FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/tm_cust0/l1tm_tpu10.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1TM_TPU10.C * * Filename l1tm_tpu10.c * Version 1.4 * Date 01/10/03 * ************* Revision Controle System Header *************/ #include "l1_confg.h" #if (TESTMODE && (RF==10)) #include "tm_defs.h" #include "l1_const.h" #include "l1_types.h" #include "l1tm_defty.h" #include "l1tm_cust.h" #include "l1tm_tpu10.h" #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #include "l1_defty.h" #include "l1_msgty.h" #include "l1_tabs.h" #include "l1tm_msgty.h" #include "l1tm_varex.h" #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) #include "spi_drv.h" #endif #include "sys_types.h" #include "general.h" #include "l1_time.h" #include "tpudrv.h" #include "tpudrv10.h" #include <string.h> // Import band configuration from Flash module (need to replace by an access function) // External function prototypes void Cust_tm_tpu_table_write (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[]) { /* INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE */ // fill in the cid tm_return->cid = TPU_TABLE_WRITE; switch (index) { default: tm_return->size = 0; tm_return->status = E_BADINDEX; break; } // end of switch } void Cust_tm_tpu_table_read (T_TM_RETURN *tm_return, WORD8 index) { /* INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE */ // fill in the cid tm_return->cid = TPU_TABLE_READ; switch (index) { default: tm_return->size = 0; tm_return->status = E_BADINDEX; break; } // end of switch } #endif //TESTMODE