FreeCalypso > hg > fc-tourmaline

view src/cs/drivers/drv_app/spi/spi_api.c @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 34b7059b9337
children
line wrap: on
line source

/*********************************************************************************
*
*	File Name: spi_api.c
*
*	Bridge functions used to send events to the SPI task
*
*	(C) Texas Instruments, all rights reserved
*
*	Version number: 0.1		Date: 25-September-2000
*
*	History: 0.1 - Created by Candice Bazanegue
*
*	Author:
*
*********************************************************************************/

#include "rvf/rvf_api.h"
#include "spi/spi_api.h"
#include "spi/spi_env.h"
#include "spi/spi_process.h"
#include "rvm/rvm_use_id_list.h"


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_read                                           */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_read(UINT16 page, UINT16 address, CALLBACK_FUNC_U16 CallBack)
{
   T_SPI_READ *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB read not possible. Reason: SPI task not started",51, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB read not possible. Reason: SPI Task not ready",49, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   rvf_send_trace("SPI_ABB_READ",12, NULL_PARAM,
                  RV_TRACE_LEVEL_WARNING, SPI_USE_ID);

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_READ),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB read not possible. Reason: Not enough memory",
                      59,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_READ_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = (CALLBACK_FUNC) CallBack;
   msgPtr->page = page;
   msgPtr->address = address;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id,
                 msgPtr);

   return (RV_OK);
}


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_write                                          */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_write(UINT16 page, UINT16 address, UINT16 data)
{
   T_SPI_WRITE *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB write not possible. Reason: SPI task not started",52, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB write not possible. Reason: SPI Task not ready",50, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_WRITE),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB write not possible. Reason: Not enough memory",
                      60,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_WRITE_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = NULL;
   msgPtr->page = page;
   msgPtr->address = address;
   msgPtr->data = data;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id, msgPtr);

   return (RV_OK);
}


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_conf_ADC                                       */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_conf_ADC(UINT16 channels, UINT16 itval)
{
   T_SPI_ABB_CONF_ADC *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB conf ADC not possible. Reason: SPI task not started",55, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB conf ADC not possible. Reason: SPI Task not ready",53, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   rvf_send_trace("SPI_ABB_CONF_ADC",16, NULL_PARAM,
                  RV_TRACE_LEVEL_WARNING, SPI_USE_ID);

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_ABB_CONF_ADC),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB conf ADC not possible. Reason: Not enough memory",
                      63,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_CONF_ADC_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = NULL;
   msgPtr->channels               = channels;
   msgPtr->itval                  = itval;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id, msgPtr);

   return (RV_OK);
}


/******************************************************************************/
/*                                                                            */
/*    Function Name:   spi_abb_read_ADC                                       */
/*                                                                            */
/******************************************************************************/
T_RV_RET spi_abb_read_ADC(UINT16 *Buff, CALLBACK_FUNC_NO_PARAM CallBack)
{
   T_SPI_ABB_READ_ADC *msgPtr;

   /* check if the driver has been started */
   if (SPI_GBL_INFO_PTR == NULL)
   {
      rvf_send_trace("ABB read ADC not possible. Reason: SPI task not started",55, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   if(SPI_GBL_INFO_PTR->SpiTaskReady == FALSE)
   {
      rvf_send_trace("ABB conf ADC not possible. Reason: SPI Task not ready",53, NULL_PARAM,
                     RV_TRACE_LEVEL_WARNING, SPI_USE_ID);
      return (RVM_NOT_READY);
   }

   rvf_send_trace("SPI_ABB_READ_ADC",16, NULL_PARAM,
                  RV_TRACE_LEVEL_WARNING, SPI_USE_ID);

   if (rvf_get_buf (SPI_GBL_INFO_PTR->prim_id, sizeof (T_SPI_ABB_READ_ADC),(void **) &msgPtr) == RVF_RED)
   {
      rvf_send_trace ("SPI ERROR: ABB read ADC not possible. Reason: Not enough memory",
                      63,
                      NULL_PARAM,
                      RV_TRACE_LEVEL_ERROR,
                      SPI_USE_ID);

      return (RV_MEMORY_ERR);
   }

   (msgPtr->os_hdr).msg_id        = SPI_ABB_READ_ADC_EVT;
   (msgPtr->os_hdr).dest_addr_id  = SPI_GBL_INFO_PTR->addr_id;
   (msgPtr->os_hdr).callback_func = NULL;
   msgPtr->Buff                   = Buff;
   msgPtr->callback_func          = CallBack;

   rvf_send_msg (SPI_GBL_INFO_PTR->addr_id, msgPtr);

   return (RV_OK);
}