view src/cs/layer1/tm_cfile/l1tm_stats.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_STAT.C
 *
 *        Filename l1tm_stats.c
 *  Copyright 2003 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/

#include "l1_macro.h"
#include "l1_confg.h"

#if TESTMODE

  #include <string.h>
  #include "l1_types.h"
  #include "sys_types.h"
  #include "l1_const.h"
  #include "l1_time.h"
  #include "l1_signa.h"

  #include "l1tm_defty.h"
  
  #if (AUDIO_TASK == 1)
    #include "l1audio_const.h"
    #include "l1audio_cust.h"
    #include "l1audio_defty.h"
  #endif

  #if (L1_GTT == 1)
    #include "l1gtt_const.h"
    #include "l1gtt_defty.h"
  #endif

  #if (L1_MP3 == 1)
    #include "l1mp3_defty.h"
  #endif

  #if (L1_MIDI == 1)
    #include "l1midi_defty.h"
  #endif

  #include "l1_defty.h"
  #include "cust_os.h"
  #include "l1_msgty.h"
  #include "l1_varex.h"
  #include "l1_proto.h"

  #include "l1tm_msgty.h"
  #include "l1tm_varex.h"

/***********************************************************************/
/*                           TESTMODE 3.X                              */
/***********************************************************************/

/* External function prototypes */
/*------------------------------*/
void l1tm_stats_read(T_TM_RETURN *tm_return, WORD16 type, UWORD16 bitmask);
void l1a_tmode_send_ul_msg(T_TM_RETURN *tm_ret);

/* Internal function prototypes */
/*------------------------------*/
void l1tm_stats_compute(UWORD32 pm, UWORD32 toa, UWORD32 snr, WORD16 angle);
void l1tm_stats_auto_result_reset_loops(void);
void l1tm_reset_rx_stats(void);


void l1tm_stats_fb_confirm (T_TMODE_FB_CON *prim, WORD32 test)
// loop management done in L1A state machine
{

  l1tm.tmode_stats.loop_count++;
  l1tm.tmode_stats.flag_recent = prim->fb_flag;

  if (prim->fb_flag)
  {
    l1tm.tmode_stats.flag_count++;
  }

  if (prim->fb_flag)
    // We only save stats from a SUCCESS (including PM)
  {
    #if (TOA_ALGO == 2)
      l1tm_stats_compute(prim->pm_fullres, ((prim->toa)<<2), prim->snr, prim->angle);
    #else
      l1tm_stats_compute(prim->pm_fullres, prim->toa, prim->snr, prim->angle);      
    #endif
  } 

  l1tm_stats_auto_result_reset_loops();
}

void l1tm_stats_sb_confirm (T_TMODE_NCELL_SYNC_IND *prim, WORD32 test)
// loop management done in L1A state machine
{

  l1tm.tmode_stats.loop_count++;
  l1tm.tmode_stats.flag_recent = prim->sb_flag;

  if (prim->sb_flag)
  {
    l1tm.tmode_stats.flag_count++;
    l1tm.tmode_stats.bsic = prim->bsic;
  }

  if (prim->sb_flag)
    // we only save stats from a SUCCESS (including PM)
  {
    #if (TOA_ALGO == 2)
      l1tm_stats_compute(prim->pm_fullres, ((prim->toa)<<2), prim->snr, prim->angle);
    #else
      l1tm_stats_compute(prim->pm_fullres, prim->toa, prim->snr, prim->angle);      
    #endif
  } 

  l1tm_stats_auto_result_reset_loops();
}

void l1tm_stats_bcch_confirm (T_TMODE_BCCHS_CON *prim)
// loop management done here after stats management
// (the only stat is pass/fail)
{

  l1tm.tmode_stats.loop_count++;

  if (prim->error_flag == FALSE)
  {
    l1tm.tmode_stats.flag_count++;
    l1tm.tmode_stats.flag_recent = 1;
    l1tm.tmode_stats.bsic = l1a_l1s_com.Scell_info.bsic;  
  }
  else
  {
    l1tm.tmode_stats.flag_recent = 0;
  }

  l1tm_stats_auto_result_reset_loops(); 
}

void l1tm_stats_tch_confirm (T_TMODE_TCH_INFO *prim) 
// loop management and stats management done here
{

  // Update statistics only if downlink task enabled: DL-only or DL+UL
  if((l1_config.tmode.rf_params.down_up & TMODE_DOWNLINK) &&
    l1_config.tmode.rf_params.tmode_continuous == TM_NO_CONTINUOUS)
  {
    l1tm.tmode_stats.loop_count++;

