view src/cs/layer1/audio_cfile/l1audio_init.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1AUDIO_INIT.C
 *
 *        Filename l1audio_init.c
 *  Copyright 2003 (C) Texas Instruments
 *
 ************* Revision Controle System Header *************/

/************************************/
/* Include files...                 */
/************************************/

#include "l1_macro.h"
#include "l1_confg.h"


  #include "l1_types.h"
  #include "sys_types.h"

  #if (CODE_VERSION == SIMULATION) && (AUDIO_SIMULATION)


    #include <stdlib.h>
    #include <string.h>

    #include "iq.h"             // Debug / Init hardware  ("eva3.lib")
    #include "l1_ver.h"
    #include "l1_const.h"
    #include "l1_signa.h"

    #if TESTMODE
      #include "l1tm_defty.h"
    #endif

    #include "l1audio_const.h"
    #include "l1audio_cust.h"
    #include "l1audio_defty.h"
    #include "l1audio_msgty.h"
    #include "l1audio_varex.h"

    #if (L1_GTT == 1)
      #include "l1gtt_const.h"
      #include "l1gtt_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_DYN_DSP_DWNLD == 1)
      #include "l1_dyn_dwl_const.h"
      #include "l1_dyn_dwl_defty.h"
    #endif
    #if (L1_MP3 == 1)
      #include "l1mp3_defty.h"
    #endif

    #if (L1_MIDI == 1)
      #include "l1midi_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_AAC == 1)
      #include "l1aac_defty.h"
    #endif
    #include "l1_defty.h"
    #include "cust_os.h"
    #include "l1_msgty.h"
    #include "l1_varex.h"
    #include "l1_mftab.h"
    #include "l1_tabs.h"
    #include "l1_ctl.h"

    #include "l1_time.h"
    #include "l1_scen.h"
  #else // NOT SIMULATION

  // Layer1 and debug include files.
    #include <ctype.h>
    #include <math.h>
    #include "l1_ver.h"
    #include "l1_const.h"
    #include "l1_signa.h"

    #if TESTMODE
      #include "l1tm_defty.h"
    #endif

    #include "l1audio_const.h"
    #include "l1audio_cust.h"
    #include "l1audio_defty.h"
    #include "l1audio_msgty.h"
    #include "l1audio_varex.h"

    #if (L1_GTT == 1)
      #include "l1gtt_const.h"
      #include "l1gtt_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_DYN_DSP_DWNLD == 1)
      #include "l1_dyn_dwl_const.h"
      #include "l1_dyn_dwl_defty.h"
    #endif
    #if (L1_MP3 == 1)
      #include "l1mp3_defty.h"
    #endif

    #if (L1_MIDI == 1)
      #include "l1midi_defty.h"
    #endif
//added here from e-sample for AAC
    #if (L1_AAC == 1)
      #include "l1aac_defty.h"
    #endif

    #include "l1_defty.h"
    #include "cust_os.h"
    #include "l1_msgty.h"
    #include "tpudrv.h"       // TPU drivers.           ("eva3.lib")
    #include "l1_varex.h"
    #include "l1_proto.h"
    #include "l1_mftab.h"
    #include "l1_tabs.h"
    #include "mem.h"
    #include "armio.h"
    #include "timer.h"
    #include "timer1.h"
    #include "dma.h"
    #include "inth.h"
    #include "ulpd.h"
    #include "rhea_arm.h"
    #include "clkm.h"         // Clockm  ("eva3.lib")
    #include "l1_ctl.h"
    #include "l1_time.h"

    #if L2_L3_SIMUL
      #include "l1_scen.h"
    #endif
  #endif // NOT_SIMULATION

#if (L1_DRC == 1)
  extern T_DRC_MCU_DSP *drc_ndb;
  #if (CODE_VERSION == SIMULATION)
    extern T_DRC_MCU_DSP drc_ndb_sim;
  #endif
#endif

#if(L1_BT_AUDIO ==1)
  extern T_L1_BT_AUDIO bt_audio;
#endif

  /**************************************/
  /* Prototypes for L1 initialization   */
  /**************************************/
  void l1audio_dsp_init        (void);
  void l1audio_initialize_var  (void);

