FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/gtt_include/ctm/m_sequence.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* ******************************************************************************* * * COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH * 90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100 * * The program(s) may be used and/or copied only with the * written permission from Ericsson or in accordance * with the terms and conditions stipulated in the agreement or * contract under which the program(s) have been supplied. * ******************************************************************************* * * File : m_sequence.h * Purpose : Calculation of m-sequences * (maximum-length sequecnes or pseudo noise) * ******************************************************************************* */ #ifndef m_sequence_h #define m_sequence_h "$Id: $" /* ******************************************************************************* * INCLUDE FILES ******************************************************************************* */ /* ******************************************************************************* * DECLARATION OF PROTOTYPES ******************************************************************************* */ /* -------------------------------------------------------------------- */ /* function m_sequence() */ /* ********************* */ /* Calculates one period of an m-sequence (binary pseudo noise). */ /* The sequence is stored in the vector sequence, which must have a */ /* of (2^r)-1, where r is an integer number between 2 and 10. */ /* Therefore, with this release of m_sequence, sequences of length */ /* 3, 7, 15, 31, 63, 127, 255, 511, or 1023 can be generated. */ /* The resulting sequence is bipolar, i.e. it has values -1 and +1. */ /* -------------------------------------------------------------------- */ void m_sequence(WORD16 *sequence, WORD16 length); #endif