    // TCH statistics are based on (accumulated) bit errors
    // Stats are computed independently from the RXQUAL
    // Discard first 2 blocks of TCH => always wrong if start not on block boundary
    if (l1tm.tmode_stats.loop_count > 2)
    {
      l1tm.tmode_stats.qual_acc_full      += prim->qual_full;
      l1tm.tmode_stats.qual_nbr_meas_full += prim->qual_nbr_meas_full;
      // fixed point unsigned F9.7 format
      l1tm.tmode_stats.flag_count = (WORD32)(((l1tm.tmode_stats.qual_acc_full * 100)<<8)/(l1tm.tmode_stats.qual_nbr_meas_full));
    }

    l1tm.tmode_stats.flag_recent = 1;
    l1tm.tmode_stats.bsic = l1a_l1s_com.Scell_info.bsic;  

    l1tm_stats_compute(prim->pm_fullres, prim->toa, prim->snr, prim->angle);

    l1tm_stats_auto_result_reset_loops();

  }  // end if DL-only or DL+UL
}

void l1tm_stats_mon_confirm (T_TMODE_FB_CON *prim)
// loop management done in L1A state machine
{

  l1tm.tmode_stats.loop_count++;
  l1tm.tmode_stats.flag_recent = prim->fb_flag;

  if (prim->fb_flag)
  {
    l1tm.tmode_stats.flag_count++;
  }

  if (prim->fb_flag)
    // we only save stats from a SUCCESS (including PM)
  {
    l1tm_stats_compute(prim->pm_fullres, prim->toa, prim->snr, prim->angle);
  }

  l1tm_stats_auto_result_reset_loops();
} 

/*void l1tm_stats_ra_confirm (T_TMODE_RA_DONE *prim)
// this function is only called when the RACH test is done
{
  //l1tm.tmode_stats.fn = prim->fn;

  l1tm.tmode_state.dedicated_active = 0;
}*/

void l1tm_stats_full_list_meas_confirm(T_TMODE_RXLEV_REQ *prim)
{
  T_TM_RETURN tm_ret;
  WORD16 stats_type = 2; // recent stats
  UWORD16 stats_bitmask = 0x0003; // for power measurement force rxlev and pm


  l1tm.tmode_stats.rssi_recent = prim->power_array->accum_power_result;
  l1tm_stats_read(&tm_ret, stats_type, stats_bitmask);
  // above function sets tm_ret.status, tm_ret.result[], tm_ret.index, tm_ret.size

#if (ETM_PROTOCOL == 1)
  tm_ret.mid = ETM_RF;
#endif

  tm_ret.cid = STATS_READ;
  l1a_tmode_send_ul_msg(&tm_ret);
}

#if L1_GPRS
  void l1tm_stats_pdtch_confirm (T_TMODE_PDTCH_INFO *prim) 
  // loop management and stats management done here
{
  UWORD8 ts;
  UWORD8 bit_map = 0x80;

  l1tm.tmode_stats.loop_count++;
  l1tm.tmode_stats.bsic = l1a_l1s_com.Scell_info.bsic;

  // count the number of successes over all time slots allocated for stats within one block
  for (ts=0;ts<8;ts++)
  {
    if (bit_map & l1_config.tmode.stats_config.stat_gprs_slots)
    {
      // if crc_error[ts]=FALSE the block is decoded successfully
      if (!prim->crc_error_tbl[ts])
        l1tm.tmode_stats.flag_count ++;
    }
    bit_map>>=1;
  }

  // TM stats are collected over one block (4 frames)
  l1tm_stats_compute(prim->pm_fullres, prim->toa, prim->snr, prim->angle);

  l1tm_stats_auto_result_reset_loops();

}
#endif

void l1tm_stats_compute(UWORD32 pm, UWORD32 toa, UWORD32 snr, WORD16 angle)
{
  // PM STATS
  l1tm.tmode_stats.pm_recent     = pm;
  l1tm.tmode_stats.pm_sum       += pm;
  l1tm.tmode_stats.pm_sq_sum    += (pm*pm);

  // TOA STATS
  l1tm.tmode_stats.toa_recent    = toa;
  l1tm.tmode_stats.toa_sum      += toa;
  l1tm.tmode_stats.toa_sq_sum   += (toa*toa);

  // ANGLE STATS
  l1tm.tmode_stats.angle_recent  = angle;
  l1tm.tmode_stats.angle_sum    += angle;
  l1tm.tmode_stats.angle_sq_sum += (angle*angle);
  if (angle < l1tm.tmode_stats.angle_min )
  {
    l1tm.tmode_stats.angle_min   = angle;
  }
  if (angle > l1tm.tmode_stats.angle_max )
  {
    l1tm.tmode_stats.angle_max   = angle;
  }

