view cdg-hybrid/msg/sat.mdf @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

;********************************************************************************
;*** File           : sat.mdf
;*** Creation       : Thu Jun 19 15:32:13 CST 2008
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Air Interface Message Specification
;*** Document Name  : sat
;*** Document No.   : 6147.609.99.011
;*** Document Date  : 2003-02-25
;*** Document Status: BEING_PROCESSED
;*** Document Author: SBK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Wed Nov 28 10:21:04 2007"
PRAGMA 	LAST_MODIFIED 	"2003-02-25"
PRAGMA 	ID_AND_VERSION 	"6147.609.99.011"



CONST 	MAX_PARTY_NUM_SAT 	480 	; Maximum number length of a cld/clg party
CONST 	MAX_SUBADDR_NUM 	20 	; Maximum number length of a cld/clg party subaddress
CONST 	MAX_CH_DATA_LEN 	241 	; Maximum length of channel data string
CONST 	MAX_CMD_AT_LEN 	241 	; Maximum length of an AT command string
CONST 	MAX_ALPHA_ID_LEN 	241 	; Maximum bytelength of alpha identifier
CONST 	MAX_SS_STRING_LEN 	60 	; Maximum length of SS string
CONST 	MAX_SAT_USSD_LEN 	160 	; Maximum length of USSD string
CONST 	MAX_SMS_DIGIT_LEN 	20 	; Maximum number of digits in SMS addresses
CONST 	MAX_SMS_TPDU_LEN 	184 	; Maximum length of SMS SUBMIT or COMMAND
CONST 	MAX_CAP_CNF_LEN 	112 	; Maximum bitlength of capability configuration
CONST 	MAX_TEXT_LEN 	160 	; Maximum length of text (response to Send USSD)
CONST 	MAX_EVENT_LIST_LEN 	10 	; Maximum number of supported events
CONST 	MAX_TI_LEN 	16 	; Maximum number of different transaction identifier
CONST 	MAX_DTMF_LEN 	80 	; Maximum number of DTMF digits
CONST 	MAX_PROV_F_PATH_LEN 	16 	; Maximum number of supported paths
CONST 	MAX_BEARER_LIST_LEN 	253 	; Maximum list length of supported bearer
CONST 	MAX_CAUSE_LEN 	30 	; Maximum length of cause information element
CONST 	CCR_ALLW_NO_MDFY 	0x00 	; Allowed, no modification
CONST 	CCR_NOT_ALLW 	0x01 	; Not allowed
CONST 	CCR_ALLW_WITH_MDFY 	0x02 	; Allowed, with modification
CONST 	MAX_SAT_APN_LEN 	102 	; Maximum byte length of APN string
CONST 	MAX_URL_LEN 	253 	; Maximum length for URL
CONST 	MAX_PFP_ELEM 	10 	; Maximum provisioning file path elements



VALTAB 	VAL_cmd_typ
VAL 	0x01 	SAT_CMD_REFRESH 	"Refresh command"
VAL 	0x02 	SAT_CMD_MORE_TIME 	"More time command"
VAL 	0x03 	SAT_CMD_POLL_INTERVAL 	"Poll interval command"
VAL 	0x04 	SAT_CMD_POLL_OFF 	"Polling off command"
VAL 	0x05 	SAT_CMD_EVENT_LIST 	"Setup event list command"
VAL 	0x10 	SAT_CMD_SETUP_CALL 	"Set up call command"
VAL 	0x11 	SAT_CMD_SEND_SS 	"Send SS command"
VAL 	0x12 	SAT_CMD_SEND_USSD 	"Send USSD Command"
VAL 	0x13 	SAT_CMD_SEND_SMS 	"Send Short Message command"
VAL 	0x14 	SAT_CMD_SEND_DTMF 	"Send DTMF command"
VAL 	0x15 	SAT_CMD_LAUNCH_BROWSER 	"Launch WWW Browser class c"
VAL 	0x20 	SAT_CMD_PLAY_TONE 	"Play tone command"
VAL 	0x21 	SAT_CMD_DISPLAY_TEXT 	"Display text command"
VAL 	0x22 	SAT_CMD_GET_INKEY 	"Get inkey command"
VAL 	0x23 	SAT_CMD_GET_INPUT 	"Get input command"
VAL 	0x24 	SAT_CMD_SEL_ITEM 	"Select item command"
VAL 	0x25 	SAT_CMD_SETUP_MENU 	"Set up menu command"
VAL 	0x26 	SAT_CMD_PROV_LOC_INFO 	"Provide loacal information command"
VAL 	0x27 	SAT_CMD_TIMER_MNG 	"Timer Managemant command"
VAL 	0x28 	SAT_CMD_IDLE_TEXT 	"Set up idle mode text command"
VAL 	0x34 	SAT_CMD_RUN_AT 	"Run AT command"
VAL 	0x40 	SAT_CMD_OPEN_CHANNEL 	"Open data channel for CS or GPRS              class e"
VAL 	0x41 	SAT_CMD_CLOSE_CHANNEL 	"Close data channel                                  class e"
VAL 	0x42 	SAT_CMD_RECEIVE_DATA 	"Receive data from ME from the channel     class e"
VAL 	0x43 	SAT_CMD_SEND_DATA 	"Send the data to the channel via ME         class e"
VAL 	0x44 	SAT_CMD_GET_CHANNEL_STATUS 	"Get the status of the data channel opened class e"
VAL 	0x81 	SAT_CMD_END_SESSION 	"End of proactive session command"

