FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/cfile/l1_api_hisr.c @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1_API_HISR.C
 *
 *        Filename l1_api_hisr.c
 *  Copyright 2003 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/

#include "l1_confg.h"
#include "nucleus.h"
#include "sys_types.h"
#include "l1_types.h"
#include "l1audio_cust.h"
#include "l1audio_defty.h"
#include "l1audio_const.h"
#include "l1_const.h"
#include "cust_os.h"
#include "l1tm_defty.h"
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif
#if (L1_MP3 == 1)
  #include "l1mp3_const.h"
  #include "l1mp3_signa.h"
  #include "l1mp3_defty.h"
  #include "l1mp3_proto.h"
#endif
#if (L1_MIDI == 1)
  #include "l1midi_const.h"
  #include "l1midi_signa.h"
  #include "l1midi_defty.h"
  #include "l1midi_proto.h"
#endif
#if (L1_AAC == 1)
  #include "l1aac_const.h"
  #include "l1aac_signa.h"
  #include "l1aac_defty.h"
  #include "l1aac_proto.h"
#endif
#if (L1_DYN_DSP_DWNLD==1)
  #include "l1_dyn_dwl_defty.h"
  #include "l1_dyn_dwl_msgty.h"
  #include "l1_dyn_dwl_const.h"
  #include "l1_dyn_dwl_signa.h"
  #include "l1_dyn_dwl_error.h"
  #include "l1_dyn_dwl_proto.h" 
  #include "l1_api_hisr.h"
#endif
#include "l1_defty.h"
#include "l1_api_hisr.h"
#include "l1audio_signa.h"
#include "l1_varex.h"
#include "l1_macro.h"
#include "mem.h"


/*-------------------------------------------------------------*/
/* l1_api_handler()                                            */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : API interrupt handler, multiplexed for:       */
/*               1) audio sources: MP3 or AAC                 */
/*               2) modem sources: USF                         */
/*                                                             */
// The API Interrupt is multiplexed between (DYN DWNLD, MP3 ,AAC) and FAST USF. 
// DYN DWNLD, MP3 and AAC are mutually exclusive and hence only one would be
// active at one time. But FAST USF would co-exist with any of the them and hence
// there needs to be a way to distinguish the two sources of the API Interrupt. A flag
// d_dsp_hint_flag is used by the DSP to signify the source of the interrupt. The bit 
// configuration of d_dsp_hint_flag is 
// 15 14 13 12 | 11 10 9 8 | 7 6 5 4 | 3 2 1 0 
//                                                                 | |____> Fast USF
//                                                                 |______> (DYN DWNLD, MP3, AAC)


void l1_api_handler()
{
#if (FF_L1_IT_DSP_USF == 1) || (FF_L1_IT_DSP_DTX == 1) || (FF_L1_FAST_DECODING == 1)
extern NU_HISR api_modemHISR;
#endif

#if ( (L1_MP3 == 1) || (L1_AAC == 1) || (L1_MIDI == 1) || (L1_DYN_DSP_DWNLD == 1) )
  extern NU_HISR apiHISR;
#endif

#if (FF_L1_IT_DSP_USF == 1) || (FF_L1_IT_DSP_DTX == 1) || (FF_L1_FAST_DECODING == 1)
#if (FF_L1_FAST_DECODING == 1)  
 if (l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag & (1 << B_FAST_DECODING_FLAG))
  {
    // Flag HISR to be scheduled
    l1a_apihisr_com.fast_decoding.pending = TRUE;
    // Clear API ISR condition
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag &= ~(1 << B_FAST_DECODING_FLAG);
    l1a_apihisr_com.fast_decoding.crc_error = 
            l1s_dsp_com.dsp_ndb_ptr->d_fast_paging_data & (C_FAST_DECODING_CRC_FIRE1);
    NU_Activate_HISR(&api_modemHISR);  // activate API modem HISR
  }
#endif /* FF_L1_FAST_DECODING */  
#if (FF_L1_IT_DSP_USF == 1) 
   if (l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag & (1 << B_USF_HINT_ISSUED))
  {
    // Flag HISR to be scheduled
    l1a_apihisr_com.usf.pending = TRUE;
    // Clear API ISR condition
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag &= ~(1 << B_USF_HINT_ISSUED);
    NU_Activate_HISR(&api_modemHISR);  // activate API modem HISR
  }
#endif //(FF_L1_IT_DSP_USF == 1) 
#if (FF_L1_IT_DSP_DTX == 1)
  
  if ((l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag & 0x4 ) != 0) // DTX interrupt set by 3rd bit position from left
  {
    // Flag HISR to be scheduled
     l1a_apihisr_com.dtx.pending = TRUE;
    // Clear API ISR condition
    