  // SNR STATS
  l1tm.tmode_stats.snr_recent    = snr;
  l1tm.tmode_stats.snr_sum      += snr;
  l1tm.tmode_stats.snr_sq_sum   += (snr*snr);
}

void l1tm_stats_auto_result_reset_loops(void)
{
  T_TM_RETURN tm_ret;

  if (l1_config.tmode.stats_config.auto_result_loops)
  {
    if ( (l1tm.tmode_stats.loop_count % l1_config.tmode.stats_config.auto_result_loops) == 0)
      // time to report current stats.  call l1tm_stats_read 
    {
      l1tm_stats_read(&tm_ret, l1_config.tmode.stats_config.stat_type, l1_config.tmode.stats_config.stat_bitmask);
      // above function sets tm_ret.status, tm_ret.result[], tm_ret.index, tm_ret.size

    #if (ETM_PROTOCOL == 1)
      tm_ret.mid = ETM_RF;
    #endif

      tm_ret.cid = STATS_READ;
      l1a_tmode_send_ul_msg(&tm_ret);
    }
  }

  if (l1_config.tmode.stats_config.auto_reset_loops)
  {
    if ((l1tm.tmode_stats.loop_count % l1_config.tmode.stats_config.auto_reset_loops) == 0)
      // time to reset stats.
    {
      l1tm_reset_rx_stats();
      // resets stats accumulators and success/runs counters but not master loop counter for task.
    }
  }
}

/****************************************************************************
    Function:  l1tm_is_rx_counter_done
    Input:     none
    Output:    1 = done;
               0 = not done.

    Checks to see if the RX loop should be stopped, and increments counter.
    This counter is used in all RX functions.
*****************************************************************************/
BOOL l1tm_is_rx_counter_done(void)
// another T_TM_RETURN allocated here for auto acknowledge of rf_enable operation.
// to help save stack we could pass in a pointer to the tm_return structure,
// then save the current values
{
  T_TM_RETURN_ABBREV tm_ret;

  if (l1_config.tmode.stats_config.num_loops != 0) // 0 = infinite loop
  {
    l1tm.tmode_state.rx_counter++;
    if (l1tm.tmode_state.rx_counter >= l1_config.tmode.stats_config.num_loops)
    {
      // acknowledge end of RF_ENABLE operation

      tm_ret.cid       = RF_ENABLE;
      tm_ret.index     = 0;  //  No index value is sent
      tm_ret.status    = E_FINISHED;

      tm_ret.size      = 1;
      tm_ret.result[0] = 1;
      l1a_tmode_send_ul_msg((T_TM_RETURN *) &tm_ret);

      return 1;
    }
    else
    {
      return 0; 
    }
  }
  else // infinite loop
  {
    return 0;
  }
}

void l1tm_reset_rx_state(void)
{
  l1tm.tmode_state.rx_counter = 0;
  l1tm.tmode_state.num_bcchs  = 0;
}

void l1tm_reset_rx_stats(void)
{
  UWORD32 i;

  l1tm.tmode_stats.toa_sum       = 0;
  l1tm.tmode_stats.toa_sq_sum    = 0;
  l1tm.tmode_stats.toa_recent    = 0;
  l1tm.tmode_stats.rssi_recent   = 0;
  l1tm.tmode_stats.pm_sum        = 0;
  l1tm.tmode_stats.pm_sq_sum     = 0;
  l1tm.tmode_stats.pm_recent     = 0;
  l1tm.tmode_stats.angle_sum     = 0;
  l1tm.tmode_stats.angle_sq_sum  = 0;
  l1tm.tmode_stats.angle_min     = +32767;
  l1tm.tmode_stats.angle_max     = -32768;
  l1tm.tmode_stats.angle_recent  = 0;
  l1tm.tmode_stats.snr_sum       = 0;
  l1tm.tmode_stats.snr_sq_sum    = 0;
  l1tm.tmode_stats.snr_recent    = 0;
  l1tm.tmode_stats.loop_count    = 0;
  l1tm.tmode_stats.flag_count    = 0;
  l1tm.tmode_stats.fn            = 0;
  l1tm.tmode_stats.bsic          = 0;
  l1tm.tmode_stats.qual_acc_full = 0;
  l1tm.tmode_stats.qual_nbr_meas_full = 0;

  for (i=0;i<4;i++)
    l1tm.tmode_stats.rssi_fifo[i] = 0;

#if L1_GPRS
 l1tm.tmode_stats.nb_dl_pdtch_slots = 0;
#if 0	/* FreeCalypso TCS211 reconstruction: LoCosto-ism removed */
// Stats Bler
l1tm.tmode_stats.bler_total_blocks = 0;
  for (i=0;i<4;i++)
       l1tm.tmode_stats.bler_crc[i] = 0;
#endif
#endif
}


#endif