VALTAB 	VAL_cmd_qlf
VAL 	0x00 	QLF_RFSH_INIT 	"Refresh: SIM initialization"
VAL 	0x01 	QLF_RFSH_INIT_FULL_CHNG_NTFY 	"Refresh: SIM initialization and full file change notification"
VAL 	0x02 	QLF_RFSH_FILE_CHNG_NTFY 	"Refresh: File change notification"
VAL 	0x03 	QLF_RFSH_INIT_FILE_CHNG_NTFY 	"Refresh: SIM initialization and file change notification"
VAL 	0x04 	QLF_RFSH_RESET 	"Refresh: SIM reset"
VAL 	0x00 	QLF_CALL_IDLE 	"Set up call: idle"
VAL 	0x01 	QLF_CALL_IDLE_RDL 	"Set up call: idle with redial"
VAL 	0x02 	QLF_CALL_HOLD 	"Set up call: hold"
VAL 	0x03 	QLF_CALL_HOLD_RDL 	"Set up call: hold with redial"
VAL 	0x04 	QLF_CALL_DISC 	"Set up call: disconnect"
VAL 	0x05 	QLF_CALL_DISC_RDL 	"Set up call: disconnect with redial"
VAL 	0b00000000 	QLF_SMS_NO_PACK 	"Send SMS: packing not required"
VAL 	0b00000001 	QLF_SMS_PACK 	"Send SMS: packing required"
VAL 	0b00000000 	QLF_DISP_PRIO_NORM 	"Display text: normal priority"
VAL 	0b00000001 	QLF_DISP_PRIO_HIGH 	"Display text: high priority"
VAL 	0b00000000 	QLF_DISP_CLR_DELAY 	"Display text: clear message after delay"
VAL 	0b10000000 	QLF_DISP_CLR_USER 	"Display text: wait for user to clear message"
VAL 	0b00000000 	QLF_INKY_DIGITS 	"Get inkey: digits (0-9, *,# and +) only"
VAL 	0b00000001 	QLF_INKY_ALPHA 	"Get inkey: alphabet set"
VAL 	0b00000000 	QLF_INKY_SMS_DEF 	"Get inkey; SMS default alphabet"
VAL 	0b00000010 	QLF_INKY_UCS2 	"Get inkey: UCS2 alphabet"
VAL 	0b00000000 	QLF_INKY_NO_HELP 	"Get inkey: no help information available"
VAL 	0b10000000 	QLF_INKY_HELP 	"Get inkey: help information available"
VAL 	0b00000000 	QLF_INPT_DIGITS 	"Get input: digits (0-9, *,# and +) only"
VAL 	0b00000001 	QLF_INPT_ALPHA 	"Get input: alphabet set"
VAL 	0b00000000 	QLF_INPT_SMS_DEF 	"Get input; SMS default alphabet"
VAL 	0b00000010 	QLF_INPT_UCS2 	"Get input: UCS2 alphabet"
VAL 	0b00000000 	QLF_INPT_ECHO 	"Get input: ME may echo input"
VAL 	0b00000100 	QLF_INPT_NO_ECHO 	"Get input: input shall not revealed in any way"
VAL 	0b00000000 	QLF_INPT_NO_PACK 	"Get input: unpacket input format"
VAL 	0b00001000 	QLF_INPT_PACK 	"Get input: SMS packed input format"
VAL 	0b00000000 	QLF_INPT_NO_HELP 	"Get input: no help information available"
VAL 	0b10000000 	QLF_INPT_HELP 	"Get input: help information available"
VAL 	0b00000000 	QLF_SITM_NOPRES 	"Select item: presentation type is not specified"
VAL 	0b00000001 	QLF_SITM_PRES 	"Select item: presentation type is specified in bit 2"
VAL 	0b00000000 	QLF_SITM_CHVAL 	"Select item: presentation as a choice of data values if bit 1 = '1'"
VAL 	0b00000010 	QLF_SITM_CHNAV 	"Select item: presentation as a choice of navigation options if bit 1 is '1'"
VAL 	0b00000000 	QLF_SITM_SEL_NOPREF 	"Select item: no selection preference"
VAL 	0b00000100 	QLF_SITM_SEL_PREF_SOFTKEY 	"Select item: selection using soft key preferred"
VAL 	0b00000000 	QLF_SITM_NO_HELP 	"Select item: no help information available"
VAL 	0b10000000 	QLF_SITM_HELP 	"Select item: help information available"
VAL 	0b00000000 	QLF_SMNU_SEL_NOPREF 	"Set up menu: no selection preference"
VAL 	0b00000001 	QLF_SMNU_SEL_PREF_SOFTKEY 	"Set up menu: selection using soft key preferred"
VAL 	0b00000000 	QLF_SMNU_NO_HELP 	"Set up menu: no help information available"
VAL 	0b10000000 	QLF_SMNU_HELP 	"Set up menu: help information available"
VAL 	0x00 	QLF_PLOI_LOC_INFO 	"Provide local information: Local information"
VAL 	0x01 	QLF_PLOI_IMEI 	"Provide local information: IMEI of ME"
VAL 	0x02 	QLF_PLOI_NTW_MSR 	"Provide local information: Network measurement results"
VAL 	0x03 	QLF_PLOI_DTT 	"Provide local information: Date, Time and Timezone"
VAL 	0x04 	QLF_PLOI_LANG_SET 	"Provide local information: Language Setting"
VAL 	0x05 	QLF_PLOI_TIM_ADV 	"Provide local information: Timing Advance"
VAL 	0x00 	QLF_LABR_IF_NOT_LCHD 	"Launch Browser: launch browser, if not already launched"
VAL 	0x02 	QLF_LABR_NOT_USED1 	"Launch Browser: not used"
VAL 	0x02 	QLF_LABR_USE_EXISTING 	"Launch Browser: use the existing browser"
VAL 	0x03 	QLF_LABR_CLOSE_AND_NEW 	"Launch Browser: close the existing browser session and launch new browser session"
VAL 	0x04 	QLF_LABR_NOT_USED2 	"Launch Browser: not used"
VAL 	0b00000000 	QLF_OPCH_ON_DEMD_LINK_EST 	"Open Channel: on demand link establishment (class e)"
VAL 	0b00000001 	QLF_OPCH_IMMDT_LINK_EST 	"Open Channel: immediate link establishment (class e)"
VAL 	0b00000000 	QLF_OPCH_NO_AUTO_RECONNECT 	"Open Channel: no automatic reconnection (class e)"
VAL 	0b00000010 	QLF_OPCH_AUTO_RECONNECT 	"Open Channel: automatic reconnection (class e)"
VAL 	0b00000000 	QLF_SNDDAT_TX 	"Send Data: store data in Tx buffer (class e)"
VAL 	0b00000001 	QLF_SNDDAT_IM 	"Send Data: Send data immediately (class e)"

