FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/sim/sim.h @ 274:fa22012c4a39
CST: remove AT%Nxxxx old AEC control
This crude method of enabling and configuring AEC is not compatible
with L1_NEW_AEC, and even for the old AEC it did not support every
possible combination. It is time for this hack to go. The new and
proper way of enabling and configuring AEC is via RiViera Audio Service
audio mode facility, either audio mode files or full access write,
most directly accessible via fc-tmsh auw 12 for free experimentation.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 29 Jul 2021 18:57:36 +0000 |
| parents | 2e4afc93045d |
| children |
line wrap: on
line source
/* * SIM.H * * Pole Star SIM * * Target : ARM * * Copyright (c) Texas Instruments 1995-1997 * */ /* * Device addresses - GCS000 (Gemini / Polestar) * HER207 (Hercules) */ #ifndef _WINDOWS #include "l1sw.cfg" #include "chipset.cfg" #endif #include "nucleus.h" /* Flags activation section */ //#define SIM_RETRY /* by default : NOT ACTIVE */ //#define SIM_DEBUG_TRACE /* by default : NOT ACTIVE */ //#define SIM_UWORD16_MASK 0x00ff //when using SIM entity not maped to length on 16 bits #define SIM_UWORD16_MASK 0xffff //when using SIM entity maped to length on 16 bits //#define SIM_APDU_TEST //#define SIM_SAT_REFRESH_TEST #define SIM_CMD (MEM_SIM + 0x00) #define SIM_STAT (MEM_SIM + 0x02) #define SIM_CONF1 (MEM_SIM + 0x04) #define SIM_CONF2 (MEM_SIM + 0x06) #define SIM_IT (MEM_SIM + 0x08) #define SIM_DRX (MEM_SIM + 0x0A) #define SIM_DTX (MEM_SIM + 0x0C) #define SIM_MASK (MEM_SIM + 0x0E) /* * Bit definitions */ // control regidter #define SIM_CMD_CRST 0x0001 #define SIM_CMD_SWRST 0x0002 #define SIM_CMD_STOP 0x0004 #define SIM_CMD_START 0x0008 #define SIM_CMD_CLKEN 0x0010 // status register #define SIM_STAT_CD 0x0001 // card present #define SIM_STAT_TXPAR 0x0002 // transmit parity status #define SIM_STAT_FFULL 0x0004 // fifo full #define SIM_STAT_FEMPTY 0x0008 // fifo empty // configuration register #define SIM_CONF1_CHKPAR 0x0001 // enable receipt check parity #define SIM_CONF1_CONV 0x0002 // coding convention #define SIM_CONF1_TXRX 0x0004 // SIO line direction #define SIM_CONF1_SCLKEN 0x0008 // enable SIM clock #define SIM_CONF1_RSVD 0x0010 // reserved #define SIM_CONF1_SCLKDIV 0x0020 // SIM clock frquency #define SIM_CONF1_SCLKLEV 0x0040 // SIM clock idle level #define SIM_CONF1_ETU 0x0080 // ETU period #define SIM_CONF1_BYPASS 0x0100 // bypass hardware timers #define SIM_CONF1_SVCCLEV 0x0200 #define SIM_CONF1_SRSTLEV 0x0400 #define SIM_CONF1_SIOLOW 0x8000 //force SIO to low level // interrupt status register #define SIM_IT_NATR 0x0001 // No answer to reset #define SIM_IT_WT 0x0002 #define SIM_IT_ITOV 0x0004 #define SIM_IT_ITTX 0x0008 // Transmit #define SIM_IT_ITRX 0x0010 // Receipt #if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) #define SIM_IT_CD 0x0001 // Card insertion/extraction #else #define SIM_IT_CD 0x0020 // Card insertion/extraction #endif // interrupt mask register #define SIM_MASK_NATR 