FreeCalypso > hg > fc-tourmaline
view src/cs/services/audio/audio_mode_i.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: audio_mode_i.h */ /* */ /* Purpose: This file contains symbolic constant used for the audio mode */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* 18 Jan 2002 Create */ /* */ /* Author Francois Mazard */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_AUDIO_MAIN_SWE #ifndef __AUDIO_MODE_I_H_ #define __AUDIO_MODE_I_H_ #ifdef __cplusplus extern "C" { #endif #if (ANLG_FAM == 1) /* Register mapping for OMEGA, NAUSICA */ /* VBCR register */ #define AUDIO_VBCR_VFBYP (0x0200) #define AUDIO_VBCR_VBDFAUXG (0x0100) #define AUDIO_VBCR_VSYNC (0x0080) #define AUDIO_VBCR_VCLKMODE (0x0040) #define AUDIO_VBCR_VALOOP (0x0020) #define AUDIO_VBCR_MICBIAS (0x0010) #define AUDIO_VBCR_VULSWITCH (0x0008) #define AUDIO_VBCR_VBUZ (0x0004) #define AUDIO_VBCR_VDLEAR (0x0002) #define AUDIO_VBCR_VDLAUX (0x0001) /* VBUR */ #define AUDIO_VBUR_DXEN (0x0200) #define AUDIO_VBUR_VDLST (0x000F) #define AUDIO_VBUR_VULPG (0x001F) /* VBDR */ #define AUDIO_VBDR_VDLPG (0x000F) #define AUDIO_VBDR_VOLCTL (0x000F) #endif #if (ANLG_FAM == 2) /* Register mapping for IOTA */ /* VBCR register */ #define AUDIO_VBCR_VFBYP (0x0200) #define AUDIO_VBCR_VBDFAUXG (0x0100) #define AUDIO_VBCR_VSYNC (0x0080) #define AUDIO_VBCR_VCLKMODE (0x0040) #define AUDIO_VBCR_VALOOP (0x0020) #define AUDIO_VBCR_MICBIAS (0x0010) #define AUDIO_VBCR_VULSWITCH (0x0008) #define AUDIO_VBCR_VBUZ (0x0004) #define AUDIO_VBCR_VDLEAR (0x0002) #define AUDIO_VBCR_VDLAUX (0x0001) /* VBCR2 */ #define AUDIO_VBCR2_MICBIASEL (0x0001) #define AUDIO_VBCR2_VDLHSO (0x0002) #define AUDIO_VBCR2_MICNAUX (0x0004) /* VBUR */ #define AUDIO_VBUR_DXEN (0x0200) #define AUDIO_VBUR_VDLST (0x000F) #define AUDIO_VBUR_VULPG (0x001F) /* VBDR */ #define AUDIO_VBDR_VDLPG (0x000F) #define AUDIO_VBDR_VOLCTL (0x000F) #endif #if (ANLG_FAM == 3) /* Register mapping for SYREN */ /* VBCR register */ #define AUDIO_VBCR_VFBYP (0x0200) #define AUDIO_VBCR_VBDFAUXG (0x0100) #define AUDIO_VBCR_VSYNC (0x0080) #define AUDIO_VBCR_VCLKMODE (0x0040) #define AUDIO_VBCR_VALOOP (0x0020) #define AUDIO_VBCR_MICBIAS (0x0010) #define AUDIO_VBCR_VULSWITCH (0x0008) /* VBCR2 */ #define AUDIO_VBCR2_MICBIASEL (0x0004) /* VBUR */ #define AUDIO_VBUR_DXEN (0x0200) #define AUDIO_VBUR_VDLST (0x01E0) #define AUDIO_VBUR_VULPG (0x001F) /* VBDR */ #define AUDIO_VBDR_VDLPG (0x000F) #define AUDIO_VBDR_VOLCTL (0x0070) #endif #ifdef __cplusplus } #endif #endif /* __AUDIO_MODE_I_H_ */ #endif /* #ifdef RVM_AUDIO_MAIN_SWE */