VALTAB 	VAL_src_dev
VAL 	0x01 	DEV_SRC_KBD 	"Device keypad"
VAL 	0x02 	DEV_SRC_DSP 	"Device display"
VAL 	0x03 	DEV_SRC_EAR 	"Device earpiece"
VAL 	0x10 	DEV_SRC_CDR0 	"Device Additional Card Reader 0"
VAL 	0x11 	DEV_SRC_CDR1 	"Device Additional Card Reader 1"
VAL 	0x12 	DEV_SRC_CDR2 	"Device Additional Card Reader 2"
VAL 	0x13 	DEV_SRC_CDR3 	"Device Additional Card Reader 3"
VAL 	0x14 	DEV_SRC_CDR4 	"Device Additional Card Reader 4"
VAL 	0x15 	DEV_SRC_CDR5 	"Device Additional Card Reader 5"
VAL 	0x16 	DEV_SRC_CDR6 	"Device Additional Card Reader 6"
VAL 	0x17 	DEV_SRC_CDR7 	"Device Additional Card Reader 7"
VAL 	0x21 	DEV_SRC_CH1 	"Device Channel 1 (class e)"
VAL 	0x22 	DEV_SRC_CH2 	"Device Channel 2 (class e)"
VAL 	0x23 	DEV_SRC_CH3 	"Device Channel 3 (class e)"
VAL 	0x24 	DEV_SRC_CH4 	"Device Channel 4 (class e)"
VAL 	0x25 	DEV_SRC_CH5 	"Device Channel 5 (class e)"
VAL 	0x26 	DEV_SRC_CH6 	"Device Channel 6 (class e)"
VAL 	0x27 	DEV_SRC_CH7 	"Device Channel 7 (class e)"
VAL 	0x81 	DEV_SRC_SIM 	"Device SIM"
VAL 	0x82 	DEV_SRC_ME 	"Device mobile equipment"
VAL 	0x83 	DEV_SRC_NTW 	"Device network"

VALTAB 	VAL_dest_dev
VAL 	0x01 	DEV_DST_KBD 	"Device keypad"
VAL 	0x02 	DEV_DST_DSP 	"Device display"
VAL 	0x03 	DEV_DST_EAR 	"Device earpiece"
VAL 	0x10 	DEV_DST_CDR0 	"Device Additional Card Reader 0"
VAL 	0x11 	DEV_DST_CDR1 	"Device Additional Card Reader 1"
VAL 	0x12 	DEV_DST_CDR2 	"Device Additional Card Reader 2"
VAL 	0x13 	DEV_DST_CDR3 	"Device Additional Card Reader 3"
VAL 	0x14 	DEV_DST_CDR4 	"Device Additional Card Reader 4"
VAL 	0x15 	DEV_DST_CDR5 	"Device Additional Card Reader 5"
VAL 	0x16 	DEV_DST_CDR6 	"Device Additional Card Reader 6"
VAL 	0x17 	DEV_DST_CDR7 	"Device Additional Card Reader 7"
VAL 	0x21 	DEV_DST_CH1 	"Device Channel 1 (class e)"
VAL 	0x22 	DEV_DST_CH2 	"Device Channel 2 (class e)"
VAL 	0x23 	DEV_DST_CH3 	"Device Channel 3 (class e)"
VAL 	0x24 	DEV_DST_CH4 	"Device Channel 4 (class e)"
VAL 	0x25 	DEV_DST_CH5 	"Device Channel 5 (class e)"
VAL 	0x26 	DEV_DST_CH6 	"Device Channel 6 (class e)"
VAL 	0x27 	DEV_DST_CH7 	"Device Channel 7 (class e)"
VAL 	0x81 	DEV_DST_SIM 	"Device SIM"
VAL 	0x82 	DEV_DST_ME 	"Device mobile equipment"
VAL 	0x83 	DEV_DST_NTW 	"Device network"

VALTAB 	VAL_time_unit
VAL 	0x00 	TU_MIN 	"Minutes"
VAL 	0x01 	TU_SEC 	"Seconds"
VAL 	0x02 	TU_100_MSEC 	"Tenth of seconds"

VALTAB 	VAL_noa
VAL 	DEF 	 	"Reserved"
VAL 	0b000 	NOA_UNKNOWN 	"unknown"
VAL 	0b001 	NOA_INTER_NUM 	"international number"
VAL 	0b010 	NOA_NATIO_NUM 	"national significant number"
VAL 	0b011 	NOA_NETW_NUM 	"network specific number"
VAL 	0b100 	NOA_SUBSC_NUM 	"subscriber number"
VAL 	0b110 	NOA_ABBRV_NUM 	"abbreviated number"

VALTAB 	VAL_npi
VAL 	DEF 	 	"reserved"
VAL 	0b0000 	NPI_UNKNOWN 	"unknown"
VAL 	0b0001 	NPI_ISDN 	"ISDN/Telephony Numbering Plan (Rec CCITT E.164)"
VAL 	0b0011 	NPI_X121 	"data numbering plan (CCITT Rec X.121)"
VAL 	0b0100 	NPI_F69 	"telex numbering plan (CCITT Rec F.69)"
VAL 	0b0110 	NPI_LAND_MOBILE 	"land mobile numbering plan (CCITT Rec E.212)"
VAL 	0b1000 	NPI_NATIONAL 	"land mobile numbering plan (CCITT Rec E.212)"
VAL 	0b1001 	NPI_PRIVATE 	"Private numbering plan"

VALTAB 	VAL_gen
VAL 	0x00 	RSLT_PERF_SUCCESS 	"Command performed successfully"
VAL 	0x01 	RSLT_PERF_PART_CMPR 	"Command performed with partial comprehension"
VAL 	0x02 	RSLT_PERF_MISS_INFO 	"Command performed with missing information"
VAL 	0x03 	RSLT_RFSH_ADD_EF 	"Refresh performed with additional EF read"
VAL 	0x05 	RSLT_PERF_MDFY_SIM 	"Command performed but modified by SIM"
VAL 	0x06 	RSLT_PERF_LIM_SRV 	"Command performed successfully, limited service"
VAL 	0x07 	RSLT_PERF_MDFIED 	"Command performed with modification  (class e)"
VAL 	0x10 	RSLT_SESS_USR_TERM 	"Proactive SIM session terminated by user"
VAL 	0x11 	RSLT_SESS_USR_BACK 	"Backward move in proactive SIM session"
VAL 	0x12 	RSLT_NO_RESP 	"No response from user"
VAL 	0x13 	RSLT_HELP_USR_REQ 	"Help information required by user"
VAL 	0x14 	RSLT_USER_TERM_SS 	"SS or USSD transaction terminated by user"
VAL 	0x20 	RSLT_ME_UNAB_PROC 	"ME is unable to process command"
VAL 	0x21 	RSLT_NTW_UNAB_PROC 	"Network is unable to process command"
VAL 	0x22 	RSLT_USR_REJ 	"User did not accept set up request"
VAL 	0x23 	RSLT_USR_CLR_DWN 	"User cleared down call before connection or network release"
VAL 	0x25 	RSLT_CC_SIM_TMP 	"Interaction with call control by SIM temporary problem"
VAL 	0x26 	RSLT_LABRWS_GENERIC 	"Launch browser generic error code  (class e)"
VAL 	0x30 	RSLT_ME_CAP 	"Command beyond ME capabilities"
VAL 	0x31 	RSLT_UNKN_TYPE 	"Command type not understood"
VAL 	0x32 	RSLT_UNKN_DATA 	"Command data not understood"
VAL 	0x33 	RSLT_UNKN_NR 	"Command number not understood"
VAL 	0x34 	RSLT_SS_ERR 	"SS return error"
VAL 	0x35 	RSLT_SMS_ERR 	"SMS RP-ERROR"
VAL 	0x36 	RSLT_ERR_REQ_VAL 	"Error, required values are missing"
VAL 	0x37 	RSLT_USSD_ERR 	"USSD return error"
VAL 	0x39 	RSLT_CC_SIM_PRM 	"interaction with call control by SIM or SMS control by SIM permanent problem"
VAL 	0x3A 	RSLT_BEARIND_PERR 	"Bearer Independent Protocol error  (class e)"