  /**************************************/
  /* External prototypes                */
  /**************************************/

  /*-------------------------------------------------------*/
  /* l1audio_dsp_init()                                    */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : Initialize the part of the API          */
  /*               dedicated to the audio task.            */
  /*                                                       */
  /*-------------------------------------------------------*/
  void l1audio_dsp_init(void)
  {
    UWORD8  i, j;

    //-----------------------------------
    // AUDIO control words initialization
    //-----------------------------------
    l1s_dsp_com.dsp_ndb_ptr->d_toneskb_init     = 0;             // MCU/DSP audio task com. register
    l1s_dsp_com.dsp_ndb_ptr->d_toneskb_status   = 0;             // MCU/DSP audio task com. register

    #if (KEYBEEP)
      l1s_dsp_com.dsp_ndb_ptr->d_k_x1_kt0       = 0;             // keybeep variable
      l1s_dsp_com.dsp_ndb_ptr->d_k_x1_kt1       = 0;             // keybeep variable
      l1s_dsp_com.dsp_ndb_ptr->d_dur_kb         = 0;             // keybeep variable
    #endif

    #if ((TONE) || (VOICE_MEMO))
      l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t0        = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t1        = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t2        = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_pe_rep         = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_pe_off         = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_se_off         = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_bu_off         = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_t0_on          = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_t0_off         = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_t1_on          = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_t1_off         = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_t2_on          = 0;             // tone variable
      l1s_dsp_com.dsp_ndb_ptr->d_t2_off         = 0;             // tone variable

      l1s_dsp_com.dsp_ndb_ptr->d_shiftul        = 0x100;
      l1s_dsp_com.dsp_ndb_ptr->d_shiftdl        = 0x100;
    #endif // (TONE) || (VOICE_MEMO)
    #if (L1_PCM_EXTRACTION)
      l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_upload         = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_download       = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_error          = 0;
    #endif

  // Correction of PR G23M/L1_MCU-SPR-15494
  #if ((CHIPSET == 12) || (CHIPSET == 15))
    #if (DSP == 35) || (DSP == 36) || (DSP == 37) || (DSP == 38) || (DSP == 39)
      l1s_dsp_com.dsp_ndb_ptr->d_cport_init      = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_cport_ctrl      = 0;
      l1s_dsp_com.dsp_ndb_ptr->a_cport_cfr[0]    = 0;
      l1s_dsp_com.dsp_ndb_ptr->a_cport_cfr[1]    = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_cport_tcl_tadt  = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_cport_tdat      = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_cport_tvs       = 0;
    #endif
  #endif

    #if (L1_VOICE_MEMO_AMR)
      l1s_dsp_com.dsp_ndb_ptr->d_shiftul        = 0x100;
    #endif // L1_VOICE_MEMO_AMR

    #if (MELODY_E1)
      l1s_dsp_com.dsp_ndb_ptr->d_melo_osc_used    = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_melo_osc_active  = 0;

      l1s_dsp_com.dsp_ndb_ptr->a_melo_note0[0]    = SC_END_OSCILLATOR_MASK;
      l1s_dsp_com.dsp_ndb_ptr->a_melo_note1[0]    = SC_END_OSCILLATOR_MASK;
      l1s_dsp_com.dsp_ndb_ptr->a_melo_note2[0]    = SC_END_OSCILLATOR_MASK;
      l1s_dsp_com.dsp_ndb_ptr->a_melo_note3[0]    = SC_END_OSCILLATOR_MASK;
      l1s_dsp_com.dsp_ndb_ptr->a_melo_note4[0]    = SC_END_OSCILLATOR_MASK;
      l1s_dsp_com.dsp_ndb_ptr->a_melo_note5[0]    = SC_END_OSCILLATOR_MASK;
      l1s_dsp_com.dsp_ndb_ptr->a_melo_note6[0]    = SC_END_OSCILLATOR_MASK;
      l1s_dsp_com.dsp_ndb_ptr->a_melo_note7[0]    = SC_END_OSCILLATOR_MASK;
    #endif // MELODY_E1