0x0001 // No answer to reset #define SIM_MASK_WT 0x0002 #define SIM_MASK_OV 0x0004 #define SIM_MASK_TX 0x0008 // Transmit #define SIM_MASK_RX 0x0010 // Receipt #define SIM_MASK_CD 0x0020 // Card insertion/extraction // receveid byte register #define SIM_DRX_STATRXPAR 0x0100 // received byte parity status // SIM return code OK #define SIM_OK 0 // SIM return error codes #define SIM_ERR_NOCARD 1 #define SIM_ERR_NOINT 2 #define SIM_ERR_NATR 3 #define SIM_ERR_READ 4 #define SIM_ERR_XMIT 5 #define SIM_ERR_OVF 6 #define SIM_ERR_LEN 7 #define SIM_ERR_CARDREJECT 8 #define SIM_ERR_WAIT 9 #define SIM_ERR_ABNORMAL_CASE1 10 #define SIM_ERR_ABNORMAL_CASE2 11 #define SIM_ERR_BUFF_OVERFL 12 // begin of JYT modifications #define SIM_ERR_HARDWARE_FAIL 13 // end of JYT modifications #define SIM_ERR_RETRY_FAILURE 14 #define SIM_SLEEP_NONE 0 // No SIM available #define SIM_SLEEP_DESACT 1 // The Driver is NOT currently in sleep mode (clock is off) #define SIM_SLEEP_ACT 2 // The Driver is currently in sleep mode (clock is on) #define SIM_SLEEP_NOT_ALLOWED 3 // The Driver cannot stop the clock : // The card don't want or the interface is not able // to do it. #define SIM_SLEEP_WAITING_TIME 500 //represent 2.3s of period before entering in sleep mode #define SIM_CLK_STOP_MASK 0x0D // Clock Stop mask defined by ETSI 11.11 #define SIM_CLK_STOP_NOT_ALLWD 0x00 // see ETSI 11.11 : Clock Stop never allowed #define SIM_CLK_STOP_ALLWD 0x01 // see ETSI 11.11 : No prefered level #define SIM_CLK_STOP_HIGH 0x04 // see ETSI 11.11 : High level only #define SIM_CLK_STOP_LOW 0x08 // see ETSI 11.11 : Low level only #if(ANLG_FAM == 1) //OMEGA specific definitions #define MODE5V_OMEGA 0x06 // used in SIM_SwitchVolt #define MODE_INIT_OMEGA_3V 0x05 // used in SIM_StartVolt #define MODE_INIT_OMEGA_5V 0x07 // unused !!!! #define MODE3V_OMEGA 0x01 // unused !!!! #define MODE_DIS_SIMLDOEN 0xDF // used in SIM_PowerOff #define MODE_DIS_SIMEN 0xFD // used in SIM_PowerOff #define MODE_ENA_SIMLDOEN 0x20 // used in SIM_ManualStart #define MODE_ENA_SIMEN 0x02 // used in SIM_ManualStart #elif(ANLG_FAM == 2) //IOTA specific definitions #define MODE1_8V_IOTA 0x00 #define MODE_INIT_IOTA_3V 0x03 #define MODE_INIT_IOTA_1_8V 0x02 #define MODE3V_IOTA 0x01 #define MODE_DIS_SIMLDOEN 0xFC // SIMSEL + Regulator RSIMEN #define MODE_DIS_SIMEN 0xF7 #define MODE_ENA_SIMLDOEN 0x03 // SIMSEL + Regulator RSIMEN #define MODE_ENA_SIMEN 0x08 #elif(ANLG_FAM == 3) //SYREN specific definitions #define MODE1_8V_SYREN 0x00 #define MODE_INIT_SYREN_3V 0x03 #define MODE_INIT_SYREN_1_8V 0x02 #define MODE3V_SYREN 0x01 #define MODE_DIS_SIMLDOEN 0x1FC // SIMSEL + Regulator RSIMEN #define MODE_DIS_SIMEN 0x1F7 #define MODE_ENA_SIMLDOEN 0x03 // SIMSEL + Regulator RSIMEN #define MODE_ENA_SIMEN 0x08 #endif // define type of interface if not defined // 5V only ME SIM_TYPE = 0 // 3V technology ME SIM_TYPE = 1 // 3V only ME SIM_TYPE = 2 // 1.8V technology ME SIM_TYPE = 3 // JYT, 29/01/02, from new specs IOTA // 1.8V Only ME SIM_TYPE = 4 // JYT, 29/01/02, from