAL 2 CH_TCH_H "TCH Halfrate" VALTAB VAL_more_data VAL 0 MD_NO_MORE_DATA "no more data" VAL 1 MD_MORE_DATA "more data" VAL 255 MD_NOT_PRES "not present" VALTAB VAL_prio VAL 0 PRIO_NORM_CALL "normal call" VAL 1 PRIO_EMERG_CALL "emergency call" VALTAB VAL_clir_sup VAL 0 CLR_SUP "CLIR suppressed" VAL 1 CLR_SUP_NOT "CLIR not suppressed" VAL 0xFF CLR_NOT_PRES "CLIR not present" VALTAB VAL_sig VAL 0 SIG_DIAL_TONE_ON "dial tone on" VAL 1 SIG_RING_BACK_TONE_ON "ring back tone on" VAL 2 SIG_INT_TONE_ON "intercept tone on" VAL 3 SIG_NET_CONG_TONE_ON "network congestion tone on" VAL 4 SIG_BUSY_TONE_ON "busy tone on" VAL 5 SIG_CONF_TONE_ON "confirm tone on" VAL 6 SIG_ANS_TONE_ON "answer tone on" VAL 7 SIG_CALL_WAIT_TONE_ON "call waiting tone on" VAL 8 SIG_OFF_HOOK_WARN_TONE_ON "off-hook warning tone on" VAL 63 SIG_TONES_OFF "tones off" VAL 79 SIG_ALERT_OFF "alerting off" VAL 255 SIG_NOT_PRES "not present" VALTAB VAL_congest_lev VAL 0 CL_RECEIVER_READY "receiver ready" VAL 15 CL_RECEIVER_NOT_READY "receiver not ready" VAL 255 CL_NOT_PRES "not present" VALTAB VAL_ss_version VAL 0 SS_VERSION_2 "phase 2 service, ellipsis notation and phase 2 error handling" VAL 1 SS_VERSION_3 "SS-Protocol version 3 and phase 2 error handling" VAL 255 SS_VER_NOT_PRES "not present" VALTAB VAL_ri VAL 1 RI_CIRCULAR "circular" VAL 2 RI_FALLBACK "fallback" VAL 3 RI_SEQUENTIAL "sequential" VAL 255 RI_NOT_PRES "not present" VALTAB VAL_transfer_cap VAL 0 ITC_NONE "No ITC - i.e. 3,1 kHz Audio" VAL 1 ITC_UDI "Unrestricted Digital" VAL 2 ITC_RDI "Restricted Digital" VALTAB VAL_parity VAL 0 PARITY_ODD "odd parity" VAL 2 PARITY_EVEN "even parity" VAL 3 PARITY_NONE "no parity" VAL 4 PARITY_FORCED_TO_0 "parity forced to zero" VAL 5 PARITY_FORCED_TO_1 "parity forced to one" VALTAB VAL_bearer_serv VAL 0 BEARER_SERV_SYNC "synchronous" VAL 1 BEARER_SERV_ASYNC "asynchronous" VAL 2 BEARER_SERV_PAD_ACCESS "PAD access (async)" VAL 3 BEARER_SERV_PACKET_ACCESS "packet access (sync)" VAL 4 BEARER_SERV_FAX "fax" VAL 5 BEARER_SERV_SPEECH "Speech" VAL 6 BEARER_SERV_AUX_SPEECH "Auxiliary Speech" VAL 7 BEARER_SERV_SPEECH_CTM "Speech with CTM (TTY) support" VAL 8 BEARER_SERV_AUX_SPEECH_CTM "Auxiliary Speech CTM (TTY) support" VAL 255 BEARER_SERV_NOT_PRES "not present" VALTAB VAL_modem_type VAL 0 MT_NONE "modem type none" VAL 1 MT_V21 "modem type V.21" VAL 2 MT_V22 "modem type V.22" VAL 3 MT_V22_BIS "modem type V.22bis" VAL 4 MT_V23 "modem type V.23" VAL 5 MT_V26_TER "modem type V.26ter" VAL 6 MT_V32 "modem type V.32" VAL 7 MT_UNDEF "modem type for undefined interface" VAL 8 MT_AUTOBAUD "modem type autobauding type 1" VAL 9 MT_V32_BIS "modem type V.32bis" VAL 10 MT_V34 "modem type V.34" VALTAB VAL_rate VAL 1 UR_0_3_KBIT "rate : 0.3 kbit/s Recommendation X.1 and V.110" VAL 2 UR_1_2_KBIT "rate : 1.2 kbit/s Recommendation X.1 and V.110" VAL 3 UR_2_4_KBIT "rate : 2.4 kbit/s