    // Initialize the FIR as an all band pass
    // IMPORTANT NOTE: FIR/DL parameters are also initialized for DSP 36 when L1_IIR == 1 because
    // in FIR loop mode, the old FIR API is still used
    #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) || (DSP == 37) || (DSP == 38) || (DSP == 39)// The FIR coefficents are in param memory
      l1s_dsp_com.dsp_param_ptr->a_fir31_downlink[0] = 0x4000;
      l1s_dsp_com.dsp_param_ptr->a_fir31_uplink[0]   = 0x4000;
    #else
      l1s_dsp_com.dsp_ndb_ptr->a_fir31_downlink[0]   = 0x4000;
      l1s_dsp_com.dsp_ndb_ptr->a_fir31_uplink[0]     = 0x4000;
    #endif

    for (i=1; i<MAX_FIR_COEF; i++)
    {
      #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) || (DSP == 37) || (DSP == 38) || (DSP == 39)// The FIR coefficents are in param memory
        l1s_dsp_com.dsp_param_ptr->a_fir31_downlink[i]  = 0;
        l1s_dsp_com.dsp_param_ptr->a_fir31_uplink[i]    = 0;
      #else
        l1s_dsp_com.dsp_ndb_ptr->a_fir31_downlink[i]    = 0;
        l1s_dsp_com.dsp_ndb_ptr->a_fir31_uplink[i]      = 0;
      #endif
    }
    #if (DSP == 17) || (DSP == 32)
      // start the FIR task
      l1s_dsp_com.dsp_ndb_ptr->d_audio_init |= B_FIR_START;
    #endif

    #if (L1_IIR == 1)
      // IIR enabled by default
      // Set the default configuration (all band pass - FIR only mode)
      l1s_dsp_com.dsp_ndb_ptr->d_iir_nb_iir_blocks = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir_nb_fir_coefs  = 0x1f;

      l1s_dsp_com.dsp_ndb_ptr->a_iir_fir_coefs[0]  = 0x4000;
      for (i=1; i < (l1s_dsp_com.dsp_ndb_ptr->d_iir_nb_fir_coefs - 1); i++)
        l1s_dsp_com.dsp_ndb_ptr->a_iir_fir_coefs[i] = 0;
      
      l1s_dsp_com.dsp_ndb_ptr->d_iir_input_scaling       = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir_fir_scaling         = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir_input_gain_scaling  = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir_output_gain_scaling = 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir_output_gain         = 0xffff;
      l1s_dsp_com.dsp_ndb_ptr->d_iir_feedback            = 0;
    #endif

    #if (AUDIO_MODE)
      // Reset the FIR loopback and the audio mode
      l1s_dsp_com.dsp_ndb_ptr->d_audio_init &= ~(B_FIR_LOOP | B_GSM_ONLY | B_BT_HEADSET | B_BT_CORDLESS);
      // Set the GSM mode
      l1s_dsp_com.dsp_ndb_ptr->d_audio_init |= B_GSM_ONLY;
    #else
      // Reset the loopback
      l1s_dsp_com.dsp_ndb_ptr->d_audio_init &= ~(B_FIR_LOOP);
    #endif

   #if (W_A_DSP_SR_BGD)
     // Initialize the DSP speech reco background task

     // DSP background enabled for SR.
     l1s_dsp_com.dsp_param_ptr->d_gsm_bgd_mgt = (B_DSPBGD_RECO | B_DSPBGD_UPD);
     l1s_dsp_com.dsp_ndb_ptr->d_max_background = 7;

