FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/pwr/pwr_analog_dev.h @ 274:fa22012c4a39
CST: remove AT%Nxxxx old AEC control
This crude method of enabling and configuring AEC is not compatible
with L1_NEW_AEC, and even for the old AEC it did not support every
possible combination. It is time for this hack to go. The new and
proper way of enabling and configuring AEC is via RiViera Audio Service
audio mode facility, either audio mode files or full access write,
most directly accessible via fc-tmsh auw 12 for free experimentation.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 29 Jul 2021 18:57:36 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/******************************************************************************* * * pwr_analog_dev.h * * Purpose: This file contains definitions that can be used by any SWE * for power management services. * * Author Candice Bazanegue (c-brille@ti.com) * * (C) Texas Instruments 2001 * ******************************************************************************/ #ifndef __PWR_ANALOG_DEV_H__ #define __PWR_ANALOG_DEV_H__ #ifndef _WINDOWS #include "chipset.cfg" #endif /* Constants relative to the analog device */ #if (ANLG_FAM == 1) #define VOLTAGE_LOOP_OFFSET 400 /* (mV) measured */ #define MADC_OFFSET 160 /* (mV) measured */ #define DAC_THRESHOLD 240 /* (mV) spec */ #define DAC_VOLTAGE_STEP 1875 /* (uV) spec */ #define DAC_CURRENT_STEP 937 /* (uA) */ #define MADC_VOLTAGE_STEP 1710 /* (uV) spec */ #define MADC_CURRENT_STEP 855 /* (uA) spec */ #elif (ANLG_FAM == 2) #define VOLTAGE_LOOP_OFFSET 200 /* (mV) measured */ #define MADC_OFFSET 160 /* (mV) measured */ #define DAC_THRESHOLD 0 /* (mV) spec */ #define DAC_VOLTAGE_STEP 1710 /* (uV) spec */ #define DAC_CURRENT_STEP 855 /* (uA) */ #define MADC_VOLTAGE_STEP 1710 /* (uV) spec */ #define MADC_CURRENT_STEP 855 /* (uA) spec */ #endif // ANLG_FAM #endif /* __PWR_ANALOG_DEV_H__ */