Recommendation X.1 and V.110" VAL 4 UR_4_8_KBIT "rate : 4.8 kbit/s Recommendation X.1 and V.110" VAL 5 UR_9_6_KBIT "rate : 9.6 kbit/s Recommendation X.1 and V.110" VAL 6 UR_12_0_KBIT_TRANS "rate : 12.0 kbit/s transparent" VAL 7 UR_1_2_KBIT_V23 "rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110." VAL 8 UR_14_4_KBIT "rate : 14.4 kbit/s" VAL 255 UR_NOT_PRES "not present" VALTAB VAL_flow_control VAL 8 INBAND_FLOW_CONTROL "inband flow control (ISO 6429)" VAL 12 NO_FLOW_CONTROL "no flow control (COPnoFLCT)" VAL 255 OUTBAND_FLOW_CONTROL "outband flow control" VALTAB VAL_conn_elem VAL 0 CONN_ELEM_TRANS "transparent" VAL 1 CONN_ELEM_NON_TRANS "non transparent (RLP)" VAL 2 CONN_ELEM_TRANS_PREF "both, transparent preferred" VAL 3 CONN_ELEM_NON_TRANS_PREF "both, non transparent (RLP) preferred" VAL 255 CONN_ELEM_NOT_PRES "not present" VALTAB VAL_stop_bits VAL 0 STOP_1_BIT "one stop bit" VAL 1 STOP_2_BIT "two stop bits" VALTAB VAL_rate_adaption VAL 0 RATE_ADAPT_NONE "No rate adaption" VAL 1 RATE_ADAPT_V110 "Information transfer capability for ISDN Asynchronous" VAL 2 RATE_ADAPT_X31 "X.31 Flag stuffing" VAL 3 RATE_ADAPT_V120 "Information transfer capability for ISDN Synchronous" VAL 4 RATE_ADAPT_H223_H245 "H.223 and H.245" VAL 5 RATE_ADAPT_PIAFS "PIAFS" VALTAB VAL_data_bits VAL 0 DATA_7_BIT "seven data bits" VAL 1 DATA_8_BIT "eight data bits" VALTAB VAL_diagnostic VAL 129 DIAG_MOC_BAR_CUG "Outgoing calls barred within CUG" VAL 130 DIAG_NO_CUG_SELECTED "No CUG selected" VAL 131 DIAG_UNKNOWN_CUG_INDEX "Unknown CUG index" VAL 132 DIAG_INCOMPAT_CUG_INDEX "CUG index incompatible with requested basic service" VAL 133 DIAG_CUG_FAIL_UNSPEC "CUG call Failure unspecified" VAL 134 DIAG_CLIR_NOT_SUBSCRIBED "CLIR not subscribed" VAL 135 DIAG_CCBS_POSSIBLE "CCBS possible" VAL 136 DIAG_CCBS_NOT_POSSIBLE "CCBS not possible" VALTAB VAL_ss_diag VAL 1 SS_DIAG_MOC_BAR_CUG "Outgoing calls barred within CUG" VAL 2 SS_DIAG_NO_CUG_SELECTED "No CUG selected" VAL 3 SS_DIAG_UNKNOWN_CUG_INDEX "Unknown CUG index" VAL 4 SS_DIAG_INCOMPAT_CUG_INDEX "CUG index incompatible with requested basic service" VAL 5 SS_DIAG_CUG_FAIL_UNSPEC "CUG call Failure unspecified" VAL 6 SS_DIAG_CLIR_NOT_SUBSCRIBED "CLIR not subscribed" VAL 7 SS_DIAG_CCBS_POSSIBLE "CCBS possible" VAL 8 SS_DIAG_CCBS_NOT_POSSIBLE "CCBS not possible" VAL 255 SS_DIAG_NOT_PROVIDED "Not Provided" VALTAB VAL_sns_mode VAL 0 SNS_MODE_VOICE "voice calls" VAL 1 SNS_MODE_VAF_VOICE "voice alternating FAX, voice first" VAL 2 SNS_MODE_FAX "FAX calls" VAL 3 SNS_MODE_VAD_VOICE "voice alternating data, voice first" VAL 4 SNS_MODE_DATA "data calls" VAL 5 SNS_MODE_VAF_FAX "voice alternating FAX, FAX first" VAL 6 SNS_MODE_VAD_DATA "voice alternating data, data first" VAL 7 SNS_MODE_VFD "voice followed by data" VALTAB VAL_dtmf_mod VAL 0 DTMF_MOD_AUTO "automatic mode with fixed duration" VAL 1 