FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_core/timer/timer_sec.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer_sec.h Description : timer_sec.c header Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.3 Date and time : 07/23/98 16:25:53 Previous delta : 07/23/98 16:25:52 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release1.5/mod/emu/EMU_MCMP/eva3_drivers/source/SCCS/s.timer.h Sccs Id (SID) : '@(#) timer.h 1.3 07/23/98 16:25:53 ' *****************************************************************************/ #include "l1sw.cfg" #include "chipset.cfg" #if (CHIPSET == 12) #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif #define TIMER_SEC_CNTL_REG MEM_TIMER_SEC_ADDR /* Secure watchdog Control Timer register */ #define TIMER_SEC_LOAD_REG (MEM_TIMER_SEC_ADDR + 0x02) /* Timer load register */ #define TIMER_SEC_READ_REG (MEM_TIMER_SEC_ADDR + 0x02) /* Timer read register */ #define TIMER_SEC_MODE_REG (MEM_TIMER_SEC_ADDR + 0x04) /* Timer mode register */ /*---------------------------------------------------------------/ /* TIMER_SEC_START_STOP () */ /*--------------------------------------------------------------*/ /* Parameters : start or stop command */ /* Return : none */ /* Functionality : Start or Stop the timer */ /*--------------------------------------------------------------*/ #define TIMER_SEC_START_STOP(startStop) ((startStop) ? ((* (volatile SYS_UWORD16 *) TIMER_SEC_CNTL_REG) |= TIMER_ST) : \ ((* (volatile SYS_UWORD16 *) TIMER_SEC_CNTL_REG) &= ~TIMER_ST)) /* Prototype of the functions */ void TM_SEC_DisableWatchdog(void); void TM_SEC_EnableWatchdog(void); void TM_SEC_ResetWatchdog(SYS_UWORD16 cnt); SYS_UWORD16 TIMER_SEC_Read (SYS_UWORD16); SYS_UWORD16 TIMER_SEC_WriteValue (SYS_UWORD16); SYS_UWORD16 TIMER_SEC_ReadValue (void); #endif /* CHIPSET == 12 */