view src/cs/riviera/tests/rv/rv_test_regr.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/**
 * @file	rv_test_regr.h
 *
 * Definitions used for non-regression tests.
 *
 * @author	Cedric Baudelet
 * @author	Vincent Oberle
 */

/*
 * History:
 *
 *	Date       	Author					Modification
 *	-------------------------------------------------------------------
 *	09/29/00	Cedric Baudelet			Create.
 *	03/15/02	Vincent Oberle			Passed all remaining macros into function.
 *										Comment and formating cleaning.
 *
 * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef _RV_TEST_REGR_H_
#define _RV_TEST_REGR_H_

#include "tests/rv/rv_test.h"

#ifdef __cplusplus
extern "C"
{
#endif


/*
 * DO NOT MODIFY THIS FILE!
 * Add your test in the corresponding .c file only.
 */


/**
 * Define the MAX number of tests which it will be possible to execute during
 * the regression.
 */
#define MAX_NB_OF_TEST_TO_PASS (200)

/** Non-Regression test error type */
typedef T_RV_TEST_ERR_TYPE T_RV_REGR_ERR_TYPE;

/** Non-Regression test return value type */
typedef T_RV_TEST_RET T_RV_REGR_RET;


/** Non-Regression test configuration parameter */
typedef enum {
	TEST_LIST					=  0, /* Allows to execute chosen tests				*/
	TEST_LIST_RAND				= -2, /* Allows to execute rand chosen tests		*/ 
	TEST_ALL					= -3, /* Allows to execute all tests available		*/
	TEST_ALL_RAND				= -4  /* Allows to execute rand all tests available	*/
} T_RV_REGR_TEST_CFG;


/** Non-Regression test list contents */
typedef UINT8 T_RV_REGR_TEST_LIST_NBR;
typedef UINT8 T_RV_REGR_TEST_LIST_CFG;

#define CONFIG_A (0) /* DEVICE_A = SOURCE & DEVICE_B = TARGET	*/
#define CONFIG_B (1) /* DEVICE_A = TARGET & DEVICE_B = SOURCE	*/

typedef struct {
    T_RV_REGR_TEST_LIST_NBR	list_nbr;	/* Number of the executed test			*/
	T_RV_REGR_TEST_LIST_CFG	list_cfg;	/* Configuration of the executed test	*/
} T_RV_REGR_TEST_LIST;


/** Non-Regression test total number of tests */
typedef UINT16 T_RV_REGR_TEST_TOT;

/** Non-Regression test nb of occurence of each test */
typedef UINT8 T_RV_REGR_TEST_OCC;

/** Non-Regression test initialization parameter */
#define RV_REGR_RAND_INIT (1)


#ifdef __cplusplus
}
#endif

#endif /* _RV_TEST_REGR_ */