FreeCalypso > hg > fc-tourmaline
view src/cs/services/dar/dar_error_hdlr_i.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: dar_error_hdlr_i.h */ /* */ /* Purpose: This file contains routines used to report unrecoverable */ /* memory errors that might occur. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ---------------------------------------------------------------------- */ /* 27 September 2001 Create */ /* */ /* Author Stephanie Gerthoux */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_DAR_SWE #ifndef _DAR_ERROR_HDLR_I_H #define _DAR_ERROR_HDLR_I_H /* Id of the error trace */ #define DAR_ENTITY_NOT_START (0) #define DAR_ENTITY_NO_MEMORY (1) #define DAR_ERROR_STOP_EVENT (2) #define DAR_ERROR_START_EVENT (3) #define DAR_ENTITY_BAD_PARAMETER (4) #define DAR_ENTITY_BAD_MESSAGE (5) #define DAR_ENTITY_FILE_ERROR (7) #define DAR_ENTITY_FILE_NO_SAVED (8) #define DAR_ENTITY_FILE_NO_CLOSE (9) void dar_error_trace(UINT8 error_id); void dar_ffs_error_trace(UINT8 error_id); #endif #endif /* #ifdef RVM_DAR_SWE */