     // TEMPORARY: Init DSP background interface for RECO.
     if (l1s_dsp_com.dsp_param_ptr->d_gsm_bgd_mgt & B_DSPBGD_RECO)
     {
       l1s_dsp_com.dsp_ndb_ptr->d_background_enable &= ~(1 << C_BGD_RECOGN);
       l1s_dsp_com.dsp_ndb_ptr->d_background_abort  &= ~(1 << C_BGD_RECOGN);
       l1s_dsp_com.dsp_ndb_ptr->a_background_tasks[C_BGD_RECOGN] = (C_BGD_RECOGN<<11) | 1;
       l1s_dsp_com.dsp_ndb_ptr->a_back_task_io[C_BGD_RECOGN]     = (API)(0x0000); // Not used by Recognition task.
     }
     if (l1s_dsp_com.dsp_param_ptr->d_gsm_bgd_mgt & B_DSPBGD_UPD)
     {
       l1s_dsp_com.dsp_ndb_ptr->d_background_enable &= ~(1 << C_BGD_ALIGN);
       l1s_dsp_com.dsp_ndb_ptr->d_background_abort  &= ~(1 << C_BGD_ALIGN);
       l1s_dsp_com.dsp_ndb_ptr->a_background_tasks[C_BGD_ALIGN]  = (C_BGD_ALIGN<<11)  | 1;
       l1s_dsp_com.dsp_ndb_ptr->a_back_task_io[C_BGD_ALIGN]      = (API)(0x0000); // Not used by Alignement task.
     }
   #elif (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) || (DSP == 37) || (DSP == 38) || (DSP == 39)
     // DSP background task through pending task queue
     l1s_dsp_com.dsp_param_ptr->d_gsm_bgd_mgt = 0;
   #endif

    #if (MELODY_E2)
      // Initalize the Audio compressor used for E2
      l1s_dsp_com.dsp_ndb_ptr->d_audio_compressor_ctrl = 0x0401;

      // Initialize the melody E2 variables
      l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_osc_stop             = 0x0000;
      l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_osc_active           = 0x0000;
      l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_semaphore            = 0x0000;
      for(i=0; i<SC_MELODY_E2_NUMBER_OF_OSCILLATOR; i++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_melody_e2_osc[i][0] = 0x0000;
      }
      l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor     = 0x0000;

      for (i=0; i<(SC_AUDIO_MELODY_E2_MAX_NUMBER_OF_INSTRUMENT); i++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_melody_e2_instrument_ptr[i]  = 0x0000;
      }

      /* FreeCalypso: reconstructed from disassembly of TCS211 object */
      l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_deltatime = 0;

      // Reset the flag to know if the DSP melody E2 task runs
      l1s.melody_e2.dsp_task = FALSE;
    #endif // MELODY_E2

    #if ((DSP==33) || (DSP == 34) || (DSP==35) || (DSP==36) || (DSP == 37) || (DSP == 38) || (DSP == 39))
      // Linked to E2 melody
      // In case of WCP, there is a WCP variable at this address
      l1s_dsp_com.dsp_ndb_ptr->d_melody_selection = NO_MELODY_SELECTED;
    #endif


    #if ((CHIPSET == 4) || (CHIPSET == 12) || (CHIPSET == 15) || ((CHIPSET==10) && (OP_WCP==1))) && ((DSP == 36) || (DSP == 37) || (DSP == 38) || (DSP == 39))
      l1s_dsp_com.dsp_ndb_ptr->d_es_ctrl            = 0;             // ES control
      l1s_dsp_com.dsp_ndb_ptr->d_anr_ul_ctrl        = 0;             // ANR control
      #if (L1_IIR == 1)
        l1s_dsp_com.dsp_ndb_ptr->d_iir_dl_ctrl    = B_IIR_ENABLE;  // IIR control: enabled by default
      #else
        l1s_dsp_com.dsp_ndb_ptr->d_iir_dl_ctrl    = 0;
      #endif
      l1s_dsp_com.dsp_ndb_ptr->d_lim_dl_ctrl      = 0;             // Limiter control

    #endif

#if (DSP == 38) || (DSP == 39)

    //-----------------------------------
    // AUDIO control words initialization
    //-----------------------------------

      l1s_dsp_com.dsp_ndb_ptr->d_es_ctrl            = 0;             // ES control
      l1s_dsp_com.dsp_ndb_ptr->d_anr_ul_ctrl        = 0;             // ANR control
      l1s_dsp_com.dsp_ndb_ptr->d_aec_ul_ctrl        = 0;             // AEC control
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_ctrl        = 0;             // AGC control

