FreeCalypso > hg > fc-tourmaline

view src/cs/services/atp/atp_gsm_bt_api_misc.c @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
*
* File Name : atp_gsm_bt_api_misc.c
*
* This file defines all the dummy functions that may be called by CONDAT 
*
*
* Version number	: 0.1      Date : 10-Jully-2000
*
* History			: 0.1  - Created by E. Baissus
*
* Author			: Eric Baissus : e-baissus@ti.com
*
*   (C) Copyright 2000 by Texas Instruments Incorporated 
*****************************************************************************/

#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "atp/atp_api.h"
#include "atp/atp_config.h"
#include "atp/atp_messages.h"
#include "atp/atp_gsm_bt_api.h"
#include "atp/atp_gsm_gsm_api.h"
#include "atp/atp_config.h"
#include "atp/bti.h"

#ifndef _WINDOWS
	#include "config/rv.cfg"
#endif

#if (_GSM==1)
 
void bti_init_profile_req ( T_BTI_DEVICE_TYPE device,T_BTI_CONFIG config)
{
}

void bti_deinit_profile_req(T_BTI_DEVICE_TYPE device )
{
}

void bti_device_search_req(T_BTI_DEVICE_TYPE device )
{
}

void bti_connect_device_req(T_BTI_DEVICE_TYPE device,T_BTI_BD_ADDR bd_addr[])
{
}

void bti_connect_device_res(T_BTI_DEVICE_TYPE device, T_BTI_BD_ADDR bd_addr[],
						T_BTI_RESULT connect_accepted)
{
}
	
void bti_disconnect_device_req( T_BTI_DEVICE_TYPE device, T_BTI_BD_ADDR bd_addr[])
{
}

void bti_transfer_audio_in_req(T_BTI_DEVICE_TYPE device)
{
}

void bti_transfer_audio_out_req(T_BTI_DEVICE_TYPE device, T_BTI_BD_ADDR bd_addr[])
{
}

void bti_pin_res(T_BTI_DEVICE_TYPE device, T_BTI_BD_ADDR bd_addr[],
		T_BTI_PIN pin_code[])
{
}

void bti_reconfig_profile_req( T_BTI_DEVICE_TYPE device, T_BTI_CONFIG config)
{
}

void bti_device_control_req(T_BTI_DEVICE_TYPE device, T_BTI_REQ_ID req_id,
		unsigned char *control_data,unsigned short data_length)
{
}

void bti_device_control_res(T_BTI_DEVICE_TYPE device, T_BTI_RES_ID res_id,
		unsigned char *control_data,unsigned short data_length)
{
}

#endif