DTMF_MOD_MAN_START "manual mode start sending DTMF digit" VAL 2 DTMF_MOD_MAN_STOP "manual mode stop sending DTMF digit" VALTAB VAL_bc_mod VAL 0 BC_MOD_CODE "code bearer capabilities" VAL 1 BC_MOD_DECODE "decode bearer capabilities" VALTAB VAL_rcl_type VAL 0 RCL_CCBS "CCBS" VAL 1 RCL_CCBS_1 "treated as CCBS" VAL 2 RCL_CCBS_2 "treated as CCBS" VAL 3 RCL_CCBS_3 "treated as CCBS" VAL 4 RCL_CCBS_4 "treated as CCBS" VAL 5 RCL_CCBS_5 "treated as CCBS" VAL 6 RCL_CCBS_6 "treated as CCBS" VALTAB VAL_synccs VAL 0 SYNCCS_MPTY_EVENT "Multi party event" VAL 0xFFFF SYNCCS_NOT_PRESENT "Synchronization cause not present" VALTAB VAL_mpty_event VAL 0 MPTY_BUILD_SENT "BuildMPTY Invoke sent" VAL 1 MPTY_BUILD_FAIL "BuildMPTY Invoke failed" VAL 2 MPTY_BUILD_SUCCESS "BuildMPTY Invoke ok" VAL 3 MPTY_SPLIT_SENT "SplitMPTY Invoke sent" VAL 4 MPTY_SPLIT_FAIL "SplitMPTY Invoke failed" VAL 5 MPTY_SPLIT_SUCCESS "SplitMPTY Invoke Return Result ok" VAL 6 MPTY_HOLD_SENT "HoldMPTY Invoke sent" VAL 7 MPTY_HOLD_FAIL "HoldMPTY Invoke failed" VAL 8 MPTY_HOLD_SUCCESS "HoldMPTY Invoke ok" VAL 9 MPTY_RETRIEVE_SENT "RetrieveMPTY Invoke" VAL 10 MPTY_RETRIEVE_FAIL "RetrieveMPTY Invoke failed" VAL 11 MPTY_RETRIEVE_SUCCESS "RetrieveMPTY Invoke Return Result ok" VAL 0xFF MPTY_NOT_PRESENT "Parameter not present" VALTAB VAL_ctm_ena VAL 2 - 255 "reserved, to be treated as CTM not supported" VAL 0 CTM_DISABLED "CTM not supported" VAL 1 CTM_ENABLED "CTM supported" VALTAB VAL_ton VAL 0 TON_UNKNOWN "unknown" VAL 1 TON_INT_NUMB "international number" VAL 2 TON_NAT_NUMB "national number" VAL 3 TON_NET_SPEC_NUMB "network specific number" VAL 4 TON_DED_ACC_SC "dedicated access, short code" VAL 255 TON_NOT_PRES "type of number not present" VALTAB VAL_npi VAL 0 NPI_UNKNOW "unknown" VAL 1 NPI_ISDN_TEL_NUMB_PLAN "ISDN/telephony numbering plan" VAL 3 NPI_DATA_NUMB_PLAN "data numbering plan" VAL 4 NPI_TELEX_NUMB_PLAN "telex numbering plan" VAL 8 NPI_NAT_NUMB_PLAN "national numbering plan" VAL 9 NPI_PRIV_NUMB_PLAN "private numbering plan" VAL 255 NPI_NOT_PRES "numbering plan identification not present" VALTAB VAL_present VAL 0 PRES_PRES_ALLOW "presentation allowed" VAL 1 PRES_PRES_REST "presentation restricted" VAL 2 PRES_NUMB_NOT_AVAIL "number not available due to interworking" VAL 255 PRES_NOT_PRES "not present" VALTAB VAL_screen VAL 0 SCREEN_USER_PROV_NOT_SCREEN "user provided, not screened" VAL 1 SCREEN_USER_PROV_VER_PASS "user provided, verified and passed" VAL 2 SCREEN_USER_PROV_VER_FAIL "user provided, verified and failed" VAL 3 SCREEN_NET_PROV "network provided" VAL 255 SCREEN_IND_NOT_PRES "not present" VAR ti "transaction identifier" B VAL @p_mncc - VAL_ti@ VAR progress_desc "progress description" B VAL @p_mncc - VAL_progress_desc@ VAR fac_context "facility information element context" B VAL @p_mncc - VAL_fac_context@ VAR info_context "user to user message context" B