      #if (L1_IIR == 1)
        l1s_dsp_com.dsp_ndb_ptr->d_iir_dl_ctrl      = B_IIR_ENABLE;  // IIR control: enabled by default
      #else
        l1s_dsp_com.dsp_ndb_ptr->d_iir_dl_ctrl      = 0;
      #endif
      l1s_dsp_com.dsp_ndb_ptr->d_lim_dl_ctrl        = 0;             // Limiter control
      l1s_dsp_com.dsp_ndb_ptr->d_drc_dl_ctrl        = 0;             // DRC control
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_ctrl        = 0;             // AGC control
      l1s_dsp_com.dsp_ndb_ptr->d_audio_apps_ctrl    = 0;             // WCM control
      l1s_dsp_com.dsp_ndb_ptr->d_audio_apps_status  = 0;             // WCM status
      l1s_dsp_com.dsp_ndb_ptr->d_aqi_status         = 0;             // Initialise the status word

#if(L1_ANR == 2)
      l1s_dsp_com.dsp_ndb_ptr->d_anr_control          = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_anr_ns_level         = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_anr_tone_ene_th      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_anr_tone_cnt_th      = (API) 0;
#endif

#if(L1_IIR == 2)
      // Set IIR parameters
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_control         = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_frame_size      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_fir_swap        = (API) 0;
      
      // Set parameter os FIR part
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_fir_enable      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_fir_length      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_fir_shift       = (API) 0;

      for (i=0; i < IIR_4X_FIR_MAX_LENGTH; i++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_fir_taps[i]   = (API) 0;
      }

      // Set parameters for IIR part
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_enable      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_number      = (API) 0;

      // Set parameters for IIR part - SOS 1 
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_1      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_form_1 = (API) 0;

      for (j=0; j < IIR_4X_ORDER_OF_SECTION; j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_den_1[j]  = (API) 0;
      }
      for (j=0; j <  (IIR_4X_ORDER_OF_SECTION + 1); j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_num_1[j]  = (API) 0;
      }
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_num_form_1  = (API) 0;

      // Set parameters for IIR part - SOS 2 
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_2      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_form_2 = (API) 0;

      for (j=0; j < IIR_4X_ORDER_OF_SECTION; j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_den_2[j]  = (API) 0;
      }
      for (j=0; j <  (IIR_4X_ORDER_OF_SECTION + 1); j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_num_2[j]  = (API) 0;
      }
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_num_form_2  = (API) 0;

      // Set parameters for IIR part - SOS 3 
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_3      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_form_3 = (API) 0;

      for (j=0; j < IIR_4X_ORDER_OF_SECTION; j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_den_3[j]  = (API) 0;
      }
      for (j=0; j <  (IIR_4X_ORDER_OF_SECTION + 1); j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_num_3[j]  = (API) 0;
      }
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_num_form_3  = (API) 0;

      // Set parameters for IIR part - SOS 4 
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_4      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_form_4 = (API) 0;

      for (j=0; j < IIR_4X_ORDER_OF_SECTION; j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_den_4[j]  = (API) 0;
      }
      for (j=0; j <  (IIR_4X_ORDER_OF_SECTION + 1); j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_num_4[j]  = (API) 0;
      }
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_num_form_4  = (API) 0;

      // Set parameters for IIR part - SOS 5 
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_5      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_form_5 = (API) 0;

      for (j=0; j < IIR_4X_ORDER_OF_SECTION; j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_den_5[j]  = (API) 0;
      }
      for (j=0; j <  (IIR_4X_ORDER_OF_SECTION + 1); j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_num_5[j]  = (API) 0;
      }
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_num_form_5  = (API) 0;

      // Set parameters for IIR part - SOS 6 
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_6      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_fact_form_6 = (API) 0;

      for (j=0; j < IIR_4X_ORDER_OF_SECTION; j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_den_6[j]  = (API) 0;
      }
      for (j=0; j <  (IIR_4X_ORDER_OF_SECTION + 1); j++)
      {
        l1s_dsp_com.dsp_ndb_ptr->a_iir4x_sos_num_6[j]  = (API) 0;
      }
      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_sos_num_form_6  = (API) 0;

      l1s_dsp_com.dsp_ndb_ptr->d_iir4x_gain            = (API) 0;