VALTAB 	VAL_add
VAL 	0x00 	ADD_NO_CAUSE 	"No specific cause can be given"
VAL 	0x01 	ADD_ME_SCR_BUSY 	"ME: Screen is busy"
VAL 	0x02 	ADD_ME_CALL_BUSY 	"ME: currently busy on call"
VAL 	0x03 	ADD_ME_SS_BUSY 	"ME: currently busy on SS transaction"
VAL 	0x04 	ADD_ME_NO_SERV 	"ME: no service"
VAL 	0x05 	ADD_ME_ACC_BAR 	"ME: Access control class bar"
VAL 	0x06 	ADD_ME_RR_DENIED 	"ME: Radio resource not granted"
VAL 	0x07 	ADD_ME_NO_SPCH_CALL 	"ME: Not in speech call"
VAL 	0x08 	ADD_ME_USSD_BUSY 	"ME: currently busy on USSD transaction"
VAL 	0x01 	ADD_CC_NOT_ALLWD 	"Call Control: Action not allowed"
VAL 	0x02 	ADD_CC_REQ_CHNG 	"Call Control: Type of request has changed"
VAL 	0x01 	ADD_LBP_BEARR_NAVAIL 	"Launch browser: Bearer unavailable (class c)"
VAL 	0x02 	ADD_LBP_BRWSR_NAVAIL 	"Launch browser: Browser unavailable (class c)"
VAL 	0x03 	ADD_LBP_ME_UNABL_RDPD 	"Launch browser: ME unable to read provisioning data (class c)"
VAL 	0x01 	ADD_BIP_NO_CHAN_AVAIL 	"No channel available (class e)"
VAL 	0x02 	ADD_BIP_CHAN_CLOSD 	"Channel closed (class e)"
VAL 	0x03 	ADD_BIP_CHANID_NT_VLD 	"Channel identifier not valid (class e)"
VAL 	0x04 	ADD_BIP_BUF_SIZ_NAVAIL 	"Requested buffer size not available (class e)"
VAL 	0x05 	ADD_BIP_SECUR_ERR 	"Security error (unsuccessful authentication) (class e)"
VAL 	0x06 	ADD_BIP_SIME_ITL_NAVAIL 	"Requested SIM/ME interface transport level not available (class e)"

VALTAB 	VAL_tos
VAL 	DEF 	 	"Reserved"
VAL 	0b000 	TOS_X213 	"NSAP (X.213/ISO 8348 AD2)"
VAL 	0b010 	TOS_USER 	"User Specified"

VALTAB 	VAL_oei
VAL 	0b0 	OEI_EVEN 	"even number of address signals"
VAL 	0b1 	OEI_ODD 	"odd number of address signals"

VALTAB 	VAL_event
VAL 	DEF 	 	"Reserved"
VAL 	0x00 	EVENT_MT_CALL 	"Incoming Call"
VAL 	0x01 	EVENT_CALL_CONN 	"Call is connected"
VAL 	0x02 	EVENT_CALL_DISC 	"Call is disconnected"
VAL 	0x03 	EVENT_LOC_STATUS 	"Service status change"
VAL 	0x04 	EVENT_USER_ACTIVE 	"User activity"
VAL 	0x05 	EVENT_IDLE_SCREEN 	"Idle screen is available"
VAL 	0x08 	EVENT_BROWS_TERMIN 	"Browser Termination (if class c supported)"
VAL 	0x09 	EVENT_DATA_AVAIL 	"Data available (if class e supported)"
VAL 	0x0A 	EVENT_CHAN_STAT 	"Channel Status (if class e supported)"

VALTAB 	VAL_bc_rpi
VAL 	DEF 	 	"Reserved"
VAL 	0x01 	BC_RPI_ALT 	"Alternate mode"
VAL 	0x03 	BC_RPI_SEQ 	"Sequential mode"

VALTAB 	VAL_loc_state
VAL 	DEF 	 	"Reserved"
VAL 	0x01 	LOC_ST_NORMAL 	"Normal service"
VAL 	0x02 	LOC_ST_LIMITED 	"Limited service"
VAL 	0x03 	LOC_ST_NOSERV 	"No service"

VALTAB 	VAL_gprs_pdp_type
VAL 	0x02 	PDP_TYPE_IP 	"Internet Protocol, IETF STD 5"

VALTAB 	VAL_oth_addr_type
VAL 	DEF 	 	"reserved"
VAL 	0x21 	IPv4 	"Internet Protocal vers.4"
VAL 	0x57 	IPv6 	"Internet Protocal vers.6"

VALTAB 	VAL_trans_prot_type
VAL 	DEF 	 	"reserved"
VAL 	0x1 	UDP 	"User Datagramm Protocol"
VAL 	0x2 	TCP 	"Transmission Control Protocol"

VALTAB 	VAL_browser
VAL 	DEF 	 	"reserved"
VAL 	0x00 	DEFAULT_BROWSER 	"Default browser usage"

VALTAB 	VAL_bearer
VAL 	DEF 	 	"reserved"
VAL 	0x00 	B_SMS 	"short message service"
VAL 	0x01 	B_CSD 	"circle switched data"
VAL 	0x02 	B_USSD 	"unstructured supplementary service data"
VAL 	0x03 	B_GPRS 	"generel packet radio systeme"

VALTAB 	VAL_brows_term_s
VAL 	0x00 	USER_TERMINATION 	"terminated by user action"
VAL 	0x01 	ERROR_TERMINATION 	"terminated by error"