VAL @p_mncc - VAL_info_context@ VAR pd "user to user protocol discriminator" B VAL @p_mncc - VAL_pd@ VAR c_info "length of user to user data" B VAR info "user to user information" B VAR serv "service code" B VAL @p_mncc - VAL_serv@ VAR cause "cause" S VAL @p_mncc - VAL_cause@ VAR nd "notification description" B VAL @p_mncc - VAL_nd@ VAR c_num "number of BCD digits" B VAR num "bcd" B VAR c_called_num "number of BCD digits" B VAR called_num "bcd" B VAR tos "type of subaddress" B VAL @p_mncc - VAL_tos@ VAR odd_even "odd / even indicator" B VAL @p_mncc - VAL_odd_even@ VAR c_subaddr "length of subaddress information" B VAR subaddr "subaddress information" B VAR key "DTMF digit" B VAL @p_mncc - VAL_key@ VAR ch_type "Channel Type" B VAL @p_mncc - VAL_ch_type@ VAR ch_mode "Channel Mode" B VAL @p_mncc - VAL_ch_mode@ VAR more_data "more data" B VAL @p_mncc - VAL_more_data@ VAR prio "priority" B VAL @p_mncc - VAL_prio@ VAR clir_sup "CLIR suppression" B VAL @p_mncc - VAL_clir_sup@ VAR sig "signal" B VAL @p_mncc - VAL_sig@ VAR congest_lev "Congestion Level" B VAL @p_mncc - VAL_congest_lev@ VAR ss_version "SS Version number" B VAL @p_mncc - VAL_ss_version@ VAR ri "repeat indicator" B VAL @p_mncc - VAL_ri@ VAR rate "user rate" B VAL @p_mncc - VAL_rate@ VAR bearer_serv "bearer service" B VAL @p_mncc - VAL_bearer_serv@ VAR conn_elem "connection element" B VAL @p_mncc - VAL_conn_elem@ VAR stop_bits "stop bits" B VAL @p_mncc - VAL_stop_bits@ VAR data_bits "data bits" B VAL @p_mncc - VAL_data_bits@ VAR parity "parity" B VAL @p_mncc - VAL_parity@ VAR flow_control "flow control" B VAL @p_mncc - VAL_flow_control@ VAR modem_type "modem type" B VAL @p_mncc - VAL_modem_type@ VAR rate_adaption "rate_adaption" B VAL @p_mncc - VAL_rate_adaption@ VAR transfer_cap "transfer_cap" B VAL @p_mncc - VAL_transfer_cap@ VAR l_fac "facility length" S VAR o_fac "facility offset" S VAR fac "facility content" B VAR diagnostic "Diagnostic Information" B VAL @p_mncc - VAL_diagnostic@ VAR sns_mode "Single numbering scheme mode" B VAL @p_mncc - VAL_sns_mode@ VAR dtmf_mod "Mode for sending DTMF digit" B VAL @p_mncc - VAL_dtmf_mod@ VAR bc_mod "Mode for conversion of bearer capabilities" B VAL @p_mncc - VAL_bc_mod@ VAR bc_len "coded bearer cap length" B VAR bc "coded bearer cap" B VAR req_id "Request identifier of originator" B VAR rcl_type "recall type" B VAL @p_mncc - VAL_rcl_type@ VAR synccs "Synchronization cause" S VAL @p_mncc - VAL_synccs@ VAR mpty_event "multi party event" B VAL @p_mncc - VAL_mpty_event@ VAR c_redir_num "number of BCD digits" B VAR redir_num "bcd" B VAR ctm_ena "CTM support send to NW in BC indicating speech" B VAL @p_mncc - VAL_ctm_ena@ VAR ton "type of number" B VAL @p_mncc - VAL_ton@ VAR npi "numbering plan identification" B VAL @p_mncc - VAL_npi@ VAR present "presentation indicator" B VAL @p_mncc - VAL_present@ VAR screen "screening indicator" B VAL @p_mncc - VAL_screen@ VAR ss_diag "Supplementary Diagnostic Element" B VAL @p_mncc - VAL_ss_diag@ VAR c_raw_cause "Number of cause bytes" B VAR raw_cause "cause as received from network" B VAR rad_chan_req "rad_chan_req" B COMP user "user to user data" { info_context ; user to user message context pd ; user to user protocol discriminator c_info ; length of user to user data info [USER_LEN] ; user to user information } COMP calling_party "calling party" { ton ; type of number npi ; numbering plan identification present ; presentation indicator screen ; screening indicator c_num ; number of BCD digits num [MAX_CC_CALLING_NUMBER] ; bcd } TYPEDEF COMP calling_party connected_number "connected number" COMP called_party "called party address" { ton ; numbering type npi ; numbering plan c_called_num ; number of BCD digits called_num [MAX_CC_CALLED_NUMBER] ; bcd } COMP calling_party_sub "calling party subaddress" { tos ; type of subaddress odd_even ; odd / even indicator c_subaddr ; length of subaddress information subaddr [SUB_LENGTH] ; subaddress information } TYPEDEF COMP calling_party_sub called_party_sub "called party subaddress" TYPEDEF COMP calling_party_sub connected_number_sub "connected number subaddress" TYPEDEF COMP calling_party_sub redirecting_party_sub "redirecting party subaddress" COMP ch_info "Channel using mode" { ch_type ; Channel Type ch_mode ; Channel Mode } COMP bcpara "bearer capability parameter" { rate ; user rate bearer_serv ; bearer service conn_elem ; connection element stop_bits ; stop bits data_bits ; data bits parity ; parity flow_control ; flow control modem_type ; modem type rate_adaption ; rate_adaption transfer_cap ; transfer_cap rad_chan_req ; rad_chan_req } TYPEDEF COMP bcpara bcpara2 "bearer capability parameter" COMP fac_inf "facility information" { l_fac ; facility length o_fac ; facility offset fac [FACILITY_LEN] ; facility content } COMP bcconf "bearer capability configuration" { bc_len ; coded bearer cap length bc [MAX_BC_LEN] ; coded bearer cap } TYPEDEF COMP bcconf bcconf2 "second bearer capability configuration" COMP redirecting_party "redirecting party address" { ton ; numbering type npi ; numbering plan present ; presentation indicator screen ; screening indicator c_redir_num ; number of BCD digits redir_num [MAX_CC_REDIR_NUMBER] ; bcd } ; MNCC_ALERT_IND 0x8000400B ; MNCC_CALL_PROCEED_IND 0x8001400B ; MNCC_DISCONNECT_IND 0x8002400B ; MNCC_HOLD_CNF 0x8003400B ; MNCC_MODIFY_CNF 0x8004400B ; MNCC_MODIFY_IND 0x8005400B ; MNCC_NOTIFY_IND 0x8006400B ; MNCC_PROGRESS_IND 0x8007400B ; MNCC_REJECT_IND 0x8008400B ; MNCC_RELEASE_CNF 0x8009400B ; MNCC_RELEASE_IND 0x800A400B ; MNCC_RETRIEVE_CNF 0x800B400B ; MNCC_SETUP_CNF 0x800C400B ; MNCC_SETUP_COMPL_IND 0x800D400B ; MNCC_SETUP_IND 0x800E400B ; MNCC_START_DTMF_CNF 0x800F400B ; MNCC_BEARER_CAP_CNF 