#endif

#if(L1_AGC_UL == 1)
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_control                = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_frame_size             = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_targeted_level         = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_signal_up              = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_signal_down            = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_max_scale              = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_gain_smooth_alpha      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_gain_smooth_alpha_fast = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_gain_smooth_beta       = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_gain_smooth_beta_fast  = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_ul_gain_intp_flag         = (API) 0;
#endif

#if(L1_AGC_DL == 1)
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_control                = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_frame_size             = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_targeted_level         = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_signal_up              = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_signal_down            = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_max_scale              = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_gain_smooth_alpha      = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_gain_smooth_alpha_fast = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_gain_smooth_beta       = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_gain_smooth_beta_fast  = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_agc_dl_gain_intp_flag         = (API) 0;
#endif

#if(L1_WCM == 1)

      l1s_dsp_com.dsp_ndb_ptr->d_wcm_mode             = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_wcm_frame_size       = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_wcm_num_sub_frames   = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_wcm_ratio            = (API) 0;
      l1s_dsp_com.dsp_ndb_ptr->d_wcm_threshold        = (API) 0;
#endif

#endif // DSP 38

}


#if (AUDIO_TASK == 1)

  /*-------------------------------------------------------*/
  /* l1audio_initialize_var()                              */
  /*-------------------------------------------------------*/
  /*                                                       */
  /* Parameters :                                          */
  /*                                                       */
  /* Return     :                                          */
  /*                                                       */
  /* Description : Initialize the part of l1a, l1s and     */
  /*               l1a_l1s_com dedicated to the audio task.*/
  /*                                                       */
  /*-------------------------------------------------------*/
  void l1audio_initialize_var(void)
  {
    UWORD8 i, j;

    // Initialize the state of the L1S maanger...
    //--------------------------------------------
    for(i=0; i<NBR_AUDIO_MANAGER; i++)
    {
      l1s.audio_state[i] = 0;
    }

    #if (L1_EXTERNAL_AUDIO_VOICE_ONOFF == 1)
      l1a_l1s_com.audio_onoff_task.parameters.onoff_value = FALSE;
    #endif
    #if 0	/* FreeCalypso TCS211 reconstruction */
      l1a_l1s_com.audio_forced_by_l1s = FALSE;
    #endif

    #if (MELODY_E1)
      l1s.melody0.oscillator[0] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note0[0]);
      l1s.melody0.oscillator[1] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note1[0]);
      l1s.melody0.oscillator[2] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note2[0]);
      l1s.melody0.oscillator[3] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note3[0]);
      l1s.melody0.oscillator[4] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note4[0]);
      l1s.melody0.oscillator[5] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note5[0]);
      l1s.melody0.oscillator[6] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note6[0]);
      l1s.melody0.oscillator[7] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note7[0]);

      l1s.melody1.oscillator[0] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note0[0]);
      l1s.melody1.oscillator[1] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note1[0]);
      l1s.melody1.oscillator[2] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note2[0]);
      l1s.melody1.oscillator[3] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note3[0]);
      l1s.melody1.oscillator[4] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note4[0]);
      l1s.melody1.oscillator[5] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note5[0]);
      l1s.melody1.oscillator[6] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note6[0]);
      l1s.melody1.oscillator[7] = &(l1s_dsp_com.dsp_ndb_ptr->a_melo_note7[0]);
    #endif // MELODY_E1

    #if (MELODY_E2)
      // Initialization ofthe audio background melody E2 load insturment variable
        audioback_melody_e2.allowed_size =
          SC_AUDIO_MELODY_E2_MAX_SIZE_OF_INSTRUMENT;
        audioback_melody_e2.API_address =
        l1s_dsp_com.dsp_ndb_ptr->a_melody_e2_instrument_wave;

        for (i=0; i < SC_AUDIO_MELODY_E2_MAX_NUMBER_OF_INSTRUMENT; i++)
        {
          audioback_melody_e2.number_of_user[i] = 0;
        }
    #endif // MELODY_E2

