view src/cs/riviera/rvt/rvt_gen.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
 *
 * tr_gen.h
 *
 * This file contain general definitions of Trace Module.
 * Definitions are exportable
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number	: 0.1
 *
 * History			: 0.1 (7/4/2000) - Created
 *
 * Date             : 7/4/2000
 *
 * Author           : Cristian Livadiotti, c-livadiotti@ti.com
 *
 ******************************************************************************/

#ifndef __RVT_GEN_H__
#define __RVT_GEN_H__

#include "rv/general.h"

/*
** If TRACE_MODULE is defined, the trace is using the trace task API.
** Otherwise, the trace is using the RVF.  NOW OBSOLETE !!!!!!!!
*/
//#define TRACE_MODULE


/*
** If FRAMING_PROTOCOL is defined, the trace mux should be used because of encapsulation and byte stuffing.
** Otherwise, the hyperterminal should be used.
*/
#define FRAMING_PROTOCOL


/*
** If MIXED_TRACE is defined, all traces are mixed on the same UART and the
** trace task handles the RX commands.
*/
//#define MIXED_TRACE

/*
** Type definitions
*/

/* Define return parameters.                                                     */
typedef enum {
	RVT_OK							= 0,
	RVT_NOT_SUPPORTED				= -2,
	RVT_NOT_READY					= -3,
	RVT_MEMORY_ERR					= -4,
	RVT_INTERNAL_ERR				= -9,
	RVT_INVALID_PARAMETER			= -10
} T_RVT_RET;



typedef UINT8  T_RVT_USER_ID;
typedef UINT32 T_RVT_MSG_LG;

typedef enum { 
	RVT_ASCII_FORMAT,   // 0
	RVT_BINARY_FORMAT   // 1
} T_RVT_FORMAT;


typedef UINT8 * T_RVT_BUFFER;

typedef char T_RVT_NAME;
#define RVT_NAME_MAX_LEN		(10)

#define RVT_RV_HEADER        0x11
#define RVT_L1_HEADER        0x12
#define RVT_L23_HEADER       0x13
#define RVT_TM_HEADER        0x14
#define RVT_RNET_HEADER      0x15
#define RVT_PROF_HEADER      0x16
#define RVT_GTTBACK_HEADER   0x17
#define RVT_OTHER_HEADER     0x18
/* FreeCalypso additions */
#define RVT_AT_HEADER        0x1A
#define RVT_EXTUI_HEADER     0x1B
#define RVT_TCH_HEADER       0x1C
#define RVT_KEEPALIVE_HEADER 0x1D
/* end of FreeCalypso additions */
#define RVT_INVALID_HEADER   0xFF

typedef void (*RVT_CALLBACK_FUNC)(T_RVT_BUFFER, UINT16);

/********* Fonction Prototypes ***********/
void
rvt_set_trace_level(T_RVT_BUFFER p_msg, UINT16 msg_length);

T_RVT_RET
rvt_send_trace_no_cpy(T_RVT_BUFFER p_buffer,
					 T_RVT_USER_ID user_id,
					 T_RVT_MSG_LG msg_lenght,
					 T_RVT_FORMAT msg_format);

T_RVT_RET 
rvt_send_trace_cpy(T_RVT_BUFFER msg,
				  T_RVT_USER_ID user_id,
				  T_RVT_MSG_LG msg_length,
				  T_RVT_FORMAT msg_format);


T_RVT_RET
rvt_register_id(T_RVT_NAME name[], T_RVT_USER_ID *tr_id, RVT_CALLBACK_FUNC callback);

T_RVT_RET
rvt_mem_alloc(T_RVT_USER_ID user_id, T_RVT_MSG_LG buffer_lenght, T_RVT_BUFFER * buff);

T_RVT_RET 
rvt_mem_free(T_RVT_BUFFER msg);


#endif