FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/pwr/pwr_cust.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/******************************************************************************* * * pwr_cust.h * * Purpose: This file contains definitions for battery management. * These definitions can be modified by the customer. * * Author Candice Bazanegue (c-brille@ti.com) * * * (C) Texas Instruments 2001 * ******************************************************************************/ #ifndef __PWR_CUST_H__ #define __PWR_CUST_H__ #include "pwr/pwr_api.h" /* Constants relative to the battery type */ #define BAT_TYPE_LI_ION_MIN 0x400 #define BAT_TYPE_LI_ION_MAX 0x450 /* Constants relative to the charging process */ #define CONSTANT_VOLTAGE_VALUE 4200 // (mV) /* for CV charge */ #define CONSTANT_CURRENT_VALUE 500 // (mA) /* for CI charge */ #define END_OF_CHARGE_I 150 // (mA) /* for CV charge */ #define END_OF_CHARGE_V 4200 // (mV) /* for CI charge */ #define CHARGE_START_AGAIN_CAPACITY 75 /* capacity threshold under which */ /* the charge is started again if */ /* the charger has been left plugged. */ /* the chosen value must be part of the */ /* a_pwr_thresholds array. */ /* Constants relative to the battery temperature */ #define BAT_TEMPERATURE_MAX_LI_ION (50) /* Celsius degrees */ #define BAT_TEMPERATURE_MIN_LI_ION (0) /* Celsius degrees */ #define BAT_TEMPERATURE_MAX BAT_TEMPERATURE_MAX_LI_ION #define BAT_TEMPERATURE_MIN BAT_TEMPERATURE_MIN_LI_ION #define THEN_10uA 0x0041 /* THSENS0 , THSENS1, THSENS2 = 0, 0, 0 MESBAT = 1 */ #define THEN_30uA 0x0051 /* THSENS0 , THSENS1, THSENS2 = 0, 1, 0 MESBAT = 1 */ #define THEN_50uA 0x0061 /* THSENS0 , THSENS1, THSENS2 = 0, 0, 1 MESBAT = 1 */ #define THEN_80uA 0x0079 /* THSENS0 , THSENS1, THSENS2 = 1, 1, 1 MESBAT = 1 */ #define MESBAT 0x0001 /* Resistive divider connected to main battery */ /* Constants relative to the timers duration */ #define PWR_BAT_TEST_TIME_1 (10) /* 10 ms */ #define PWR_BAT_TEST_TIME_2 (5000) /* 5s */ #define PWR_CALIBRATION_TIME_1 (10) /* 10 ms */ #define PWR_CALIBRATION_TIME_2 (5000) /* 5s */ #define PWR_CI_CHECKING_TIME (4000) /* 4s */ #define PWR_CV_CHECKING_TIME (4000) /* 4s */ #define PWR_DISCHARGE_CHECKING_TIME_1 (60000) /* 1 minute */ #define PWR_DISCHARGE_CHECKING_TIME_2 (10000) /* 10s */ typedef struct { UINT16 bat_voltage; T_PWR_PERCENT remain_capa; }T_PWR_THRESHOLDS; typedef enum { LI_ION, UNKNOWN } T_PWR_BATTERY_TYPE; #define NB_THRESHOLDS (6) /* number of elements in the a_pwr_thresholds array */ extern const T_PWR_THRESHOLDS a_pwr_thresholds[NB_THRESHOLDS]; /* Prototypes */ UINT16 pwr_adc_to_mvolt(UINT16 bat_voltage_madc); UINT16 pwr_adc_to_mA(UINT16 current_madc); UINT8 pwr_bat_temp_within_limits(INT16 battery_temperature); UINT8 pwr_madc_to_Celsius_conv(UINT8 bias_current, UINT16 madc_temp, INT16 *celsius_temp); void pwr_get_battery_type(void); void pwr_get_battery_temperature(void); T_PWR_PERCENT pwr_get_capacity_vs_voltage(UINT16 bat_voltage); void pwr_bat_50uA_temp_test_timer_process(void); void pwr_bat_10uA_temp_test_timer_process(void); void pwr_type_test_timer_process(void); #endif /* __PWR_CUST_H__ */