FreeCalypso > hg > fc-tourmaline
view src/cs/riviera/rvm/rvm_pool_size.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/** * @file rvm_pool_size.h * * Declarations of: * - the memory bank sizes and their watermark * - the SWE stack size * - the pool size needed (generally the sum of memory bank and stack sizes) * * @author Vincent Oberle * @version 0.1 */ /* * History: * * Date Author Modification * ------------------------------------------------------------------- * 07/08/2003 Vincent Oberle Extracted from rvf_pool_size.h * 17/09/2003 Gary Totney Calibrated MB3 for 30 tasks * * * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef __RVM_POOL_SIZE_H_ #define __RVM_POOL_SIZE_H_ #ifndef _WINDOWS #include "rv.cfg" // TEST #include "debug.cfg" // TI_PROFILER, TI_NUC_MONITOR #include "board.cfg" // BOARD #include "swconfig.cfg" // GSMLITE #endif /* * RVM SWE; This SWE is of course always enabled. * * Values used in rvm_i.h */ #define RVF_RVM_STACK_SIZE (1500) #if (defined BLUETOOTH) || (TEST==1) || (TI_PROFILER == 1) || (TI_NUC_MONITOR == 1) #define RVF_RVM_MB1_SIZE (13000) #else #if (GSMLITE) #define RVF_RVM_MB1_SIZE (1200) #else #define RVF_RVM_MB1_SIZE (6000) #endif #endif #define RVF_RVM_MB2_SIZE (700) #if (GSMLITE) #define RVF_RVM_MB3_SIZE (3200) #define RVF_RVM_MB4_SIZE (0) #define RVF_RVM_MB5_SIZE (0) #define RVF_RVM_COMPENSATOR_POOL_SIZE (1000) #else #define RVF_RVM_MB3_SIZE (9000) #define RVF_RVM_MB4_SIZE (3000) #define RVF_RVM_MB5_SIZE (3000) #define RVF_RVM_COMPENSATOR_POOL_SIZE (12500+3000) #endif #define RVF_RVM_POOL_SIZE (RVF_RVM_STACK_SIZE + RVF_RVM_MB1_SIZE + \ RVF_RVM_MB2_SIZE + RVF_RVM_MB3_SIZE + \ RVF_RVM_MB4_SIZE + RVF_RVM_MB5_SIZE +\ RVF_RVM_COMPENSATOR_POOL_SIZE ) #endif /*__RVM_POOL_SIZE_H_*/