0x8013400B ; MNCC_SYNC_IND 0x8010400B ; MNCC_USER_IND 0x8011400B ; MNCC_FACILITY_IND 0x8012400B ; MNCC_PROMPT_IND 0x8014400B ; MNCC_RECALL_IND 0x8015400B ; MNCC_STATUS_IND 0x8016400B ; MNCC_SETUP_REQ 0x8000000B ; MNCC_SETUP_RES 0x8001000B ; MNCC_ALERT_REQ 0x8002000B ; MNCC_DISCONNECT_REQ 0x8003000B ; MNCC_RELEASE_REQ 0x8004000B ; MNCC_MODIFY_REQ 0x8005000B ; MNCC_CONFIGURE_REQ 0x8006000B ; MNCC_NOTIFY_REQ 0x8007000B ; MNCC_START_DTMF_REQ 0x8008000B ; MNCC_HOLD_REQ 0x8009000B ; MNCC_RETRIEVE_REQ 0x800A000B ; MNCC_FACILITY_REQ 0x800B000B ; MNCC_USER_REQ 0x800C000B ; MNCC_BEARER_CAP_REQ 0x800D000B ; MNCC_PROMPT_RES 0x800E000B ; MNCC_PROMPT_REJ 0x800F000B ; MNCC_REJECT_REQ 0x8010000B ; MNCC_SYNC_REQ 0x8011000B ; MNCC_STATUS_RES 0x8012000B PRIM MNCC_ALERT_IND 0x8000400B { ti ; transaction identifier progress_desc ; progress indicator } PRIM MNCC_CALL_PROCEED_IND 0x8001400B { ti ; transaction identifier progress_desc ; progress indicator ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter } PRIM MNCC_DISCONNECT_IND 0x8002400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_MS_COND_INFO_ELEM, MNCC_CAUSE_MS_INVALID_MAND_INFO and all those previously indicated via MNCC_DISCONNECT_REQ. diagnostic ; Additional cause info ss_diag ; Additional supplementary service diagnostic info progress_desc ; progress description c_raw_cause ; Number of cause bytes raw_cause [MAX_CC_CAUSE_LENGTH] ; cause as received from NW } PRIM MNCC_HOLD_CNF 0x8003400B { ti ; transaction identifier cause ; Cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_HOLD_SUCCESS. It is possible for the network to not add a Cause IE. In this case, cause is MNCC_CAUSE_NO_NET_CAUSE } PRIM MNCC_MODIFY_CNF 0x8004400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_MODIFY_SUCCESS, MNCC_CAUSE_MS_TIMER. c_raw_cause ; Number of cause bytes raw_cause [MAX_CC_CAUSE_LENGTH] ; cause as received from NW } PRIM MNCC_MODIFY_IND 0x8005400B { ti ; transaction identifier serv ; service code } PRIM MNCC_NOTIFY_IND 0x8006400B { ti ; transaction identifier nd ; notification } PRIM MNCC_PROGRESS_IND 0x8007400B { ti ; transaction identifier progress_desc ; progress indicator } PRIM MNCC_REJECT_IND 0x8008400B { ti ; transaction identifier cause ; reject cause; The following causes can occur within this primitive: MNCC_CAUSE_MS_INCOMPAT_DEST, MNCC_CAUSE_MS_TIMER of 4.6 and all possible within the MMCC_RELEASE_IND and MMCC_ERROR_IND primitives of the MMCC SAP. } PRIM MNCC_RELEASE_CNF 0x8009400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_NO_NET_CAUSE and MNCC_CAUSE_MS_MESSAGE_INCOMPAT, MNCC_CAUSE_MS_TIMER. c_raw_cause ; Number of cause bytes raw_cause [MAX_CC_CAUSE_LENGTH] ; cause as received from NW } PRIM MNCC_RELEASE_IND 0x800A400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_NO_NET_CAUSE and