VALTAB 	VAL_chan_id
VAL 	0b000 	NO_CHAN_AVAIL 	""
VAL 	0b001 	CHANNEL_ID_1 	""
VAL 	0b010 	CHANNEL_ID_2 	""
VAL 	0b011 	CHANNEL_ID_3 	""
VAL 	0b100 	CHANNEL_ID_4 	""
VAL 	0b101 	CHANNEL_ID_5 	""
VAL 	0b110 	CHANNEL_ID_6 	""
VAL 	0b111 	CHANNEL_ID_7 	""

VALTAB 	VAL_chan_stat_inf1
VAL 	DEF 	 	"reserved"

VALTAB 	VAL_chan_stat_link
VAL 	0b00 	LINK_NO_ESTABL 	"link not established or PDP context not activated"
VAL 	0b01 	LINK_ESTABL 	"link established or PDP context activated"

VALTAB 	VAL_chan_stat_inf2
VAL 	DEF 	 	"reserved"
VAL 	0b00000000 	NO_FURTH_INFO 	"no further info can be given"
VAL 	0b00000001 	 	"reserved"
VAL 	0b00000010 	 	"reserved"
VAL 	0b00000011 	 	"reserved"
VAL 	0b00000100 	 	"reserved"
VAL 	0b00000101 	LINK_DROPPED 	"link dropped"

VALTAB 	VAL_bear_type
VAL 	0x01 	BT_CSD 	"bearer type CSD"
VAL 	0x02 	BT_GPRS 	"bearer type GPRS"
VAL 	0x03 	BT_DEFAULT 	"default bearer parameters"