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_hint_flag &= 0xFB; //reset the 3rd bit position
    NU_Activate_HISR(&api_modemHISR);  // activate API modem HISR
  }
#endif //(FF_L1_IT_DSP_DTX == 1) 
// Call the API HISR when MP3, AAC, DYN DWNLD comes
#if ( (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) )




   if (l1s_dsp_com.dsp_ndb_ptr->d_dsp_aud_hint_flag & (1 << B_NON_USF_HINT_ISSUED))
  {   
    // Clear API ISR condition
    l1s_dsp_com.dsp_ndb_ptr->d_dsp_aud_hint_flag = 0;
    //Activate the API HISR
  NU_Activate_HISR(&apiHISR);
  }
#endif // (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_DYN_DSP_DWNLD == 1)
#endif //(FF_L1_IT_DSP_USF == 1) || //(FF_L1_IT_DSP_DTX == 1)

#if 0	/* FreeCalypso Frankenstein */
/* This is the original LoCosto code */

//When Fast USF is not enabled, then the API HISR needs to be called every time the DSP 
//sends a HINT interrupt.
#if (!FF_L1_IT_DSP_USF) && (!FF_L1_IT_DSP_DTX)
#if ( (L1_MP3 == 1) || (L1_MIDI == 1) || (L1_AAC == 1) || (L1_DYN_DSP_DWNLD == 1) )
NU_Activate_HISR(&apiHISR); 
#endif
#endif
//NU_Activate_HISR(&apiHISR); //hack remove
  return;

#else

/* reconstruction of what the TCS211 code was probably like */
#if (L1_DYN_DSP_DWNLD == 1)
  if( l1_apihisr.dyn_dwnld.running == TRUE )
  {
    NU_Activate_HISR(&apiHISR); 
  }
#endif

#endif
}

/*-------------------------------------------------------------*/
/* api_hisr()                                                  */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : main function dealing with DSP->MCU interrupt */
/*                                                             */
/*-------------------------------------------------------------*/
void api_hisr(void)
{
#if (L1_MP3 == 1)
  if(l1a_apihisr_com.mp3.running==TRUE)
  {
    l1mp3_apihisr();
  }
#endif
#if (L1_MIDI == 1)
  if(l1_apihisr.midi.running==TRUE)
  {
    l1midi_apihisr();
  }
#endif
#if (L1_AAC == 1)
  if(l1a_apihisr_com.aac.running==TRUE)
  {
    l1aac_apihisr();
  }
#endif
#if (L1_DYN_DSP_DWNLD == 1)
  if( l1_apihisr.dyn_dwnld.running == TRUE )
  {
    l1_dyn_dwnld_apihisr();
  }
#endif

}

#if 0	/* FreeCalypso */
/*-------------------------------------------------------------*/
/* api_modem_hisr()                                            */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : main function dealing with DSP->MCU interrupt */
/*                                                             */
/*-------------------------------------------------------------*/
void api_modem_hisr(void)
{
#if (FF_L1_FAST_DECODING == 1)
if(l1a_apihisr_com.fast_decoding.pending == TRUE)
  {
    extern void l1_fast_decoding_apihisr(void);
    l1_fast_decoding_apihisr();
  }

#endif /* FF_L1_FAST_DECODING */  
#if (FF_L1_IT_DSP_USF == 1)
  if(l1a_apihisr_com.usf.pending == TRUE)
  {
    extern void l1usf_apihisr(void);
    l1usf_apihisr();
  }
#endif
#if (FF_L1_IT_DSP_DTX == 1)
  if(l1a_apihisr_com.dtx.pending == TRUE)
  {
    extern void l1dtx_apihisr(void);
    l1dtx_apihisr();
  }
#endif
}
#endif	/* FreeCalypso */

/*-------------------------------------------------------------*/
/* l1_trigger_api_interrupt()                                  */
/*-------------------------------------------------------------*/
/*                                                             */
/* Parameters : none                                           */
/*                                                             */
/* Return     : n/a                                            */
/*                                                             */
/* Description : Trigger an MCU->DSP interrupt                 */
/*                                                             */
/*-------------------------------------------------------------*/
void l1_trigger_api_interrupt()
{
#if (CODE_VERSION == SIMULATION)
  extern void sim_it_mcu_to_dsp();
  sim_it_mcu_to_dsp();
#else
#if (L1_DYN_DSP_DWNLD == 1)
  *((volatile UWORD32 *)MEM_APIC_REG)|=ID_API_INT;
#else
  *((volatile UWORD32 *)MEM_APIC_REG)|=0x4;
#endif
#endif

}