MNCC_CAUSE_MS_MESSAGE_INCOMPAT, MNCC_CAUSE_MS_INVALID_TI, MNCC_CAUSE_MS_BEARER_NOT_IMPLEM, MNCC_CAUSE_MS_COND_INFO_ELEM, MNCC_CAUSE_MS_INVALID_MAND_INFO, MNCC_CAUSE_MAX_NO_CALLS_REACHED, MNCC_CAUSE_MAX_NO_RECALLS_REACHED, MNCC_CAUSE_MS_INCOMPAT_DEST, MNCC_CAUSE_MS_FACILITY_REJECT, MNCC_CAUSE_MS_TIMER of 4.6 and all possible within the MMCC_RELEASE_IND (CCBS) and all causes sent by higher layers within MNCC_DISCONNECT_REQ (CCBS and when no network connection) and the MMCC_ERROR_IND primitive of the MMCC SAP. c_raw_cause ; Number of cause bytes raw_cause [MAX_CC_CAUSE_LENGTH] ; cause as received from NW } PRIM MNCC_RETRIEVE_CNF 0x800B400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_RETRIEVE_SUCCESS. It is possible for the network to not add a Cause IE. In this case, cause is MNCC_CAUSE_NO_NET_CAUSE } PRIM MNCC_SETUP_CNF 0x800C400B { ti ; transaction identifier cause ; (resulting) cause; The following causes can occur within this primitive: MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_TIMER. progress_desc ; progress description connected_number ; connected number connected_number_sub ; connected sub address } PRIM MNCC_SETUP_COMPL_IND 0x800D400B { ti ; transaction identifier cause ; (resulting) cause; The following causes can occur within this primitive: MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_TIMER. } PRIM MNCC_SETUP_IND 0x800E400B { ti ; transaction identifier ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter progress_desc ; progress indicator sig ; signal calling_party ; calling party calling_party_sub ; calling party sub called_party ; called party called_party_sub ; called party sub redirecting_party ; redirecting party redirecting_party_sub ; redirecting party sub } PRIM MNCC_START_DTMF_CNF 0x800F400B { ti ; transaction identifier key ; keypad digit cause ; cause; The following causes can occur within this primitive: all those of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00... and MNCC_CAUSE_DTMF_NOT_ALLOWED, MNCC_CAUSE_DTMF_BUFFER_FULL, MNCC_CAUSE_DTMF_ABORTED, MNCC_CAUSE_DTMF_START_SUCCESS, MNCC_CAUSE_MS_TIMER. dtmf_mod ; dtmf mode } PRIM MNCC_BEARER_CAP_CNF 0x8013400B { req_id ; request id bc_mod ; conversion mode bcconf ; coded bearer cap bcpara ; decoded bearer cap bcconf2 ; coded bearer cap2 bcpara2 ; decoded bearer cap2 cause ; translation cause; The following causes can occur within this primitive: MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_INCOMPAT_DEST. } PRIM MNCC_SYNC_IND 0x8010400B { ti ; transaction identifier cause ; cause; The following causes can occur within this primitive: MNCC_CAUSE_CHANNEL_SYNC, MNCC_CAUSE_REEST_STARTED, MNCC_CAUSE_REEST_FINISHED. ch_info ; channel mode } PRIM MNCC_USER_IND 0x8011400B { ti ; transaction identifier congest_lev ; congestion level more_data ; more data user ; user to user } PRIM MNCC_FACILITY_IND 0x8012400B { ti ; transaction identifier