new specs IOTA #define SIM_TYPE_5V 0 #define SIM_TYPE_3_5V 1 #define SIM_TYPE_3V 2 #define SIM_TYPE_1_8_3V 3 #define SIM_TYPE_1_8V 4 //default configuration #ifndef SIM_TYPE #if((ANLG_FAM == 2) || (ANLG_FAM == 3)) // Until now (20/03/2003), it is impossible to test IOTA or SYREN with 1.8V Sim Card, // so SIM drv is configured in 3V only with IOTA.and SYREN // When 1.8V Sim Card will be delivered and tested on IOTA and SYREN, then Sim driver will pass // to : #define SIM_TYPE SIM_TYPE_1_8_3V #define SIM_TYPE SIM_TYPE_1_8_3V // MODIFY BY JENNIFER SIM_TYPE_3V #else #define SIM_TYPE SIM_TYPE_3_5V #endif #endif // begin of modifications of JYT #if((ANLG_FAM == 2) || (ANLG_FAM == 3)) #define SIM_MASK_INFO_VOLT 0x70 #else #define SIM_MASK_INFO_VOLT 0x10 #endif #define SIM_1_8V 0x30 #define SIM_3V 0x10 #define SIM_5V 0x00 // end of modifications of JYT // Max size of Answer to Reset (GSM11.11 5.7.1) #define MAX_ATR_SIZE 33 // GSM Instruction Class (GSM 11.11 SIM spec) #define GSM_CLASS 0xA0 // SIM Instruction Codes #define SIM_SELECT 0xA4 #define SIM_STATUS 0xF2 #define SIM_READ_BINARY 0xB0 #define SIM_UPDATE_BINARY 0xD6 #define SIM_READ_RECORD 0xB2 #define SIM_UPDATE_RECORD 0xDC #define SIM_SEEK 0xA2 #define SIM_INCREASE 0x32 #define SIM_VERIFY_CHV 0x20 #define SIM_CHANGE_CHV 0x24 #define SIM_DISABLE_CHV 0x26 #define SIM_ENABLE_CHV 0x28 #define SIM_UNBLOCK_CHV 0x2C #define SIM_INVALIDATE 0x04 #define SIM_REHABILITATE 0x44 #define SIM_RUN_GSM_ALGO 0x88 #define SIM_GET_RESPONSE 0xC0 #define SIM_TERMINAL_PROFILE 0x10 #define SIM_FETCH 0x12 #define SIM_TERMINAL_RESPONSE 0x14 #define SIM_ENVELOPE 0xC2 // SIM file identifiers #define MF 0x3F00 #define EF_ICCID 0x2FE2 #define DF_GSM 0x7F20 #define DF_DCS1800 0x7F21 #define EF_LP 0x6F05 #define EF_IMSI 0x6F07 #define EF_KC 0x6F20 #define EF_PLMNSEL 0x6F30 #define EF_HPLMN 0x6F31 #define EF_ACMAX 0x6F37 #define EF_SST 0x6F38 #define EF_ACM 0x6F39 #define EF_PUCT 0x6F41 #define EF_CBMI 0x6F45 #define EF_BCCH 0x6F74 #define EF_ACC 0x6F78 #define EF_FPLMN 0x6F7B #define EF_LOCI 0x6F7E #define EF_AD 0x6FAD #define EF_PHASE 0x6FAE #define DF_TELECOM 0x7F10 #define EF_ADN 0x6F3A #define EF_FDN 0x6F3B #define EF_SMS 0x6F3C #define EF_CCP 0x6F3D #define EF_MSISDN 0x6F40 #define EF_SMSP 0x6F42 #define EF_SMSS 0x6F43 #define EF_LND 0x6F44 #define EF_EXT1 0x6F4A #define EF_EXT2 0x6F4B #define EF_ECC 0x6FB7 #define MASK_INS 0xFE #define MASK_CMD 0x11 #define MASK_RST 0x10 // Buffer sizes #define RSIMBUFSIZE 270 #define RSIZESW1SW2 2 #define XSIMBUFSIZE 270 // Structures typedef struct { volatile unsigned short cmd; volatile unsigned short stat; volatile unsigned short conf1; volatile unsigned short conf2; volatile unsigned short it; volatile unsigned short rx; volatile unsigned short tx; volatile unsigned short maskit; #if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) volatile unsigned short it_cd; #endif } SIM_CONTROLLER; typedef struct { SYS_UWORD8 Inverse; SYS_UWORD8 AtrSize; SYS_UWORD8 AtrData[MAX_ATR_SIZE]; } SIM_CARD; typedef