FreeCalypso > hg > fc-tourmaline
view scripts/mk-component.sh @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 08ecd0bd517d |
children |
line wrap: on
line source
#!/bin/sh if [ $# -lt 1 -o $# -gt 2 ] then echo "usage: $0 component-lib [flavor]" 1>&2 exit 1 fi LIBNAME="$1" if [ -n "$2" ] then recipe_file="components/$1-$2" else recipe_file="components/$1" fi if [ ! -f "$recipe_file" ] then echo "Error: $recipe_file not found" 1>&2 exit 1 fi if [ -z "$BUILD_DIR" ] then echo "Error: BUILD_DIR= must be passed via environment" 1>&2 exit 1 fi set -e mkdir -p $BUILD_DIR/$LIBNAME # beginning of the Makefile echo "all: $LIBNAME.lib" > $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile # shell functions to be used in the recipes make_version() { case $# in 1) echo "$1_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ../../scripts/make-version.sh $1 > $1_version.c" \ >> $BUILD_DIR/$LIBNAME/Makefile ;; 2) echo "$2_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ../../scripts/make-version.sh $1 > $2_version.c" \ >> $BUILD_DIR/$LIBNAME/Makefile ;; *) echo "Error: make_version takes 1 or 2 arguments" 1>&2 exit 1 ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile } asm_file() { if [ $# != 1 ] then echo "Error: asm_file takes 1 argument" 1>&2 exit 1 fi objname=`basename "$1" .s`.obj helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/asm470 ${ASMFLAGS} "$1" '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" } cfile_plain() { if [ $# != 1 ] then echo "Error: cfile_plain takes 1 argument" 1>&2 exit 1 fi objname=`basename "$1" .c`.obj helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) helpers/makeline cmd rm -f '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} ${CPPFLAGS} \ "$1" >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) objname_lc=`echo $objname | tr A-Z a-z` helpers/makeline cmd mv $objname_lc $objname \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" } cfile_str2ind() { if [ $# != 1 ] then echo "Error: cfile_str2ind takes 1 argument" 1>&2 exit 1 fi if [ "$USE_STR2IND" = 1 ] then objname=`basename "$1" .c`.obj pp_name=`echo $1 | sed -e 's/\.c$/.pp/' | tr A-Z a-z` pp__name=`echo $1 | sed -e 's/\.c$/.pp_/' | tr A-Z a-z` helpers/makeline dep $objname "$1" \ >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) helpers/makeline cmd rm -f '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac helpers/makeline cmd ../../toolwrap/cl470 -q -po -p? -x \ ${CPPFLAGS} "$1" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/str2ind -a \ -t ../str2ind.tab -l ../str2ind.log \ -f "$pp_name" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} \ "$pp__name" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd @rm -f "$pp_name" \ >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd @rm -f "$pp__name" \ >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) objname_lc=`echo $objname | tr A-Z a-z` helpers/makeline cmd mv $objname_lc $objname \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" else cfile_plain "$1" fi } cfile_symlink() { if [ $# != 1 ] then echo "Error: cfile_symlink takes 1 argument" 1>&2 exit 1 fi localcopy=`basename "$1"` echo "$localcopy:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ln -s $1 ." >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile cfile_plain $localcopy } # invoke the recipe SRC=../../src OBJS= . "$recipe_file" # finish the Makefile helpers/makeline dep $LIBNAME.lib ${OBJS} >> $BUILD_DIR/$LIBNAME/Makefile echo ' ../../toolwrap/ar470 r $@ $^' >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile echo 'clean:' >> $BUILD_DIR/$LIBNAME/Makefile echo ' rm -f *.obj *.lib *.c' >> $BUILD_DIR/$LIBNAME/Makefile