VAR 	cmd_prms 	"Parameters" 	
 	1952


VAR 	cmd_nr 	"Command number" 	
 	8


VAR 	cmd_typ 	"Command type" 	
 	8

VAL 	@m_sat - VAL_cmd_typ@ 	

VAR 	cmd_qlf 	"Command qualifier" 	
 	8

VAL 	@m_sat - VAL_cmd_qlf@ 	

VAR 	src_dev 	"Source device" 	
 	8

VAL 	@m_sat - VAL_src_dev@ 	

VAR 	dest_dev 	"Destination device" 	
 	8

VAL 	@m_sat - VAL_dest_dev@ 	

VAR 	alpha_id 	"Alpha identifier" 	
 	8


VAR 	alpha_id_2 	"Alpha identifier" 	
 	8


VAR 	ss_ctrl_string 	"SS control string" 	
 	4


VAR 	cap_cnf_parms 	"Capability configuration parameter 1" 	
 	MAX_CAP_CNF_LEN


VAR 	cap_cnf_parms_2 	"Capability configuration parameter 2" 	
 	MAX_CAP_CNF_LEN


VAR 	time_unit 	"Time unit" 	
 	8

VAL 	@m_sat - VAL_time_unit@ 	

VAR 	time_ivl 	"Time interval" 	
 	8


VAR 	msg_type 	"Message type" 	
 	8


VAR 	noa 	"Nature of address" 	
 	3

VAL 	@m_sat - VAL_noa@ 	

VAR 	npi 	"Numbering plan indication" 	
 	4

VAL 	@m_sat - VAL_npi@ 	

VAR 	bcdDigit 	"BCD digit" 	
 	4


VAR 	gen 	"General result" 	
 	8

VAL 	@m_sat - VAL_gen@ 	

VAR 	add 	"Additional information" 	
 	1952

VAL 	@m_sat - VAL_add@ 	

VAR 	dcs 	"Data coding scheme" 	
 	8


VAR 	text_str 	"Text string" 	
 	8


VAR 	item 	"Choosen item" 	
 	8


VAR 	mnc_mcc 	"MNC and MCC" 	
 	24


VAR 	lac 	"Location area code" 	
 	16


VAR 	cid 	"Cell identity value" 	
 	16


VAR 	imei 	"IMEI" 	
 	64


VAR 	ntw_msr_res 	"Network measurement results" 	
 	128


VAR 	bcch_list 	"BCCH channel list" 	
 	384


VAR 	cb_page 	"Cell broadcast page" 	
 	704


VAR 	cc_req_act 	"CC requested action" 	
 	1936


VAR 	tos 	"Type of subaddress" 	
 	3

VAL 	@m_sat - VAL_tos@ 	

VAR 	oei 	"Odd/even indicator" 	
 	1

VAL 	@m_sat - VAL_oei@ 	

VAR 	tpdu_data 	"Short Message Data" 	
 	8


VAR 	ussd_str 	"USSD string" 	
 	8


VAR 	icon_qu 	"Icon Qualifier" 	
 	8


VAR 	icon_id 	"Icon Identifier" 	
 	8


VAR 	event 	"List of events" 	
 	8

VAL 	@m_sat - VAL_event@ 	

VAR 	ti 	"Transaction Identifier" 	
 	4


VAR 	cs 	"Cause" 	
 	8


VAR 	bc_rpi 	"BC Repeat Indicator" 	
 	8

VAL 	@m_sat - VAL_bc_rpi@ 	

VAR 	loc_state 	"Location status" 	
 	8

VAL 	@m_sat - VAL_loc_state@ 	

VAR 	at_string 	"AT string" 	
 	8


VAR 	csd_speed 	"CSD speed" 	
 	8


VAR 	csd_name 	"CSD name" 	
 	8


VAR 	csd_ce 	"CSD connection elem" 	
 	8


VAR 	gprs_prec 	"GPRS precedence" 	
 	8


VAR 	gprs_delay 	"GPRS delay" 	
 	8


VAR 	gprs_rely 	"GPRS reliability" 	
 	8


VAR 	gprs_peak 	"GPRS peak throughput" 	
 	8


VAR 	gprs_mean 	"GPRS mean throughput" 	
 	8


VAR 	gprs_pdp_type 	"GPRS PDP type" 	
 	8

VAL 	@m_sat - VAL_gprs_pdp_type@ 	

VAR 	ch_dat_str 	"Channel data string" 	
 	8


VAR 	chan_dat_lth 	"Channel data length" 	
 	8


VAR 	buffer_size 	"Buffer size" 	
 	16


VAR 	oth_addr_type 	"Type of local Address" 	
 	8

VAL 	@m_sat - VAL_oth_addr_type@ 	

VAR 	ipv4_addr 	"IPv4 address" 	
 	8


VAR 	ipv6_addr 	"IPv6 address" 	
 	8


VAR 	trans_prot_type 	"Transport protocol type" 	
 	8

VAL 	@m_sat - VAL_trans_prot_type@ 	

VAR 	port_number 	"Port number" 	
 	16


VAR 	browser 	"Browser" 	
 	8

VAL 	@m_sat - VAL_browser@ 	

VAR 	url_value 	"URL value" 	
 	8


VAR 	bearer 	"Bearer List" 	
 	8

VAL 	@m_sat - VAL_bearer@ 	

VAR 	prov_file_id 	"Provisioning File Path Id" 	
 	8


VAR 	brows_term_s 	"Browser Termination Source" 	
 	8

VAL 	@m_sat - VAL_brows_term_s@ 	

VAR 	chan_id 	"Channel Status Identifier" 	
 	3

VAL 	@m_sat - VAL_chan_id@ 	

VAR 	chan_stat_inf1 	"Channel Status Information1" 	
 	4

VAL 	@m_sat - VAL_chan_stat_inf1@ 	

VAR 	chan_stat_link 	"Channel Status Link" 	
 	1

VAL 	@m_sat - VAL_chan_stat_link@ 	

VAR 	chan_stat_inf2 	"Channel Status Information2" 	
 	8

VAL 	@m_sat - VAL_chan_stat_inf2@ 	

VAR 	n_acc_name 	"Network Access name" 	
 	8


VAR 	bear_type 	"Bearer type" 	
 	8

VAL 	@m_sat - VAL_bear_type@ 	

VAR 	lang_buf 	"Provide Local Info/Language Setting" 	
 	8


VAR 	subadr_str 	"sub address bytes" 	
 	8





COMP 	cmd_details 	"Command details"
{
 	 	cmd_nr 	 ; Command number
 	 	cmd_typ 	 ; Command type
 	 	cmd_qlf 	 ; Command qualifier
}



COMP 	dev_ids 	"Device identities"
{
 	 	src_dev 	 ; Source device
 	 	dest_dev 	 ; Destination device
}



COMP 	pas_cmd 	"Proactive SIM Command"
{
 	GSM5_TLV  	cmd_details 	0x81 	 ; Command details
 	GSM5_TLV  	dev_ids 	0x82 	 ; Device identities
 	GSM5_V  	cmd_prms 	 ; Command parameters
}



COMP 	ss_string 	"SS string"
{
 	+ 	 	noa 	 ; Nature of address
 	* 	 	npi 	 ; Numbering plan identification
 	BCDEVEN  	ss_ctrl_string 	[0..MAX_SS_STRING_LEN] 	 ; SS control string
}



COMP 	addr 	"Address"
{
 	+ 	 	noa 	 ; Nature of address
 	* 	 	npi 	 ; Numbering plan identification
 	BCDEVEN  	bcdDigit 	[0..MAX_PARTY_NUM_SAT] 	 ; BCD digit
}



COMP 	subaddr 	"Subaddress"
{
 	+ 	 	tos 	 ; Type of subaddress
 	 	oei 	 ; Odd/even indicator
 	* 	.000  ; Spare
 	 	subadr_str 	[0..MAX_SUBADDR_NUM] 	 ; Structured Element Item
}



COMP 	res 	"Result"
{
 	 	gen 	 ; General result
 	GSM5_V  	add 	 ; Additional information
}
TYPEDEF COMP res 	res_2 	"Result 2"



COMP 	text 	"Text string"
{
 	 	dcs 	 ; Data coding scheme
 	 	text_str 	[0..MAX_TEXT_LEN] 	 ; text string
}
TYPEDEF COMP text 	text2 	"Text string2"



COMP 	item_id 	"Item identifier"
{
 	 	item 	 ; Choosen item
}



COMP 	cc_smc_loc_info 	"CC and SMC Location Information"
{
 	 	mnc_mcc 	 ; MNC and MCC
 	 	lac 	 ; Location Area Code
 	 	cid 	 ; Cell Identity Value
}



COMP 	cbd_cmd 	"CB download"
{
 	GSM5_TLV  	dev_ids 	0x82 	 ; Device identities
 	GSM5_TLV  	cb_page 	0x8C 	 ; Cell broadcast page
}



COMP 	dur 	"Duration"
{
 	 	time_unit 	 ; Time unit
 	 	time_ivl 	 ; Time interval
}
TYPEDEF COMP dur 	dur2 	"Duration2"



COMP 	ussd_string 	"USSD string"
{
 	 	dcs 	 ; Data coding scheme
 	 	ussd_str 	[0..MAX_SAT_USSD_LEN] 	 ; USSD string
}



COMP 	ccr_allw 	"Call control result, allowed"
{
 	GSM5_TLV  	addr 	0x06 	 ; Address
 	GSM5_TLV  	ss_string 	0x09 	 ; SS string
 	GSM5_TLV  	ussd_string 	0x0A 	 ; USSD string
 	GSM5_TLV  	cap_cnf_parms 	0x07 	 ; Capabilitiy conf. parameter 1
 	GSM5_TLV  	subaddr 	0x08 	 ; Subaddress
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; Alpha identifier
 	GSM5_TLV  	bc_rpi 	0x2A 	 ; BC Repeat Indicator
 	GSM5_TLV  	cap_cnf_parms_2 	0x07 	 ; Capabilitiy conf. parameter 2
}
TYPEDEF COMP ccr_allw 	ccr_not_allw 	"Call control result, not allowed"
TYPEDEF COMP ccr_allw 	ccr_allw_mdfy 	"Call Control result, allowed with modifications"



COMP 	cc_cmd 	"Call control"
{
 	GSM5_TLV  	dev_ids 	0x82 	 ; Device identities
 	GSM5_TLV  	addr 	0x86 	 ; Address
 	GSM5_TLV  	ss_string 	0x89 	 ; SS string
 	GSM5_TLV  	ussd_string 	0x8A 	 ; USSD string
 	GSM5_TLV  	cap_cnf_parms 	0x07 	 ; Capabilitiy configuration parameter 1
 	GSM5_TLV  	subaddr 	0x08 	 ; Subaddress
 	GSM5_TLV  	cc_smc_loc_info 	0x13 	 ; CC and SMC Location Information
 	GSM5_TLV  	cap_cnf_parms_2 	0x07 	 ; Capabilitiy configuration parameter 2
}



COMP 	smpdu 	"SMS TPDU"
{
 	 	tpdu_data 	[7..MAX_SMS_TPDU_LEN] 	 ; Short Message Data
}



COMP 	icon 	"Icon Identifier"
{
 	 	icon_qu 	 ; Icon Qualifier
 	 	icon_id 	 ; Icon Identifier
}
TYPEDEF COMP icon 	icon_2 	"Icon Identifier"



COMP 	ev_list 	"Event list"
{
 	 	event 	[1..MAX_EVENT_LIST_LEN] 	 ; List of events
}



