view src/g23m-aci/aci/line_split_intern.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  
|  Modul   :  line edit
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul ...
+-----------------------------------------------------------------------------
*/

#ifndef LINE_SPLIT_INTERN_H
#define LINE_SPLIT_INTERN_H

#define LEDIT_MAX_CMD_NAME_LEN (17)
#define LEDIT_MAX_S_NAME_LEN   (2)

#define SEARCH_BAT_LEN  (0)
#define SEARCH_DIAL_LEN (1)
#define SEARCH_EXT_LEN  (2)

#define BATCMD_NO_SUPP  (0)
#define BATCMD_SUPPORT  (1)
#define BATCMD_DIAL     (2) /* D <---- SPECIAL */
#define BATCMD_S_PARAM  (3) /* S <---- SPECIAL */

#define ANDCMD_NO_SUPP  (0)
#define ANDCMD_SUPPORT  (1)


typedef enum
{
  LEDIT_CHAR_TERMINATED = 0x00,
  LEDIT_CHAR_PERCENT    = 0x25, /* '%' */
  LEDIT_CHAR_AND        = 0x26, /* '&' */
  LEDIT_CHAR_PLUS       = 0x2B, /* '+' */
  LEDIT_CHAR_COMMA      = 0x2C, /* ',' */
  LEDIT_CHAR_NUMBER     = 0x30, /* '0' symbolic for 0..9 */
  LEDIT_CHAR_SEPARATOR  = 0x3B, /* ';' */
  LEDIT_CHAR_SET        = 0x3D, /* '=' */
  LEDIT_CHAR_READ       = 0x3F, /* '?' */
  LEDIT_CHAR_CHAR       = 0x41, /* 'A' symbolic for A..Z*/
  LEDIT_CHAR_EXT         = 0x5B, /*'[' symbolic for the rest of characters*/
  LEDIT_CHAR_INVALID    = 0xFF
} T_LEDIT_CHAR_TYPE;

typedef enum
{
  LEDIT_BASIC_NAME, /* consists of one char only */
  LEDIT_S_NAME,     /* first char must be 'S' and then only digits */
  LEDIT_EXT_NAME    /* multi char name           */
} T_LEDIT_NAME_TYPE;

typedef enum
{
  LEDIT_BASIC_PARAM, /* consists of digits  only */
  LEDIT_DIAL_PARAM,  /* the ending ';' is important to inform about voice or data call */
  LEDIT_EXT_PARAM    /* digits ,, "strings" ;    */
} T_LEDIT_PARAM_TYPE;

EXTERN T_LEDIT_RSLT ledit_split      (T_LEDIT_INTERN *leditInt);
EXTERN void         ledit_free_cmd   (T_LEDIT_INTERN *leditInt);

#endif