FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/dyn_dwl_include/l1_dyn_dwl_signa.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_DYN_DWL_SIGNA.H * * Filename l1_dyn_dwl_signa.h * Copyright 2004 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (L1_DYN_DSP_DWNLD == 1) #ifndef _L1_DYN_DWL_SIGNA_H_ #define _L1_DYN_DWL_SIGNA_H_ #define P_DYN_DWNLD 0x41 // Messages L1S -> L1A #define L1_DYN_DWNLD_STOP_CON ( ( P_DYN_DWNLD << 8 ) | 0x02 ) // Messages API HISR -> L1A // #define API_L1_DYN_DWNLD_START_CON ( ( P_DYN_DWNLD << 8 ) | 0x03 ) #define API_L1_DYN_DWNLD_FINISHED ( ( P_DYN_DWNLD << 8 ) | 0x04 ) #define API_L1_DYN_DWNLD_STOP ( ( P_DYN_DWNLD << 8 ) | 0x05 ) #define API_L1_CRC_NOT_OK ( ( P_DYN_DWNLD << 8 ) | 0x07 ) #define API_L1_CRC_OK ( ( P_DYN_DWNLD << 8 ) | 0x08 ) #define API_L1_DYN_DWNLD_UNINST_OK ( ( P_DYN_DWNLD << 8 ) | 0x09 ) #endif //_L1_DYN_DWL_SIGNA_H_ #endif // L1_DYN_DSP_DWNLD