FreeCalypso > hg > fc-tourmaline
view src/g23m-gsm/rr/cnf_rr.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Dynamic Configuration for Radio Resource +----------------------------------------------------------------------------- */ #ifndef CNF_RR_H #define CNF_RR_H /*==== CONSTANTS ==================================================*/ /* * CONFIGURATION PARAMETER * * Description : The constants define the commands for dynamic * configuration proposals. */ #define RR_TIMER_SET "TIMER_SET" #define RR_TIMER_RESET "TIMER_RESET" #define RR_TIMER_SPEED_UP "TIMER_SPEED_UP" #define RR_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN" #define RR_TIMER_SUPPRESS "TIMER_SUPPRESS" #define RR_NO_SYS_TIME "NO_SYS_TIME" #define RR_SET_LAST_USED_SC "SET_LAST_USED_SC" #define RR_INIT_FFS "INIT_FFS" #define RR_WRITE_FFS "WRITE_FFS" #define RR_FCR "FCR" #define RR_IHO "IHO" #define RR_SCR "SCR" #define RR_DLE "DLE" #define RR_FCA "FCA" #define RR_FRL "FRL" #define RR_FHO "FHO" #define RR_GSM_OFFSET "GSM_OFFSET" #define RR_DCS_OFFSET "DCS_OFFSET" #define RR_CTO "CTO" #define RR_NKC "NKC" #define RR_MT_CALL_NAME "MTC" #define RR_MT_SMS_0_NAME "MT_SMS_0" #define RR_MT_SMS_2_NAME "MT_SMS_2" #define RR_SRV_FULL_NAME "FULL_SERVICE" #define RR_SRV_LIM_NAME "LIMITED_SERVICE" #define RR_SRV_NO "NO_SERVICE" #define RR_PSEUDO_SYNC_HO "PSEUDO_SYNC_HO" #define RR_PCM "PCM" #define RR_DCS_PCLASS_3 "DCS_PCLASS_3" #define RR_RESTRICTED_BAND "SET_BAND" #define RR_MULTISLOT_CLASS "MULTISLOT_CLASS" #define RR_CMSP "CMSP" #define RR_ERASE_BL "ERASE_BL" #define RR_ERASE_WL "ERASE_WL" #define RR_SET_WL "SET_WL" #define RR_SET_WL_PLMN "SET_WL_PLMN" #define RR_SET_BL "SET_BL" #define RR_SET_WL_REGION "SET_WL_REGION" #define RR_SHOW_BL "SHOW_BL" #define RR_SHOW_WL "SHOW_WL" #define RR_SET_NPS_DELAY "SET_NPS_DELAY" #if defined(_TARGET_) #define RR_FFS_CHECK "FFS_CHECK" #endif /* _TARGET_ */ #define RR_SCS "SCS" #define RR_SHIELD "SHIELD" #define RR_BL_CS "BL_CS" #define RR_U_RXT "U_RXT" #define RR_M_RXT "M_RXT" #define RR_L_RXT "L_RXT" #define RR_TFAST_CS "TIM_FAST" #define RR_TNORMAL_CS "TIM_NORMAL" #define RR_FBLS "FBLS" /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ #endif