fac_context ; facility context fac_inf ; facility information } PRIM MNCC_PROMPT_IND 0x8014400B { } PRIM MNCC_RECALL_IND 0x8015400B { ti ; transaction identifier ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter called_party ; called party address called_party_sub ; called party sub rcl_type ; recall type } PRIM MNCC_STATUS_IND 0x8016400B { ti ; transaction identifier } PRIM MNCC_SETUP_REQ 0x8000000B { ti ; transaction identifier prio ; priority ri ; repeat indicator bcpara ; bearer cap parameter bcpara2 ; bearer cap parameter called_party ; called party address called_party_sub ; called party sub clir_sup ; clir suppression fac_inf ; facility information } PRIM MNCC_SETUP_RES 0x8001000B { ti ; transaction identifier } PRIM MNCC_ALERT_REQ 0x8002000B { ti ; transaction identifier } PRIM MNCC_DISCONNECT_REQ 0x8003000B { ti ; transaction identifier cause ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. fac_inf ; facility information ss_version ; ss version } PRIM MNCC_RELEASE_REQ 0x8004000B { ti ; transaction identifier cause ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. In addition MNCC_CAUSE_NO_MS_CAUSE could be used if compliant to the CC peer to peer protocol in the current situation. fac_inf ; facility information ss_version ; ss version } PRIM MNCC_MODIFY_REQ 0x8005000B { ti ; transaction identifier serv ; service code } PRIM MNCC_CONFIGURE_REQ 0x8006000B { called_party_sub ; called party subaddress bcpara ; bearer cap parameter sns_mode ; single numbering mode ctm_ena ; CTM support enabled } PRIM MNCC_NOTIFY_REQ 0x8007000B { ti ; transaction identifier nd ; notification description } PRIM MNCC_START_DTMF_REQ 0x8008000B { ti ; transaction identifier key ; keypad digit dtmf_mod ; DTMF mode } PRIM MNCC_HOLD_REQ 0x8009000B { ti ; transaction identifier } PRIM MNCC_RETRIEVE_REQ 0x800A000B { ti ; transaction identifier } PRIM MNCC_FACILITY_REQ 0x800B000B { ti ; transaction identifier fac_inf ; facility information ss_version ; ss version } PRIM MNCC_USER_REQ 0x800C000B { ti ; transaction identifier congest_lev ; congestion level more_data ; more data user ; user to user } PRIM MNCC_BEARER_CAP_REQ 0x800D000B { req_id ; request id bc_mod ; conversion mode bcconf ; coded bearer cap bcpara ; decoded bearer cap bcconf2 ; coded bearer cap2 bcpara2 ; decoded bearer cap2 } PRIM MNCC_PROMPT_RES 0x800E000B { ti ; transaction identifier } PRIM MNCC_PROMPT_REJ 0x800F000B { } PRIM MNCC_REJECT_REQ 0x8010000B { ti ; transaction identifier cause ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. In addition MNCC_CAUSE_NO_MS_CAUSE could be used if compliant to the CC peer to peer protocol in the current situation. } PRIM MNCC_SYNC_REQ 0x8011000B { synccs ; synchronization cause ti ; transaction identifier mpty_event ; multi party event } PRIM MNCC_STATUS_RES 0x8012000B { ti ; transaction identifier }