FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/lcc/lcc_modulate.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * PWR SW Modulation * * $Id: pwr_modulate.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #include <string.h> #include "lcc/lcc.h" #include "lcc/lcc_trace.h" #include "lcc/lcc_modulate.h" #include "lcc/lcc_cfg_i.h" #include "lcc/lcc_cfg.h" #include "rv/rv_defined_swe.h" #include "abb/abb.h" /****************************************************************************** * Function prototypes ******************************************************************************/ void pwr_modulate_init(void); void pwr_modulate_on(void); void pwr_modulate_off(void); #if (USE_Q401_CHG_CIRCUIT == 1) extern T_PWR_CFG_BLOCK *pwr_cfg; #endif void pwr_modulate_init(void) { ttw(ttr(TTrEventLow,"pwr_modulate_init(%d)" NL, 0)); #if (USE_PWL_AS_MODULATOR == 1) BUZZ_LIGHT_REG |= 0x02; PWL_LEVEL_REG = 0xFF; // Full envelope function PWL_CTRL_REG = 0x00; // No 32KHz clock #else // Set GPIO 6 HIGH *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output *((volatile uint16 *) 0xfffe4802) |= 0x0080; // Set GPIO-6 = HIGH #endif ttw(ttr(TTrEventLow,"pwr_modulate_init(%d)" NL, 0xff)); } void pwr_modulate_on(void) { ttw(ttr(TTrEventLow,"pwr_modulate_on(%d)" NL, 0)); #if (USE_Q401_CHG_CIRCUIT== 1) /* Program the DAC with the constant current value taken from /pwr/chg/chg<N>.cfg multiplied by k/255, where current k is in [1..255] */ ABB_Write_Register_on_page(PAGE0, CHGREG, (pwr_cfg->data.k * pwr_cfg->chg.ichg_max) / 255); #endif #if (USE_Q402_CHG_CIRCUIT == 1) #if (USE_PWL_AS_MODULATOR == 1) BUZZ_LIGHT_REG |= 0x02; PWL_LEVEL_REG = 0xFF; // Full envelope function PWL_CTRL_REG = 0x00; // No 32KHz clock #else // Use GPIO 6 *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output *((volatile uint16 *) 0xfffe4802) |= 0x0080; // Set GPIO-6 = HIGH #endif #endif ttw(ttr(TTrEventLow,"pwr_modulate_on(%d)" NL, 0xFF)); } void pwr_modulate_off(void) { ttw(ttr(TTrEventLow,"pwr_modulate_off(%d)" NL, 0)); #if (USE_Q401_CHG_CIRCUIT == 1) // Don't do anything - FET is fully controlled in pwr_modulate_on() #endif #if (USE_Q402_CHG_CIRCUIT == 1) #ifdef USE_PWL_AS_MODULATOR BUZZ_LIGHT_REG &= 0xfd; PWL_LEVEL_REG = 0x00; // No envelope function PWL_CTRL_REG = 0x00; // No 32KHz clock #else // Use GPIO 6 *((volatile uint16 *) 0xfffe4806) |= 0x0020; // Enable GPIO module *((volatile uint16 *) 0xfffe4804) &= 0xffbf; // Set GPIO-6 = output *((volatile uint16 *) 0xfffe4802) &= 0x007f; // Set GPIO-6 = LOW #endif #endif ttw(ttr(TTrEventLow,"pwr_modulate_off(%d)" NL, 0xFF)); }