struct { SIM_CONTROLLER *c; SYS_UWORD8 *xIn; // xmit input pointer SYS_UWORD8 *xOut; // xmit output pointer unsigned errorSIM; // code return in case of error detectd unsigned short conf1; // image of the configuration register - avoids read/mod/write cycles volatile unsigned short txParityErr; unsigned short rxParityErr; // if 0 no parity error on receipt, 1 if... SYS_UWORD8 Freq_Algo; //use to determine which sim clk freq to choose for running GSM algo SYS_UWORD8 PTS_Try; //use to calculate how many PTS try were already done SYS_UWORD8 FileC; //value of File Characteristic SYS_UWORD16 etu9600; SYS_UWORD16 etu400; SYS_UWORD16 startclock; //744 clock cycle translated in ETU SYS_UWORD16 stopclock; //1860 clock cycle translated in ETU SYS_UWORD8 moderx; //inform that we are in receive mode // 0 : mode of normal reception without procedure // 1 : mode of wait for acknowledge during reception of char // 2 : mode of reception of data by bloc // 3 : mode of reception of data char by char (proc char) // 4 : mode of reception of data char by char (data) // 5 : mode of reception of procedure char SW1/SW2 // 6 : mode of wait for acknowledge char after transmission of char SYS_UWORD16 expected_data; //number of expected char in receive mode proc char SYS_UWORD8 ack; //acknowledge char SYS_UWORD8 null_received; //indicates if a NULL char was received SYS_UWORD8 hw_mask; //mask used because of pole112 hw prb SYS_UWORD8 rbuf[RSIMBUFSIZE]; SYS_UWORD8 rx_index; // receive index on rbuf buffer SYS_UWORD8 xbuf[XSIMBUFSIZE]; SYS_UWORD8 rSW12[RSIZESW1SW2]; //buffer to store SW1 and SW2 SYS_UWORD8 SWcount; //static counter void (*InsertFunc)(SIM_CARD *); void (*RemoveFunc)(void); SYS_UWORD16 apdu_ans_length; } SIM_PORT; void SIM_IntHandler(void); #if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) void SIM_CD_IntHandler(void); #endif /* * Prototypes */ // obsolete function void SIM_Init(void (Insert(SIM_CARD *cP)), void (Remove(void))); // initialization void SIM_Initialize(void); SYS_UWORD16 SIM_Register(void (Insert(SIM_CARD *cP)), void (Remove(void))); SYS_UWORD16 SIM_Reset(SIM_CARD *cP); SYS_UWORD16 SIM_Restart(SIM_CARD *cP); // file commands SYS_UWORD16 SIM_Select(SYS_UWORD16 id, SYS_UWORD8 *dat, SYS_UWORD16 *size); SYS_UWORD16 SIM_Status(SYS_UWORD8 *dat, SYS_UWORD16 *size); SYS_UWORD16 SIM_ReadBinary(SYS_UWORD8 *dat, SYS_UWORD16 offset, SYS_UWORD16 len, SYS_UWORD16 *size); SYS_UWORD16 SIM_UpdateBinary(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 offset, SYS_UWORD16 len, SYS_UWORD16 *size); SYS_UWORD16 SIM_ReadRecord(SYS_UWORD8 *dat, SYS_UWORD8 mode, SYS_UWORD8 recNum, SYS_UWORD16 len, SYS_UWORD16 *size); SYS_UWORD16 SIM_UpdateRecord(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD8 mode, SYS_UWORD8 recNum, SYS_UWORD16 len, SYS_UWORD16 *size); SYS_UWORD16 SIM_Seek(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD8 mode, SYS_UWORD16 len, SYS_UWORD16 *size); SYS_UWORD16 SIM_Increase(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 *size); // Authentication SYS_UWORD16 SIM_VerifyCHV(SYS_UWORD8 *result, SYS_UWORD8 *chv, SYS_UWORD8 chvType, SYS_UWORD16 *size); SYS_UWORD16 SIM_ChangeCHV(SYS_UWORD8 *result,SYS_UWORD8 *oldChv, SYS_UWORD8 *newChv, SYS_UWORD8 chvType, SYS_UWORD16 *size); SYS_UWORD16 SIM_DisableCHV(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 *size); SYS_UWORD16 SIM_EnableCHV(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 *size); SYS_UWORD16 SIM_UnblockCHV(SYS_UWORD8 *result, SYS_UWORD8 *unblockChv, SYS_UWORD8 *newChv, SYS_UWORD8 chvType, SYS_UWORD16 *size); // managing SYS_UWORD16 SIM_Invalidate(SYS_UWORD8 *rP, SYS_UWORD16 *size); SYS_UWORD16 SIM_Rehabilitate(SYS_UWORD8 *rP, SYS_UWORD16 *size); SYS_UWORD16 SIM_RunGSMAlgo(SYS_UWORD8 *result, SYS_UWORD8 *rand, SYS_UWORD16 *size); SYS_UWORD16 SIM_GetResponse(SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *size); // STK SYS_UWORD16 SIM_TerminalProfile(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *rcvSize); SYS_UWORD16 SIM_Fetch(SYS_UWORD8 *result, SYS_UWORD16 len, SYS_UWORD16 *rcvSize); SYS_UWORD16 SIM_TerminalResponse(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *rcvSize); SYS_UWORD16 SIM_Envelope(SYS_UWORD8 *result, SYS_UWORD8 *dat, SYS_UWORD16 len, SYS_UWORD16 *rcvSize); // power off void SIM_PowerOff(void); // WIM SYS_UWORD16 SIM_XchTPDU(SYS_UWORD8 *dat, SYS_UWORD16 trxLen, SYS_UWORD8 *result, SYS_UWORD16 rcvLen, SYS_UWORD16 *rcvSize); void SIM_lock_cr17689(void); /* * Internal Prototypes */ void SIM_WriteBuffer(SIM_PORT *p, SYS_UWORD16 offset, SYS_UWORD16 n); SYS_UWORD16 SIM_Result(SIM_PORT *p, SYS_UWORD8 *rP, SYS_UWORD16 *lenP, SYS_UWORD8 offset); SYS_UWORD16 SIM_Command(SIM_PORT *p, SYS_UWORD16 n, SYS_UWORD8 *rP, SYS_UWORD16 *lP); SYS_UWORD16 SIM_Command_Base(SIM_PORT *p, SYS_UWORD16 n, SYS_UWORD8 *dP, SYS_UWORD16 *lP); SYS_UWORD16 SIM_Dummy(void); void SIM_InitLog(void); SYS_UWORD16 SIM_TxParityErrors(); SYS_UWORD16 SIM_WaitReception(SIM_PORT *p); void SIM_Interpret_FileCharacteristics(SIM_PORT *p); SYS_UWORD16 SIM_PTSprocedure(SIM_CARD *cP, SIM_PORT *p); void SIM_WARMReset (SIM_PORT *p); void SIM_SleepMode_In(SYS_UWORD32 param); void SIM_SleepMode_Out(SIM_PORT *p); SYS_UWORD8 SIM_GetFileCharacteristics(SIM_PORT *p); SYS_UWORD16 SIM_ATRdynamictreatement (SIM_PORT *p, SIM_CARD *cP); SYS_UWORD16 SIM_Waitforchars (SIM_PORT *p, SYS_UWORD16 max_wait); void SIM_Calcetu (SIM_PORT *p); SYS_UWORD8 SIM_Translate_atr_char (SYS_UWORD8 input, SIM_CARD *cP); SYS_UWORD8 SIM_StartVolt (SYS_UWORD8 ResetFlag); SYS_UWORD8 SIM_SwitchVolt (SYS_UWORD8 ResetFlag); SYS_UWORD16 SIM_ManualStart (SIM_PORT *p); SYS_UWORD8 SIM_Memcpy(SYS_UWORD8 *Buff_target, SYS_UWORD8 Buff_source[], SYS_UWORD16 len); SYS_BOOL SIM_SleepStatus(void); SYS_UWORD16 SIM_Reset_Restart_Internal(SIM_CARD *cP, SYS_UWORD8 ResetFlag); /* * Global variables */ #ifdef SIM_C #define SI_GLOBAL #else #define SI_GLOBAL extern #endif SI_GLOBAL SIM_PORT Sim[1]; SI_GLOBAL NU_TIMER SIM_timer; SI_GLOBAL STATUS status_os_sim; SI_GLOBAL SYS_UWORD8 SIM_sleep_status;