COMP 	dtmf_string 	"DTMF string"
{
 	BCDEVEN  	bcdDigit 	[0..MAX_DTMF_LEN] 	 ; BCD digit
}



COMP 	ti_oct 	"Transaction Identifier octet"
{
 	 	ti 	 ; Transaction Identifier
 	.0000  ; Spare
}



COMP 	ti_list 	"Transaction identifier list"
{
 	 	ti_oct 	[1..MAX_TI_LEN] 	 ; Single Transaction Identifier
}



COMP 	cause 	"Cause information element"
{
 	 	cs 	[0..MAX_CAUSE_LEN] 	 ; Cause
}



COMP 	sm_addr 	"Address 1"
{
 	+ 	 	noa 	 ; Nature of address
 	* 	 	npi 	 ; Numbering plan identification
 	BCDEVEN  	bcdDigit 	[0..MAX_SMS_DIGIT_LEN] 	 ; BCD digit
}
TYPEDEF COMP sm_addr 	sm_addr_2 	"Address 2"



COMP 	smc_cmd 	"Call control"
{
 	GSM5_TLV  	dev_ids 	0x82 	 ; Device identities
 	GSM5_TLV  	sm_addr 	0x86 	 ; Short Message Address 1
 	GSM5_TLV  	sm_addr_2 	0x86 	 ; Short Message Address 2
 	GSM5_TLV  	cc_smc_loc_info 	0x93 	 ; CC and SMC Location Information
}



COMP 	smcr_allw 	"Call control result, allowed"
{
 	GSM5_TLV  	sm_addr 	0x06 	 ; Service Center Address
 	GSM5_TLV  	sm_addr_2 	0x06 	 ; Destination Address
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; Alpha identifier
}
TYPEDEF COMP smcr_allw 	smcr_not_allw 	"Call control result, not allowed"
TYPEDEF COMP smcr_allw 	smcr_allw_mdfy 	"Call Control result, allowed with modifications"



COMP 	at_resp 	"AT response"
{
 	 	text_str 	[0..MAX_CMD_AT_LEN] 	 ; text string
}



COMP 	chan_data 	"Channel data"
{
 	 	ch_dat_str 	[0..241] 	 ; Channel data string
}



COMP 	other_addr 	"Other Address"
{
 	 	oth_addr_type 	 ; Other Address  type
 	< (oth_addr_type = 0x21) 	 	ipv4_addr 	[4] 	> 	 ; IPv4 parameter
 	< (oth_addr_type = 0x57) 	 	ipv6_addr 	[16] 	> 	 ; IPv6 parameter
}
TYPEDEF COMP other_addr 	data_dest_addr 	"Data Destination Address"



COMP 	if_transp_lev 	"Interface transport level"
{
 	 	trans_prot_type 	 ; Transport protocol type
 	 	port_number 	 ; Port number
}



COMP 	browser_id 	"Browser Identity"
{
 	 	browser 	 ; Browser Identity
}



COMP 	url 	"URL"
{
 	 	url_value 	[0..MAX_URL_LEN] 	 ; URL Value
}



COMP 	prov_file_ref 	"Provisioning File Reference"
{
 	 	prov_file_id 	[0..MAX_PROV_F_PATH_LEN] 	 ; Provisioning File Path Id
}



COMP 	brows_term_cause 	"Browser Termination Cause"
{
 	 	brows_term_s 	 ; Browser Termination Source
}



COMP 	chan_stat 	"Channel Status Parameter"
{
 	 	chan_stat_link 	 ; Channel Status Link
 	 	chan_stat_inf1 	 ; Channel Status Information1
 	 	chan_id 	 ; Channel Identifier
 	 	chan_stat_inf2 	 ; Channel Status Information2
}



COMP 	evd_cmd 	"Call control"
{
 	GSM5_TLV  	ev_list 	0x99 	 ; Event list
 	GSM5_TLV  	dev_ids 	0x82 	 ; Device identities
 	GSM5_TLV  	ti_list 	0x9C 	 ; Transaction identifier list
 	GSM5_TLV  	addr 	0x06 	 ; Address
 	GSM5_TLV  	subaddr 	0x08 	 ; Subaddress
 	GSM5_TLV  	cause 	0x1A 	 ; Cause information element
 	GSM5_TLV  	loc_state 	0x9B 	 ; Location status
 	GSM5_TLV  	cc_smc_loc_info 	0x13 	 ; CC and SMC Location Information
 	GSM5_TLV  	brows_term_cause 	0x35 	 ; Browser Termination cause
 	GSM5_TLV  	chan_stat 	0xB8 	 ; Channel status
 	GSM5_TLV  	chan_dat_lth 	0xB7 	 ; Channel data length
}



COMP 	csd_bear_prm 	"CSD bearer parameter"
{
 	 	csd_speed 	 ; CSD speed
 	 	csd_name 	 ; CSD name
 	 	csd_ce 	 ; CSD connection elem
}



COMP 	gprs_bear_prm 	"GPRS bearer parameter"
{
 	 	gprs_prec 	 ; GPRS precedence
 	 	gprs_delay 	 ; GPRS delay
 	 	gprs_rely 	 ; GPRS reliability
 	 	gprs_peak 	 ; GPRS peak throughput
 	 	gprs_mean 	 ; GPRS mean throughput
 	 	gprs_pdp_type 	 ; GPRS PDP type
}



COMP 	bear_desc 	"Bearer description"
{
 	 	bear_type 	 ; Bearer type
 	< (bear_type = 1) 	 	csd_bear_prm 	> 	 ; CSD bearer parameter
 	< (bear_type = 2) 	 	gprs_bear_prm 	> 	 ; GPRS bearer parameter
}



COMP 	nan_buf 	"Network access name buffer"
{
 	 	n_acc_name 	[0..MAX_SAT_APN_LEN] 	 ; Network access name
}



COMP 	dtt 	"Date-Time and Time zone"
{
 	 	text_str 	[0..7] 	 ; text string
}



COMP 	lang 	"language Preferance"
{
 	 	lang_buf 	[0..2] 	 ; text string
}






MSG 	stk_cmd 	downlink 	0b11100000 ; SAT Command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	pas_cmd 	0xD0 	 ; Proactive SIM Command
}



MSG 	send_ss 	downlink 	SAT_CMD_SEND_SS ; Send SS string
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	ss_string 	0x89 	 ; ss_string
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
}



MSG 	setup_call 	downlink 	SAT_CMD_SETUP_CALL ; Set up call
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	addr 	0x86 	 ; address
 	GSM5_TLV  	cap_cnf_parms 	0x07 	 ; capability conf. parameter
 	GSM5_TLV  	subaddr 	0x08 	 ; subaddress
 	GSM5_TLV  	dur 	0x04 	 ; duration
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
 	GSM5_TLV  	alpha_id_2 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	icon_2 	0x1E 	 ; Icon Identifier
}