    #if (L1_STEREOPATH == 1)
      // Reset the stereopath L1S commands
      l1a_l1s_com.stereopath_drv_task.command.start = FALSE;
      l1a_l1s_com.stereopath_drv_task.command.stop  = FALSE;
    #endif

// Triton Audio ON/OFF Changes
#if (L1_AUDIO_MCU_ONOFF == 1)
    l1s.audio_on_off_ctl.l1_audio_switch_on_ul_request = 0;
    l1s.audio_on_off_ctl.l1_audio_switch_on_dl_request = 0;

    l1s.audio_on_off_ctl.l1_audio_ul_on2off_hold_time = 
        L1_AUDIO_ON2OFF_UL_HOLD_TIME;
    l1s.audio_on_off_ctl.l1_audio_dl_on2off_hold_time = 
        L1_AUDIO_ON2OFF_DL_HOLD_TIME;

    l1s.audio_on_off_ctl.l1_audio_ul_action = L1_AUDIO_NO_ACTION;
    l1s.audio_on_off_ctl.l1_audio_dl_action = L1_AUDIO_NO_ACTION;

    l1s.audio_on_off_ctl.l1_audio_ul_switched_on = FALSE;
    l1s.audio_on_off_ctl.l1_audio_dl_switched_on = FALSE;

    l1s.audio_on_off_ctl.l1_audio_ul_switched_off = TRUE;
    l1s.audio_on_off_ctl.l1_audio_dl_switched_off = TRUE;
#endif // L1_AUDIO_MCU_ONOFF 


#if (L1_DRC == 1)

  // init DRC NDB
  drc_ndb = (T_DRC_MCU_DSP *)API_address_dsp2mcu(C_DRC_API_BASE_ADDRESS);
  #if (CODE_VERSION == SIMULATION)
  {
    drc_ndb = &drc_ndb_sim;
  }
  #endif

  drc_ndb->d_drc_speech_mode_samp_f               =(API)0;
  drc_ndb->d_drc_num_subbands                     =(API)0;
  drc_ndb->d_drc_frame_len                        =(API)0;
  drc_ndb->d_drc_expansion_knee_fb_bs             =(API)0;
  drc_ndb->d_drc_expansion_knee_md_hg             =(API)0;
  drc_ndb->d_drc_expansion_ratio_fb_bs            =(API)0;
  drc_ndb->d_drc_expansion_ratio_md_hg            =(API)0;
  drc_ndb->d_drc_max_amplification_fb_bs          =(API)0;
  drc_ndb->d_drc_max_amplification_md_hg          =(API)0;
  drc_ndb->d_drc_compression_knee_fb_bs           =(API)0;
  drc_ndb->d_drc_compression_knee_md_hg           =(API)0;
  drc_ndb->d_drc_compression_ratio_fb_bs          =(API)0;
  drc_ndb->d_drc_compression_ratio_md_hg          =(API)0;
  drc_ndb->d_drc_energy_limiting_th_fb_bs         =(API)0;
  drc_ndb->d_drc_energy_limiting_th_md_hg         =(API)0;
  drc_ndb->d_drc_limiter_threshold_fb             =(API)0;
  drc_ndb->d_drc_limiter_threshold_bs             =(API)0;
  drc_ndb->d_drc_limiter_threshold_md             =(API)0;
  drc_ndb->d_drc_limiter_threshold_hg             =(API)0;
  drc_ndb->d_drc_limiter_hangover_spect_preserve  =(API)0;
  drc_ndb->d_drc_limiter_release_fb_bs            =(API)0;
  drc_ndb->d_drc_limiter_release_md_hg            =(API)0;
  drc_ndb->d_drc_gain_track_fb_bs                 =(API)0;
  drc_ndb->d_drc_gain_track_md_hg                 =(API)0;
  for (j=0; j < DRC_LPF_LENGTH; j++)
  {
    drc_ndb->a_drc_low_pass_filter[j]          = (API)0;
  }
  for (j=0; j < DRC_BPF_LENGTH; j++)
  {
    drc_ndb->a_drc_mid_band_filter[j]          = (API)0;
  }
#endif

}

#endif // AUDIO_TASK