FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_core/inth/sys_inth32.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* @(#) nom : sys_inth32.c SID: 1.2 date : 05/23/03 */ /* Filename: sys_inth32.c */ /* Version: 1.2 */ /****************************************************************************** * WIRELESS COMMUNICATION SYSTEM DEVELOPMENT * * (C) 2002 Texas Instruments France. All rights reserved * * Author : Francois AMAND * * * Important Note * -------------- * * This S/W is a preliminary version. It contains information on a product * under development and is issued for evaluation purposes only. Features * characteristics, data and other information are subject to change. * * The S/W is furnished under Non Disclosure Agreement and may be used or * copied only in accordance with the terms of the agreement. It is an offence * to copy the software in any way except as specifically set out in the * agreement. No part of this document may be reproduced or transmitted in any * form or by any means, electronic or mechanical, including photocopying and * recording, for any purpose without the express written permission of Texas * Instruments Inc. * ****************************************************************************** * * FILE NAME: sys_inth32.c * * * PURPOSE: Interrupt Handler driver compiled in 32-bits mode. * * * FILE REFERENCES: * * Name IO Description * ------------- -- --------------------------------------------- * * * * EXTERNAL VARIABLES: * * Source: * * Name Type IO Description * ------------- --------------- -- ------------------------------ * * * * EXTERNAL REFERENCES: * * Name Description * ------------------ ------------------------------------------------------- * * * * ABNORMAL TERMINATION CONDITIONS, ERROR AND WARNING MESSAGES: * * * * ASSUMPTION, CONSTRAINTS, RESTRICTIONS: * * * * NOTES: * * * * REQUIREMENTS/FUNCTIONAL SPECIFICATION REFERENCES: * * * * * DEVELOPMENT HISTORY: * * Date Name(s) Version Description * ----------- -------------- ------- ------------------------------------- * 11-Oct-2002 Francois AMAND 0.0.1 First implementation * * ALGORITHM: * * *****************************************************************************/ #include "l1sw.cfg" #include "chipset.cfg" #if (CHIPSET == 12) #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #include "sys_map.h" #include "sys_inth.h" /* GLOBAL CONSTANT VARIABLES: * * Variables Type Description * --------------- ------- ----------------------------------------------- * */ void f_inth_dummy(void); /* GLOBAL CONSTANT VARIABLES: * * Variables Type Description * --------------- ------- ----------------------------------------------- * */ /* GLOBAL VARIABLES: * * Variables Type Description * -------------------- ----------- -------------------------------------- * a_inth_it_handlers SYS_FUNC ** Indirect function address for IRQ and * FIQ on main interrupt handler. * a_inth2_irq_handlers SYS_FUNC * Indirect function address for IRQ on * 2nd level interrupt handler. * d_inth_dummy SYS_UWORD32 Count the number of unwanted interrupts */ SYS_FUNC a_inth_it_handlers[C_INTH_NUM_INT][2] = { // IRQ FIQ { f_inth_dummy, f_inth_dummy }, // 0 : WATCHDOG TIMER { f_inth_dummy, f_inth_dummy }, // 1 : TIMER 1 { f_inth_dummy, f_inth_dummy }, // 2 : TIMER 2 { f_inth_dummy, f_inth_dummy }, // 3 : TSP RECEIVE { f_inth_dummy, f_inth_dummy }, // 4 : TPU FRAME { f_inth_dummy, f_inth_dummy }, // 5 : TPU PAGE { f_inth_dummy, f_inth_dummy }, // 6 : SIM { f_inth_dummy, f_inth_dummy }, // 7 : UART_MODEM1 { f_inth_dummy, f_inth_dummy }, // 8 : KEYBOARD { f_inth_dummy, f_inth_dummy }, // 9 : RTC_TIMER { f_inth_dummy, f_inth_dummy }, // 10 : RTC_ALARM { f_inth_dummy, f_inth_dummy }, // 11 : ULPD_GAUGING { f_inth_dummy, f_inth_dummy }, // 12 : ABB_IRQ { f_inth_dummy, f_inth_dummy }, // 13 : SPI { f_inth_dummy, f_inth_dummy }, // 14 : DMA { f_inth_dummy, f_inth_dummy }, // 15 : API { f_inth_dummy, f_inth_dummy }, // 16 : GPIO { f_inth_dummy, f_inth_dummy }, // 17 : ABB_FIQ { f_inth_dummy, f_inth_dummy }, // 18 : UART_IRDA { f_inth_dummy, f_inth_dummy }, // 19 : ULPD GSM TIMER { f_inth_dummy, f_inth_dummy }, // 20 : GEA { f_inth_dummy, f_inth_dummy }, // 21 : EXTERNAL IRQ 1 { f_inth_dummy, f_inth_dummy }, // 22 : EXTERNAL IRQ 2 { f_inth_dummy, f_inth_dummy }, // 23 : USIM Card Detect { f_inth_dummy, f_inth_dummy }, // 24 : USIM { f_inth_dummy, f_inth_dummy }, // 25 : LCD { f_inth_dummy, f_inth_dummy }, // 26 : USB { f_inth_dummy, f_inth_dummy }, // 27 : MMC/SD/MS { f_inth_dummy, f_inth_dummy }, // 28 : UART_MODEM2 { f_inth_2nd_level_handler, f_inth_dummy }, // 29 : 2nd Interrupt Handler { f_inth_dummy, f_inth_dummy }, // 30 : I2C { f_inth_dummy, f_inth_dummy } // 31 : NAND FLASH }; SYS_FUNC a_inth2_irq_handlers[C_INTH_2ND_NUM_INT] = { f_inth_dummy, // 0 : RNG f_inth_dummy, // 1 : SHA1/MD5 f_inth_dummy, // 2 : EMPU f_inth_dummy, // 3 : Secure DMA f_inth_dummy // 4 : Secure TIMER }; SYS_UWORD32 d_inth_dummy = 0L; /****************************************************************************** * * FUNCTION NAME: f_inth_dummy * Handle dummy interrupts. Call of this function should never occurs * * * ARGUMENT LIST: * * Argument Type IO Description * ------------ ------------------- -- --------------------------------- * chip-select. * * RETURN VALUE: None * *****************************************************************************/ void f_inth_dummy(void) { d_inth_dummy++; } /* f_inth_dummy() */ /****************************************************************************** * * FUNCTION NAME: f_inth_irq_handler * Entry point of ARM IRQ sub-routine. * * * ARGUMENT LIST: * * Argument Type IO Description * ------------ ------------------- -- --------------------------------- * * RETURN VALUE: None * *****************************************************************************/ void f_inth_irq_handler(void) { a_inth_it_handlers[F_INTH_GET_IRQ][C_INTH_IRQ](); /* ACK IT */ F_INTH_VALID_NEXT(C_INTH_IRQ); /* valid next IRQ */ } /* f_inth_irq_handler() */ /****************************************************************************** * * FUNCTION NAME: f_inth_fiq_handler * Entry point of ARM FIQ sub-routine. * * * ARGUMENT LIST: * * Argument Type IO Description * ------------ ------------------- -- --------------------------------- * * RETURN VALUE: None * *****************************************************************************/ void f_inth_fiq_handler(void) { a_inth_it_handlers[F_INTH_GET_FIQ][C_INTH_FIQ](); /* ACK IT */ F_INTH_VALID_NEXT(C_INTH_FIQ); /* valid next FIQ */ } /* f_inth_fiq_handler() */ /****************************************************************************** * * FUNCTION NAME: f_inth_2nd_level_handler * Sub-routine to manage 2nd level interrupt handler. * * * ARGUMENT LIST: * * Argument Type IO Description * ------------ ------------------- -- --------------------------------- * * RETURN VALUE: None * *****************************************************************************/ void f_inth_2nd_level_handler(void) { a_inth2_irq_handlers[F_INTH2_GET_IRQ](); /* ACK IT */ F_INTH2_VALID_NEXT(C_INTH_IRQ); /* Valid next IRQ */ } /* f_inth_2nd_level_handler() */ #endif /* (CHIPSET == 12) */