MSG 	send_sm 	downlink 	SAT_CMD_SEND_SMS ; Send Short Message
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	addr 	0x06 	 ; address
 	GSM5_TLV  	smpdu 	0x8B 	 ; SMS TPDU
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
}



MSG 	send_ussd 	downlink 	SAT_CMD_SEND_USSD ; Send USSD string
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	ussd_string 	0x8A 	 ; USSD string
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
}



MSG 	send_dtmf 	downlink 	SAT_CMD_SEND_DTMF ; Send DTMF string
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	dtmf_string 	0xAC 	 ; DTMF string
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
}



MSG 	setup_event 	downlink 	SAT_CMD_EVENT_LIST ; Setup Event List
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	ev_list 	0x99 	 ; Event list
}



MSG 	term_resp 	uplink 	0b11100000 ; Terminal response
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	cmd_details 	0x81 	 ; Command details
 	GSM5_TLV  	dev_ids 	0x82 	 ; Device identities
 	GSM5_TLV  	res 	0x83 	 ; Result
 	GSM5_TLV  	dur 	0x84 	 ; Duration
 	GSM5_TLV  	text 	0x8D 	 ; Text string
 	GSM5_TLV  	item_id 	0x90 	 ; Item identifier
 	GSM5_TLV  	cc_smc_loc_info 	0x93 	 ; CC and SMC Location Information
 	GSM5_TLV  	imei 	0x94 	 ; IMEI
 	GSM5_TLV  	ntw_msr_res 	0x96 	 ; Network measurement results
 	GSM5_TLV  	bcch_list 	0x9D 	 ; BCCH channel list
 	GSM5_TLV  	dtt 	0xA6 	 ; Date-Time and Time zone
 	GSM5_TLV  	cc_req_act 	0xA7 	 ; CC requested action
 	GSM5_TLV  	res_2 	0x83 	 ; Result 2
 	GSM5_TLV  	at_resp 	0xA9 	 ; AT Response
 	GSM5_TLV  	chan_data 	0xB6 	 ; Channel data
 	GSM5_TLV  	chan_stat 	[1..7] 	0xB8 	 ; Channel status
 	GSM5_TLV  	chan_dat_lth 	0xB7 	 ; Channel data length
 	GSM5_TLV  	bear_desc 	0xB5 	 ; Bearer Description
 	GSM5_TLV  	buffer_size 	0xB9 	 ; Buffer size
 	GSM5_TLV  	lang 	0xAD 	 ; Language Preferance
}



MSG 	env_cmd 	uplink 	0b11100001 ; Envelope command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	cbd_cmd 	0xD2 	 ; CB download command
 	GSM5_TLV  	cc_cmd 	0xD4 	 ; Call control command
 	GSM5_TLV  	smc_cmd 	0xD5 	 ; MO-SM control command
 	GSM5_TLV  	evd_cmd 	0xD6 	 ; Event download command
}



MSG 	env_res 	downlink 	0b11100001 ; Envelope command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	ccr_allw 	0x00 	 ; Call control result, allowed
 	GSM5_TLV  	ccr_not_allw 	0x01 	 ; Call control result, not allowed
 	GSM5_TLV  	ccr_allw_mdfy 	0x02 	 ; Call control result, allowed with modification
}



MSG 	env_res_smc 	downlink 	0b11100010 ; Envelope command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	smcr_allw 	0x00 	 ; Call control result, allowed
 	GSM5_TLV  	smcr_not_allw 	0x01 	 ; Call control result, not allowed
 	GSM5_TLV  	smcr_allw_mdfy 	0x02 	 ; Call control result, allowed with modification
}



MSG 	run_at 	downlink 	SAT_CMD_RUN_AT ; Run AT command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	at_string 	[MAX_CMD_AT_LEN] 	0xA8 	 ; AT string
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
}



MSG 	open_channel 	downlink 	SAT_CMD_OPEN_CHANNEL ; Open Channel command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
 	GSM5_TLV  	addr 	0x06 	 ; address
 	GSM5_TLV  	subaddr 	0x08 	 ; subaddress
 	GSM5_TLV  	dur 	0x04 	 ; duration
 	GSM5_TLV  	dur2 	0x04 	 ; duration2
 	GSM5_TLV  	bear_desc 	0xB5 	 ; bearer description
 	GSM5_TLV  	buffer_size 	0xB9 	 ; Buffer size
 	GSM5_TLV  	nan_buf 	0x47 	 ; Network Acc Name
 	GSM5_TLV  	other_addr 	0x3E 	 ; other address
 	GSM5_TLV  	text 	0x0D 	 ; Text string
 	GSM5_TLV  	text2 	0x0D 	 ; Text string2
 	GSM5_TLV  	if_transp_lev 	0x3C 	 ; IF transport level
 	GSM5_TLV  	data_dest_addr 	0x3E 	 ; Data dest address
}



MSG 	close_channel 	downlink 	SAT_CMD_CLOSE_CHANNEL ; Close Channel command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
}



MSG 	receive_data 	downlink 	SAT_CMD_RECEIVE_DATA ; Receive Data command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
 	GSM5_TLV  	chan_dat_lth 	0xB7 	 ; Channel data length
}



MSG 	send_data 	downlink 	SAT_CMD_SEND_DATA ; Send Data command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	alpha_id 	[MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
 	GSM5_TLV  	chan_data 	0xB6 	 ; Channel data
}



MSG 	get_cha_stat 	downlink 	SAT_CMD_GET_CHANNEL_STATUS ; Get Channel Status command
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	launch_browser 	downlink 	SAT_CMD_LAUNCH_BROWSER ; Launch Browser command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM5_TLV  	browser_id 	0x30 	 ; Browser Identity
 	GSM5_TLV  	url 	0xB1 	 ; Universal Res Loc
 	GSM5_TLV  	bearer 	[0..MAX_BEARER_LIST_LEN] 	0x32 	 ; Bearer
 	GSM5_TLV  	prov_file_ref 	[0..MAX_PFP_ELEM] 	0x33 	 ; Prov File Reference
 	GSM5_TLV  	text 	0x0D 	 ; Text string
 	GSM5_TLV  	alpha_id 	[0..MAX_ALPHA_ID_LEN] 	0x05 	 ; alpha identifier
 	GSM5_TLV  	icon 	0x1E 	 ; Icon Identifier
}